Products

Addition Cure Silicone for Making Sculptures Molds

China Addition Cure Silicone for Making Sculptures Molds, Find details about China Silicone, Silicon from Addition Cure Silicone for Making Sculptures Molds

Model NO.
801-25, 801-15, 902-20, 902-30
Trademark
XD silicone
Specification
10KG, 20KG, 40KG, 50KG
Origin
Beijing
HS Code
3910000000
Model NO.
801-25, 801-15, 902-20, 902-30
Trademark
XD silicone
Specification
10KG, 20KG, 40KG, 50KG
Origin
Beijing
HS Code
3910000000
Liquid silicone for mold making is High temperature resistance, acid and alkali-resistance, aging resistance,Low shrinkage, high hardness and no-deformation,High tensile and tear strength, easy to de-molding.

This silicone is used for sculpture, cement / gypsum product, architectural and furniture elements,resin crafts, casting wax, art objects
 
Model801-25801-15902-20902-30
Mixing ratio (A:B)100:2~3100:2~31:11:1
Hardness (Shore A)≥25282030
Tear-strength (kgf/c m²)≥21222122
Viscosity ( mixed 25°C mpa.S)    25000±200025000±2000  25000±200025000±2000
Shrinkagerate (%)≤0.20.20.10.1
Elongation(%)450420480400
How to use:
1.A and B must be mixed evenly into a clean plastic or metal container, The bottom and walls of the container must be scraped well to ensure that the silicone is mixed with the curing agent.

2.The pre-operation time of the mixed is 30-40 minutes at room temperature, and the product prototype is poured by vacuum defrosting.The product can be cured completely at room temperature of 3-4 hours and heated at 80-120ºC for 30 minutes.

3.At  25ºC, A/B is fully mixed and stored safely for 30-40 minutes.The higher the temperature, the shorter the storage time.

Package: 10KG, 20KG, 25KG, 200KG or according to customer requirements

Pls email us if any question, and we can do as cusotmer need specification !
Addition Cure Silicone for Making Sculptures Molds



 

You Might Also Like