PVC PE Cable Wire Extrusion Machine
Specification and configuration for ø50mm core wire insulation extrusion machine
1). Application:
Used in high-speed insulation extrusion for PVC/SR-PVC/HDPE/PP/PU wire and cable.
2). Main specification:
A. Concentricity: 93-97% OD tolerance: Solid +/-0.005
B. Wire specification: AWG30-AWG24 (0.1mm-1mm)
C. Body temperature will be controlled within ±1ºC, working speed: 400-600m/min (depends on wire diameter)
D. Extrusion material: HDPE, Foam-PE, PP, PU, PVC, SR-PVC, etc.
E. Machine color: As required.
F. Operation direction: Right hand or Left hand (As required)
3). Main parts:
(A) ø300-500mm single-head active pay off
(B) ø50mm main extruder
(C) Electrical control cabinet
(D) U7 domestic extrusion crosshead
(E) 1.8M movable cooling water tank
(F) Laser diameter tester (Eectrl)
(G) 9M single layer cooling water tank
(H) 9M high precision horizontal accumulator
(I) High frequency spark tester
(J) ø250 dual capstan + ø500 double-bobbin take-up machine
4). Brand of main accessories:
A. Motor: Siemens
B. Frequency converter: Yaskawa
C. Bearing: NSK (Japan brand)
D. Electrical component: Siemens or Omron
E. PLC controller: Siemens
5). Spare parts
| Name | Unit | Qty |
| Tool box | Piece | 1 |
| Operation instruction and circuit diagram | Piece | 1 |
| Inside hexagonal spanner | Piece | 1 |
| Round nut spanner+type and type screw | Piece | 1 for each |
| Scissors, pointed forceps | Piece | 1 for each |