main feature

Oiling system: The oiling uses the oiling pipe to rotate while applying oil to the grinding needle. The oiling rotation can reach two turns to ensure the uniformity of oiling. The oil dripping adopts the control method that combines the micro-adjusting needle valve and the main valve to ensure the dripping
Oiling system: Use the oil pipe to rotate the oil to grind the oil, which can achieve two rotations to ensure the uniformity of the oil. The oil applicator adopts a quick installation system, which greatly saves the time of changing the oil applicator. The combination of the drip control valve and the fine-tuning valve ensures the control ability of dripping. The lubricator adopts a fast loading system, which greatly saves the time of replacing the lubricator.
 
Glue dipping system: Realize the mold strip tipping over, six strips dipping glue, the mold strip is inclined and shaped, and sent to the track. The new widened, multi-layer thermal insulation glue tank ensures that the glue dipping system adopts a new generation of servo motor, and the disc lifting and disc rotation are controlled separately to realize the multi-stage and multi-speed control of the glue dipping to meet the needs of hard hollow plant capsule production. And can also adjust multi-stage and multi-speed according to the actual needs of production.
 
Dipping system: six molds are turned over, dipped, shaped, and transferred to the track. The expansion of the new product and the multi-layer insulation rubber tank ensure a stable liquid level and a constant liquid temperature. The gluing system adopts a new generation of servo motors, and the disc lifting and disc rotation are separately controlled. The dipping can realize multi-stage speed control to meet the needs of hard hollow vegetable capsule production, and the multi-stage speed production can be adjusted according to actual needs.
 
Drying system: The dedicated air duct can be heated by water, electric heating and water and electricity. The heating control is controlled by a professional multi-channel temperature controller to realize the temperature of the air duct within ±0.5ºC.
Drying system: The dedicated air duct can heat water, electric heating and hydroelectric heating. The heating control is controlled by a professional multi-channel temperature controller to realize the air duct temperature control within ± 0.5
 
Within. Composed of front and rear damping plates, roller table, up and down offset and tail platform, this machine is the first in the same industry in China to use electric cylinder drive, it is convenient to realize the precise motion control of thrust, speed and position, greatly eliminating noise and reducing
 
Transmission system: mold spreading system through damping plate, idler, dragging up and down and trailing back and forth: overall system stability, controllability, and capsule molding pass rate, easier to achieve humanized control, high efficiency, energy saving and environmental protection. Platform composition. This machine is the first in the domestic industry to use electric cylinder drive, which can easily realize the precise motion control of thrust, speed and position.

Greatly eliminate noise and reduce oil pollution. It improves the stability, control ability, and qualified rate of the capsule forming of the entire system, making it easier to realize manpower-saving control and high-efficiency energy and environmental protection.
 
Propulsion system: a propulsion system composed of guide rail, transition section, center box, push claw and conveyor belt, complete
 
Propulsion system: It is composed of guiding device, transition section, center box, thrust claw and transmission belt. It is characterized in that the propulsion device adopts imported linear module and servo motor, which can achieve propulsion accuracy and repeatability. The propulsion system completes the unpopularity of the mold, moves forward, and advances the imported linear module and servo motor of the mechanism to advance accuracy and repeatability.
 
Automatic nesting system: A series of actions of demolding, fixing the length, cutting and nesting of the formed capsule. The fixed length can be guaranteed to be within ±0.1mm, and the nesting is pre-locked. Since the automatic sleeve machine is a purely mechanical transmission, and according to the lubrication requirements, working conditions and environmental conditions of the various mechanisms and friction pairs in the overall design of the plant hollow capsule production equipment, the technical design of the centralized lubrication system is determined, and the reasonable The lubrication system includes the determination of the form of the lubrication system, the calculation and subdivision of the performance, specifications, quantity, and the size and layout of the various waveguides in the system.
Design principle: Use the main shaft power to increase the chain drive to drive the gear pump. When the gear rotates, the layout track is used. The quantitative distributor realizes the quantitative lubrication of the far and near ends. There is no need to increase the main drive and effectively use the space. The gear pump can be separated from the machine to be lubricated, and lubricate the friction pairs one by one, completely covering every lubrication point.
 
Automatic bonding system: demoulding the formed mold, fixing the length, cutting and setting a series of actions, the length can be guaranteed within ±0.1mm, and preset locking. Because the automatic machine is a purely mechanical transmission device, and according to the overall design mechanism and lubrication friction requirements, working conditions and environmental conditions of the automation components of the hollow capsule production equipment produced by the factory, the centralized lubrication system is designed and a reasonable lubrication system is determined. The whole set includes The form definition of the lubrication system, calculation and selection of the performance, specifications, quantity, size and layout of each lubrication system and original equipment in the system.
Design principle: The gear pump is driven by increasing the main shaft power of the chain drive, and the gear rotates the pipeline layout and the quantitative distributor, so as to realize the quantitative lubrication of the far and near ends, without the need for an additional main drive, and effective use of space. The gear pump can be separated from the lubricating machine, the friction pair is one-to-one lubricated, and the lubrication point is completely covered.
 
Motion control system: humanization of operation and centralized control. Motion controller, server and servo motor, speed, temperature and other related actions are all controlled by centralized control, parameterized design, all parameters can be operated on the touch screen, using modern advanced RETX bus network control and network technology, for one or Multiple production lines realize remote control and maintenance. Safe and reliable low voltage control. The control voltage of this production line is DC 24V.
 
Motion control system: humanized operation, centralized control. The production line uses advanced imported professional motion controllers, servers and servo motors, speed, temperature and other related actions are centralized control, parameterized design, all parameters can be operated on the touch screen, and modern and advanced ReTx bus network control and network Technology, and one or more production lines to achieve

Remote control and maintenance. Safe and reliable low voltage control. The control voltage of the production line is DC 24V.