Products

Two Component Spray Polyurea for Waterproof Coating

China Two Component Spray Polyurea for Waterproof Coating, Find details about China Waterproof, Spray Polyurea Elastomer Coating from Two Component Spray Polyurea for Waterproof Coating

Model NO.
TH-801
Method
Spray
Level
Finish Coat
Drying Method
Chemical Merchanism Drying
Certification
ISO14001, ISO9001
Substrate
No Limit
Components
Film Forming Matter
Formation Mechanism
Conversion Type
Trademark
0
Transport Package
Pallet
Specification
Component A: 220KG/bucket Component B: 210KG/bucke
Origin
China
HS Code
3911900003
Model NO.
TH-801
Method
Spray
Level
Finish Coat
Drying Method
Chemical Merchanism Drying
Certification
ISO14001, ISO9001
Substrate
No Limit
Components
Film Forming Matter
Formation Mechanism
Conversion Type
Trademark
0
Transport Package
Pallet
Specification
Component A: 220KG/bucket Component B: 210KG/bucke
Origin
China
HS Code
3911900003
Spray Polyurea Elastomer Coating SPUA for
Anticorrosion and waterproof protection of construction, chemicals, transportation,
metallurgy,electric power, aerospace, marine, shipbuilding and other fields.

Company Information
Two Component Spray Polyurea for Waterproof Coating
Two component spray polyurea for Waterproof  coating
 
TH-801 Waterproof
ItemTechnical Index
GB/T 23446-2009 oneTH-801
Solid content (%)≥9699
Gel time (S)≤4515
Surface drying time (S)≤12035
Tensile strength (Mpa)≥1015
Elongation at break(%)≥300380
Tear strength (N/mm)≥4066
Low temperature bending property (ºC)≤-35-40
Water-impermeable (0.4Mpa, 2H)Water-impermeableWater-impermeable
Heating expansion rate Elongation (%)Elongation (%)≤1.00.5
Shrinkage (%)≤1.00.5
Bonding strength (MPa)≥2.02.5
Water absorption (%)≤ 52.5
Aging at constant extensionHeating agingNo cracks and deformationNo cracks and deformation
Artificial climate agingNo cracks and deformationNo cracks and deformation
Heat treatmenttensile strength retention rate (%)80~15096
Elongation at break (%)≥250350
Low temperature bending property (ºC)≤-30-32
Alkali treatmentTensile strength retention rate (%)80~150100
Elongation at break (%)≥250330
Low temperature bending property (ºC)≤-30-33
Acid treatmentTensile strength retention rate (%)80~15095
Elongation at break (%)≥250343
Low temperature bending property (ºC)≤-30-33
Salt treatmentTensile strength retention rate (%)80~15095
Elongation at break (%)≥250358
Low temperature bending property (ºC)≤-30-32
Artificial weatheringTensile strength retention rate (%)80~15093
Elongation at break (%)≥250330
Low temperature bending property (ºC)≤-30≤-32
Hardness (Shore A)≥7090±5
Wear resistance (750g/500r)/mg≤4020
Impact resistance (kg/m)≥0.61.0 
ColorCustomized
Integrity statement:  TH-801 series products conform to the national standard GB/T 23446-2009 Type I; all the listed data are tested and obtained in related laboratories in accordance with the corresponding standards. The relevant data during the test will be determined by the test environment and method. The results are slightly different. With the continuous improvement of products, product performance parameters may change, please keep in touch.
 

Construction and Project case
Two Component Spray Polyurea for Waterproof Coating
The versatility of spray polyurea products 
Product shelf life and storage:
1. The storage temperature should be 5-40ºC
2. Under normal storage and transportation conditions, the storage period is not less than 6 months from the date of production
3. Store in a cool, ventilated environment, avoid direct sunlight, prohibit close to fire sources, and prevent collisions
4. Packaging: component A: 220KG/drum, component B: 210KG/drum
 
Precautions:
1. During construction, the temperature of the substrate must be 3°C higher than the dew point temperature;
2. Before the product is used, component B should be fully stirred;
3. The system has a 100% solid content, and it is strictly forbidden to add any diluent;
4. During construction in a confined space, good ventilation must be maintained;
5. When using this product, you must wear work clothes, goggles, gas masks, gloves and other protective equipment.
 
Product application guidance:
Recommended spraying machine: Graco H-XP3 polyurea spraying equipment spray gun; air or mechanical self-cleaning polyurea spray gun
Static pressure 2300-2500psi; dynamic pressure 2000-2200psi
Recommended dry film thickness: 1000-3000μm
Recoating interval≤6h
 
Proportion: Component A: Component B =1:1


Packaging  and Shipping
Two Component Spray Polyurea for Waterproof Coating
FAQ
1. What is the price for polyurea materials?
The price is decided by Quantity .
 
2. How about samples?
Sample Lead Time: 5 working days
Sample Fee:
1).It's free for all for a regular customer
2).For new customers, we will charge first, it is fully refundable when order confirmed.
 
3. How many days for shipping?
Shipping Methods and Lead Time:
By Express: 3-5 working days to your door (DHL, UPS, TNT, FedEx...)
By Air: 5-8 working days to your airport
By Sea: Pls advise your port of destination, the exact days will be confirmed by our forwarders,  and the following lead time is for your reference. Europe and America (25 - 35 days), Asia (3-7 days), Australia ( 16-23 days)
 
4. What is the Terms of Payment?
Credit Card,T/T, L/C, Western Union;  30% T/T in advance, 70% before delivery.

5. Packaging & Shipping ?
Pallet, wooden case or with outer carton, or as customers' specific requirements.

6. Why choose your company?
We are focusing on all aspects of anticorrosive waterproof, insulation fields. US technology and made in China, high quality and nice prices.
We strictly implement the rules according to the quality standard in every aspects from the purchase of raw material to the production process  and outgoing of products.
Great service and Superior quality is provided all the time…
Packaging & Shipping Packing: Carton, wooden box and pallet, or as customers' requirements.
Shipping: By Express (DHL /UPS /TNT /FedEx /EMS), By Air, By Sea
 

Two Component Spray Polyurea for Waterproof Coating

 

You Might Also Like