Products

Rigid PU Foam Polymeric Mdi Pm400 with High Viscosity

China Rigid PU Foam Polymeric Mdi Pm400 with High Viscosity, Find details about China "Mdi, High Viscosity from Rigid PU Foam Polymeric Mdi Pm400 with High Viscosity

Package
Drum
Appearance
Liquid
Product Name
Polyurethane Foam Mdi Building Raw Material
Trademark
COVESTRO
Transport Package
Iron Drum
Specification
250kg/Drum
Origin
China
HS Code
3909310000
Package
Drum
Appearance
Liquid
Product Name
Polyurethane Foam Mdi Building Raw Material
Trademark
COVESTRO
Transport Package
Iron Drum
Specification
250kg/Drum
Origin
China
HS Code
3909310000

WANNATE® PM-400
 

Application

WANNATE® PM-400 is high functionality, high viscosity isocyanate which has a functionality of 2.8~2.9. It can be used the production of rigid PU foam  and polyisocyanurate foams; particularly fit for continuous production of laminated polyisocyanurate slabstock foams. WANNATE® PM-400 can improve cell homogeneity and dimensional stability of foams and the compressive strength vertical to the foaming direction. The flame retardancy of polyurethane and polyisocyanurate foams also shows some improvement.
 

Typical physical and chemical properties

 

Item(s)
Specification(s)
AppearanceBrown Liquid
Viscosity at 25ºC,   mPa• s350~500
-NCO, %Wt30.5~32.0
Specific gravity at 25ºC, g/cm31.220~1.250
Acidity(HCI), %≤0.05
Hydrolysable Chlorine, %≤0.2

Package(s)
210L iron drums, 250kg/drum
 

Storage(s)

Since WANNATE® PM-400 is a reactive chemical, reaction with atmospheric moisture happens easily and leads to the formation of insoluble ureas and carbon dioxide gas, which can result in pressure build-up in closed containers and viscosity increase of the product. Containers must therefore be absolutely dry and carefully sealed after congested with nitrogen.
Containers of WANNATE® PM-400 should be kept properly closed and stored indoors at ambient temperature (15~35ºC) in a well-ventilated area. Storage at low temperature (below 0ºC) may lead to some crystallization; this material must, therefore, be protected from frost. If crystallization does occur, the material should be heated to 70-80ºC to melt it out, and should then be thoroughly agitated before use.
Extended storage at temperatures above 50ºC is not recommended to prevent from the formation of insoluble solids and viscosity increase.
 

Shelf Life

Under recommended storage conditions, the shelf life of WANNATE® PM-400 is one year  since the date of production.

 


Rigid PU Foam Polymeric Mdi Pm400 with High ViscosityRigid PU Foam Polymeric Mdi Pm400 with High ViscosityRigid PU Foam Polymeric Mdi Pm400 with High ViscosityRigid PU Foam Polymeric Mdi Pm400 with High ViscosityRigid PU Foam Polymeric Mdi Pm400 with High ViscosityRigid PU Foam Polymeric Mdi Pm400 with High ViscosityRigid PU Foam Polymeric Mdi Pm400 with High ViscosityRigid PU Foam Polymeric Mdi Pm400 with High ViscosityRigid PU Foam Polymeric Mdi Pm400 with High ViscosityRigid PU Foam Polymeric Mdi Pm400 with High ViscosityRigid PU Foam Polymeric Mdi Pm400 with High ViscosityRigid PU Foam Polymeric Mdi Pm400 with High Viscosity

You Might Also Like