Products

Liugong China Clg4215 215HP New Motor Grader with Front Dozer and Blade

Liugong China Clg4215 215HP New Motor Grader with Front Dozer and Blade, Find details about China Motor Grader Cutting Edge, Pull Behind Road Grader from Liugong China Clg4215 215HP New Motor Grader with Front Dozer and Blade

Model NO.
CLG4215
Trademark
LIUGONG
Transport Package
in Nude
Specification
8971*2600*3438mm
Origin
Guangxi, China
HS Code
84292090
Model NO.
CLG4215
Trademark
LIUGONG
Transport Package
in Nude
Specification
8971*2600*3438mm
Origin
Guangxi, China
HS Code
84292090
Liugong China Clg4215 215HP New Motor Grader with Front Dozer and blade

Product Description
  • Fuel Efficient Dongfeng Cummins Engine.
  • Low Vibration, Noise, Dust +UV Resistant cab
  • Meritor wet axle with "no-spin" differential lock as standard
  • Balance box enables the 4 rear wheels to swing up and down by +/- 15°

Technical Parameters
 
Engine DCEC 6BTAA5.9-C180
Rated Power (kW)125(170)@2200
Blade Width mm(inches)3960(156)
Maximum Speed km/h (mph)38 (23.6)
Draw Bar Pull(kN)81.6
Operating Weight kg(Lb)15000
ENGINE
Tier II
Make Dongfeng engine
Gross PowerkW(Hp)@rpm125(170)@2200
Net PowerkW(Hp)@rpm113(151)@2200
Peak Torque 750N.m/1300rpm
Torque Rise % 30%
Number of Cylinders 6
Aspiration turbo air-to-air aftercooled
TRANSMISSION
Transmission Type power shift
Transmission Configuration 6f/3r
Torque Converter three-member single turbine
Maximum Travel Speed, fwd(km/h)38
Maximum Travel Speed, rev(km/h)24.7
Number of Speeds, fwd 6
Number of Speeds, rev 3
AXLES 
Front Axle Make  LiuGong Weld axle
Rear Axle Make  Meritor
Differential Type NO-SPIN limited slip standard
Final Drive Type chain drive
Axle Oscillation ±15°
Front Axle Type all welded steel frame
Front Axle, Wheel Lean Angle ±17°
STEERING
Steering Configuration load sensor steering gear
Steering Relief Pressure(Mpa)17
Minimum Turning Radius(inches)7800(307)
Steering Angle ±45°
Frame Articulation Angle ±20°
BRAKES
Service Brake Type (Dry )shoe
Service Brake Location ear axle only
Service Brake Actuation hydraumatic
TIRES
Tire Size 17.5-25 PR12/L3
HYDRAULIC SYSTEM
Main Pump Type gear
Main Relief Pressure(Mpa)18
Pilot Pump Flow L(Gal)/min126(33)
WORKING CAPACITIES
Maximum Draw Pull(kN)81.6
Cutting Pressure kg(Lb)6800(14991)
TANDEM DRIVE PERFORMANCE
Heightmm(inches)600(24)
Widthmm(inches)210(8)
Thickness, inner wall / outer wallmm(inches)20/20(0.8/(0.8)
Center Distancemm(inches)1538(61)
Oscillating Angle ±15°
MOLDBOARD PERFORMANCE
Bank Cut Angle 40~70
Moldboard Lift Above Groundmm(inches)450(18)
Moldboard Side Shift, right / leftmm(inches)725/675(29/27)
Maximum Sloping Angle 90°
Cutting Depthmm(inches)555(22)
Circle Rotation 360°
Circle Diametermm(inches)1455(57)
Circle Thicknessmm(inches)135(5)
DIMENSIONS
Wheelbasemm(inches)6230(245)
Overall Lengthmm(inches)8790(346)
Overall Height with Cab 3438(135)
Overall Widthmm(inches)2600(102)
Clearance under Front Axlemm(inches)645(25)
Moldboard Standard Lengthmm(inches)3960(156)
Moldboard Standard Thicknessmm(inches)19(0.7)
Moldboard Standard Heightmm(inches)610(24)

Product Pictures
Liugong China Clg4215 215HP New Motor Grader with Front Dozer and Blade
Liugong China Clg4215 215HP New Motor Grader with Front Dozer and Blade
Liugong China Clg4215 215HP New Motor Grader with Front Dozer and Blade
Liugong China Clg4215 215HP New Motor Grader with Front Dozer and Blade



Company Information
Liugong China Clg4215 215HP New Motor Grader with Front Dozer and Blade
Liugong China Clg4215 215HP New Motor Grader with Front Dozer and Blade
Liugong China Clg4215 215HP New Motor Grader with Front Dozer and Blade
Liugong China Clg4215 215HP New Motor Grader with Front Dozer and Blade
 
 

You Might Also Like