Pud Adhesive (Flexibond 5300) for Sky Roof Door Trim and Sun Visor with ISO/CNAS/SGS
China Pud Adhesive (Flexibond 5300) for Sky Roof Door Trim and Sun Visor with ISO/CNAS/SGS, Find details about China Water Based Glue, Polyurethane Adhesive from Pud Adhesive (Flexibond 5300) for Sky Roof Door Trim and Sun Visor with ISO/CNAS/SGS
Basic Info.
Model NO.
Flexibond 5300
Main Agent Composition
Natural Polymer
Characteristic
Weatherability
Composition
Organic Material
Color
White
Application Field
Vehicle Roof, Door Trim, Luggage Rack
Application Field2
Pillar Interior
Bonding Substance
ABS, PC Board, Fiber Sheet, SMC, Wood Composite
Bonding Substance2
PVC Sheets,Carpets,Leather , Double-Sided Fabrics
Advantages
Wide Application Range
Feature
Eco-Friendly and Safety
Appearance
Milky White Liquid
Shelf Life
6months
Density
1.01-1.07 g/cm3 (23 ºC)
Viscosity
4500±500 MPa.S (23 ºC)
Solid Content
50±1%
Support
OEM and ODM
Certificates
ISO9001/ISO14001/IATF16949/SGS
Transportation
by Sea/Air/Express/Train/Land
Trademark
Flexibond
Transport Package
Pallet/Pail
Specification
20kg/pail
Origin
China
HS Code
3506919090
Model NO.
Flexibond 5300
Main Agent Composition
Natural Polymer
Characteristic
Weatherability
Composition
Organic Material
Color
White
Application Field
Vehicle Roof, Door Trim, Luggage Rack
Application Field2
Pillar Interior
Bonding Substance
ABS, PC Board, Fiber Sheet, SMC, Wood Composite
Bonding Substance2
PVC Sheets,Carpets,Leather , Double-Sided Fabrics
Advantages
Wide Application Range
Feature
Eco-Friendly and Safety
Appearance
Milky White Liquid
Shelf Life
6months
Density
1.01-1.07 g/cm3 (23 ºC)
Viscosity
4500±500 MPa.S (23 ºC)
Solid Content
50±1%
Support
OEM and ODM
Certificates
ISO9001/ISO14001/IATF16949/SGS
Transportation
by Sea/Air/Express/Train/Land
Trademark
Flexibond
Transport Package
Pallet/Pail
Specification
20kg/pail
Origin
China
HS Code
3506919090
Product Desciption
Description:
Flexibond 5300 is a two-component water based polyurethane adhesive, mainly used for bonding PVC sheets,carpets, fabrics, double-sided fabrics, leather and so on to ABS, ABS/PC board, fiber sheet, SMC, wood composite and other substrates for molding, such as vehicle roof, door trim, luggage rack, pillar interior, etc. This adhesive is very eco-friendly, can be activated at a lower temperature, and has excellent bonding properties.
Technical Data Sheet of Flexibond 5300:
Storage and Shelf Life:
Partners:
Company Profile:
Production Base:
Automatic Production Lines and Quality Assurance:
Global Sales Network:
Certificates:
COMENS,A FULL RANGE OF SOLUTIONS
FOR MULTIPLE INDUSTRIES
Flexibond 5300 is a two-component water based polyurethane adhesive, mainly used for bonding PVC sheets,carpets, fabrics, double-sided fabrics, leather and so on to ABS, ABS/PC board, fiber sheet, SMC, wood composite and other substrates for molding, such as vehicle roof, door trim, luggage rack, pillar interior, etc. This adhesive is very eco-friendly, can be activated at a lower temperature, and has excellent bonding properties.
Technical Data Sheet of Flexibond 5300:
| Color | Milky white |
| Density | 1.01-1.07 g/cm3 (23 ºC) |
| Viscosity | 4500±500 mPa.S (23 ºC) |
| Solid content | 50±1% |
1.The mixed product contains isocyanate, please read MSDS carefully before use.
2.Flexibond 5300 is a water-based product, must store in the original packaging within the range of 5-35ºC. If the temperature is too low, it will agglomerate; if the temperature is too high, it will cause degradation and weak the adhesion.
3.Under the above storage conditions, the shelf life of the main glue is 6 months. Because high temperature or transportation bumps may cause rubber to fall into the material on the drum lid or drum wall, the main glue should be filtered before use.
If the temperature is lower than 5ºC or higher than 35ºC, should ship the main glue with air conditioning or thermal insulation system. Handling and unloading should not stay in outside for too long to prevent agglomeration.
Specification:
20 kg/pail
Note:
2.Flexibond 5300 is a water-based product, must store in the original packaging within the range of 5-35ºC. If the temperature is too low, it will agglomerate; if the temperature is too high, it will cause degradation and weak the adhesion.
3.Under the above storage conditions, the shelf life of the main glue is 6 months. Because high temperature or transportation bumps may cause rubber to fall into the material on the drum lid or drum wall, the main glue should be filtered before use.
If the temperature is lower than 5ºC or higher than 35ºC, should ship the main glue with air conditioning or thermal insulation system. Handling and unloading should not stay in outside for too long to prevent agglomeration.
Specification:
20 kg/pail
Note:
1.Check the substrate before gluing, make sure free of oil stains, water stains, dust, volatile substances, etc.; check the spray gun, make sure nozzle is clean so that to spray glue smooth;
2.Filter the main glue first, then mix with the hardener with ratio 100:5, the speed of the dispersing machine is about 500r/min, and after stirring for 5- 10min, a uniform blue glue solution is formed.
3.Use a pneumatic spray gun to spray glue evenly on the surface of the substrate, the amount of glue is about 80-140g/m2.
4.Put the glued substrate in a 60°C oven or drying tunnel for 5-10 minutes, then coating while hot.
5.Put the fitting sample into a constant temperature room (23 ± 2ºC, 50%RH) for 72 hours, and it can be used or tested.
6.After the gluing is finished, use the running tap water to clean the spray gun and the storage tank in time, not overnight.
7.The glue that has been mixed with the hardener should be used up within 4-6h. The main glue without hardener can be sealed with a barrel lid and placed in a constant temperature warehouse at 5-35°C, which can be used the next day.
If it is PP/PE and other difficult-to-stick substrates, it must be treated with flame or plasma before gluing.
2.Filter the main glue first, then mix with the hardener with ratio 100:5, the speed of the dispersing machine is about 500r/min, and after stirring for 5- 10min, a uniform blue glue solution is formed.
3.Use a pneumatic spray gun to spray glue evenly on the surface of the substrate, the amount of glue is about 80-140g/m2.
4.Put the glued substrate in a 60°C oven or drying tunnel for 5-10 minutes, then coating while hot.
5.Put the fitting sample into a constant temperature room (23 ± 2ºC, 50%RH) for 72 hours, and it can be used or tested.
6.After the gluing is finished, use the running tap water to clean the spray gun and the storage tank in time, not overnight.
7.The glue that has been mixed with the hardener should be used up within 4-6h. The main glue without hardener can be sealed with a barrel lid and placed in a constant temperature warehouse at 5-35°C, which can be used the next day.
If it is PP/PE and other difficult-to-stick substrates, it must be treated with flame or plasma before gluing.
Partners:
Company Profile:
Production Base:
Automatic Production Lines and Quality Assurance:
Global Sales Network:
Certificates:
COMENS,A FULL RANGE OF SOLUTIONS
FOR MULTIPLE INDUSTRIES
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine