High Accuracy Temperature Sensor Measuring Device with Disinfectant

China High Accuracy Temperature Sensor Measuring Device with Disinfectant, Find details about China Non-Conntact Forehead Thermometer, Temperature Measuring Instrument from High Accuracy Temperature Sensor Measuring Device with Disinfectant

Model NO.
TD111
Sensor
Infrared Sensor
Three Color Display
Blue, Yellow and Red
LCD Display
8 Inch Screen
Basic Data Sheet
Bluetooth, WiFi, 4G Lte
Protection Level
IP55
Transport Package
Strong Wooden Case
Specification
1850 x 150 x 330 mm
Origin
Make in China
Model NO.
TD111
Sensor
Infrared Sensor
Three Color Display
Blue, Yellow and Red
LCD Display
8 Inch Screen
Basic Data Sheet
Bluetooth, WiFi, 4G Lte
Protection Level
IP55
Transport Package
Strong Wooden Case
Specification
1850 x 150 x 330 mm
Origin
Make in China
 

Quick details:
Working temperature-20 ºC ~ 45 ºC
Temperature measurement range-20 ºC ~ 100 ºC
Temperature measurement tolerance± 0.1 ºC
Pass-through rate1.5 seconds per person (average data)
Working voltage3.3 ~ 5V, working current: 5 mA
Working powerAC110-220V, 50 / 60HZ
Disinfection solution1L as standard, 1000 persons / times
Powerless than 20W
Net weight30KG
Dimensions1850 mm (H) x 150 mm (W) x 330 mm (D)
Material304 stainless steel
Waterproof levelIP55
 
Introduction: 
Temperature measuring disinfection machine is made with high-precision infrared temperature sensor, whose 
inductor distance is 0 - 5 cm, 
With high precision and high resolution, immune to the environment and sunlight, small interference, 
measurement error ± 0.1 ºC at room temperature. The initial temperature setting is 37.3 ° C (adjustable).When the detection door is working, it will display an alarm when the detected actual body temperature 
exceeds 37.3 ° C. After the pedestrian measures the temperature, they can reach into the sterilizer and drop 
the disposable disinfectant solution automatically after sensing, so as to achieve the disinfection effect and 
prevent the virus in their hands from being constantly transmitted. 

Equipment installation
The installation of this equipment is very simple. It is recommended to choose an environmental area where 
the room temperature does not exceed 30 degrees and the low temperature does not fall below -10 degrees; 
After selecting the installation area of the device, fix the device at the bottom and plug it in and use it. 
Note: Please choose a level ground to install the equipment to prevent the equipment from tilting; the bottom 
must be fixed firmly to avoid falling down. 

Operation instructions 
1. Power on: Plug in the power supply (this product is powered by AC 220V), touch the power button on the 
monitor for about 6 seconds, and after you hear the "Didi Didi" four beeps, the display is completed. 
2. Start the temperature measurement: When the device is turned on, or the device is in the standby state, you 
need to start the temperature measurement. You only need to use the hand or forehead to irradiate the 
temperature in the temperature measurement area. When you hear a "drop", the display turns on. The 
temperature measurement function has been started. 
3. Detection: Pedestrians enter the detection range and bring their foreheads close to the detection area 
(5-20CM). When they hear a "drop" from the device, the detection is completed and takes 1-2 seconds; the 
detection results will appear immediately On the display.4. Disinfection: This equipment is equipped with an automatic induction disinfection machine. When the 
pedestrian detection result is normal body temperature, the pedestrian puts his hand under the automatic 
induction disinfection machine, the hands from bottom to top, the automatic induction disinfection machine 
drips the disinfection solution, and the pedestrian You can leave after rubbing your hands. 
5. Standby: When the device does not perform temperature measurement for more than 60 seconds, the 
display of the device will go out, and the device's temperature measurement function will enter the standby 
state. 

Matters needing attention 
1. Do not measure for a while or immediately after breastfeeding 
2. Do not use in a temperature-less environment 
3. Do not drink, eat or exercise before or during the measurement 
4. If there is dust, hair or sweat on the temperature measuring probe, please wipe it with alcohol or 
disinfectant immediately 
5. Don't leave the temperature measurement area when you don't hear the "drop" sound at the end of the 
measurement 
6. Please try to measure in the specified measurement area