Development on Press Thermal Processless CTP Plate

China Development on Press Thermal Processless CTP Plate, Find details about China Printing Plate, CTP Printing Plate from Development on Press Thermal Processless CTP Plate

Model NO.
ECOO-G
Thickness
0.15mm / 0.30mm
Photosensitive Wave Length
830nm
Platesetter
Various Dominant Thermal Platesetters in Market
Coating Color
Grey
Low-Energy Imaging
130-150 Mj/ Square Centimeter
Recommended Screen Method
1-99% @200 Lpi Am or 20um FM or Mixture
Trademark
EcooGraphix
Transport Package
Standard Exporting Wooden Pallet
Specification
Plate Type thermal-negative type
Origin
China
HS Code
370130
Model NO.
ECOO-G
Thickness
0.15mm / 0.30mm
Photosensitive Wave Length
830nm
Platesetter
Various Dominant Thermal Platesetters in Market
Coating Color
Grey
Low-Energy Imaging
130-150 Mj/ Square Centimeter
Recommended Screen Method
1-99% @200 Lpi Am or 20um FM or Mixture
Trademark
EcooGraphix
Transport Package
Standard Exporting Wooden Pallet
Specification
Plate Type thermal-negative type
Origin
China
HS Code
370130

Development On Press Thermal Processless CTP Plate




Development on Press Thermal Processless CTP Plate

Model: ECOO-G




 
Application

 


EcooGraphix Ecoo-G is a new, environmentally friendly, Development On Press CTP plate. It can be run directly on a printing press after imaging, without a need for chemical processing.



 
Specification


 
ModelECOO-G
Plate Typethermal-negative type
ApplicationHigh grade commercial and newspaper printing
SubstrateElectrolyte graining and Anodized AL substrate
Thickness0.15mm / 0.30mm
Maximum short grain widthMaximum width 1280 mm
Spectrum scope800-850 nm
Photosensitive wave length830 nm
PlatesetterVarious dominant thermal platesetters in the market
Coating colorGrey
Low-energy imaging130-150 mj/ cm²
The period of latent image stabilization7 days
Recommended screen method1-99% @200 LPI AM or 20μm FM or mixture
The paper number of start-up<50 sheets
Safety light4 hours under yellow light; 1 hour under fluorescent lamp;
Direct exposure under natural light is safe but not recommended.
ProcessingWithout processing, directly on press
Run Length100,000 impressions
Actual run length depends on printing conditions
Shelf life12 months under recommended condition
TransportationPacked in seal and stored by means of prevention
from light, moisture, overheat and high humidity
StorageRecommended condition: 18ºC-24ºC, 40%-50% RH.
 
Development on Press Thermal Processless CTP Plate
 
Model ECOO-G

Plate Type thermal-negative type

Application High grade commercial and newspaper printing

Substrate Electrolyte graining and Anodized AL substrate

Thickness 0.15mm / 0.30mm

Maximum short grain width Maximum width 1280 mm

Spectrum scope 800-850 nm

Photosensitive wave length 830 nm

Platesetter Various dominant thermal platesetters in the market

Coating color Grey

Low-energy imaging 130-150 mj/ cm²

The period of latent image stabilization ≤7 days

Recommended screen method 1-99% @200 LPI AM or 20μm FM or mixture

The paper number of start-up <50 sheets

Safety light 4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended.

Processing Without processing, directly on press

Run Length 100,000 impressions Actual run length depends on printing conditions

Shelf life 12 months under recommended condition

Transportation Packed in seal and stored by means of prevention from light, moisture, overheat and high humidity

Storage Recommended condition: 18ºC-24ºC, 40%-50% RH.

 


Applied parameters in Imaging device
 
    CTP model
Data
Kodak
trendsetters
LOTTEM 400(TH1.7)MAGNUS 400Screen 8600S
Laser power15-17W300-320mw19.5-21.5W80-90 %
Drum speed250-300rpm850-900rpm400-450rpm800-900rpm
ResolutionCustomizedCustomizedCustomizedCustomized
Parameter that need set upFocus/ ZoomFocus/ ZoomFocus/ ZoomFocus/ Zoom

*Note: Higher exposure energy will make the image contrast more clear, and benefit to the plate run length; while over high/low exposure energy will affect the image quality negatively.
 



 
Characteristic




ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution; while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.




 
Customer's Feedback




Development on Press Thermal Processless CTP Plate


 
Producing and Packing


From producing to delivery, we make every details very carefully to guarantee the good product quality and service to customers.

Development on Press Thermal Processless CTP PlateDevelopment on Press Thermal Processless CTP PlateDevelopment on Press Thermal Processless CTP PlateDevelopment on Press Thermal Processless CTP PlateDevelopment on Press Thermal Processless CTP PlateDevelopment on Press Thermal Processless CTP PlateDevelopment on Press Thermal Processless CTP Plate


 
Certificates



Development on Press Thermal Processless CTP PlateDevelopment on Press Thermal Processless CTP Plate


 
FAQ
 




Q1: Can I get the sample?
A: We are very glad to provide some sample for you to test. We usually provide 5-15 pieces plates for free, but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.

Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.

Q3: How long can the sample be ready?
 A: It usually takes about 3 days to prepare the sample.

Q4: Can I visit your factory?
A: You are warmly welcomed to visit our factory! Our company is in Hangzhou city, which is about 1.5 hour by train from Shanghai.

Q5: How many Square Meters CTP plates can feed one 20' container?
A: About 20000-25000SQM.

Q6: Can I take my own brand and label on the packing?
A: Yes, we can provide the OEM with the customer's brand and label.