Co2 laser engraver laser machine for wood, marble, glass
Features:This laser machine can engrave and cut, thus it is applicable for various industries. It belongs to an economical laser equipment. The whole laser machine has stable performance and easy-operation system, coming with professional software. So it can realize high efficiency and good quality processing effect for various industries.Workable Materials:
Wood, Paper, Leather, Cloths, Organic glass, Plexiglass Resin, Acrylic, Woolens, Plastic, Rubber. Ceramic tile, Crystal,Bowler, Bamboo, Marble, Granite, Tile, Delrin, Doublecolor board, Glass, Painted metals, Anodized aluminum, EVA, etc.
Extra Features:1) Materials can extend through the front and rear doors to allow for a larger work product.
2) Following Work light to help see products during laser processing.
3) Red-DOT pointer to help you see the expected laser beam position.
4) AutoFocus touch sensor to easily set the right height for best engraving and cutting.
5) Parts tray for removing small parts or scrap from under the workbed.
6) Fully enclosed laser case yields a class I (user friendly) laser product.Specifications: Model | FLC9060 |
Laser-type | 10.6um CO2 glass laser tube w/ water-cooling |
Laser power | 60W/90W/100W/130W/150w/180w |
Working area | 900 x600mm (35.4 x 23.6 inches) |
Max Engraving speed: | 0-64, 000mm/min |
Max cutting speed | 0-30, 000mm/min |
Laser output control | 1-100% software setting |
Location precision | Less than 0.01mm |
Highest scanning precision | 2500DPI |
Operating temperature | 0 - 45 |
Operating humidity | 5- 95% non-condensing |
Minimum shaping character | English 1.0 x 1.0mm |
Graphic format supported | HPGL, JPEG, BMP, PLT, DST, DXF, and AI ... |
Driving system | Stepper(Optional: Servo) |
Cooling mode | Water-cooling and protection system |
Auxiliary equipments | Exhaust-fans, air-exhaust pipe, air pump, water pump |
Controller | DSP |
Compatible Software | CorelDraw, AutoCAD, Photoshop, TAJIMA |
Slope Engraving | Can be easily designed within the "Grade Engrave" function. |
Color separation | Uses color property to set function, speed, and laser power |
| Engrave/Etch/Mark | Cut |
Acrylic | √ | √ |
Delrin | √ | √ |
Cloth | √ | √ |
Leather | √ | √ |
Wood | √ | √ |
Mat Board | √ | √ |
Melamine | √ | √ |
Paper | √ | √ |
Mylar | √ | √ |
Pressboard | √ | √ |
Rubber | √ | √ |
Wood Veneer | √ | √ |
Fiberglass | √ | √ |
Plastic | √ | √ |
Cork | √ | √ |
Corian | √ | √ |
Twill | √ | √ |
Anodized Aluminum | √ | |
Painted Metals | √ | |
Tile | √ | |
Glass | √ | |
Coated Metals | √ | |
Ceramics | √ | |
Marble | √ | |
Stainless Steel | * | |
Brass | * | |
Titanium | * | |
Bare Metal | * | |