N10276 /C276 Alloy Straight Tee, Three-Way Pipe, Inox Joint,

China N10276/C276 Alloy Straight Tee, Three-Way Pipe, Inox Joint,, Find details about China Reducing Tee, Pipe Fitting from N10276/C276 Alloy Straight Tee, Three-Way Pipe, Inox Joint,

Model NO.
N10276
Surface
Customized
Market
Turkey, Viet Nam, Singapore, Malaysia and So on
Certificate
ISO9001:2008
MOQ
100PCS
Coating
Customized
Material
Stainless Steel
Process
Forge
Trademark
Bozhong
Transport Package
Woven Bags and Pallets
Specification
inches and SCH
Origin
Shanghai, China
HS Code
7507200000
Model NO.
N10276
Surface
Customized
Market
Turkey, Viet Nam, Singapore, Malaysia and So on
Certificate
ISO9001:2008
MOQ
100PCS
Coating
Customized
Material
Stainless Steel
Process
Forge
Trademark
Bozhong
Transport Package
Woven Bags and Pallets
Specification
inches and SCH
Origin
Shanghai, China
HS Code
7507200000
N10276/C276 Alloy Straight Tee, Three-Way Pipe, Inox Joint,
N10276/C276 Alloy Straight Tee, Three-Way Pipe, Inox Joint,

Introduction
Inconel is a group of austenitic nickel-chromium-based super alloys produced by Special Metals Corporation. Super alloys are referred to as high performance alloys that function well in environments with elevated temperatures.
Super alloy INCONEL C-276 has high molybdenum content which provides the material with localized corrosion resistance like pitting. This alloy is generally known for corrosion resistance in a wide range of aggressive media. The low carbon content in this alloy helps to reduce carbide precipitation while performing welding.
The following section explains in detail about super alloy INCONEL C-276.

Chemical Composition
The chemical composition of INCONEL C-276 is outlined in the following table.
ElementContent (%)
Molybdenum, Mo15-17
Chromium, Cr14.5-16.5
Cobalt, Co2.5 max
Manganese, Mn1
Vanadium, V0.35 max
Silicon, Si0.08 max
Phosphorus, P0.04 max
Sulfur, S0.03 max
Carbon, C0.01 max
Nickel. Ni62.5-67.5
Physical Properties
The physical properties of INCONEL C-276 are tabulated below.
PropertiesMetricImperial
Density8.89 g/cm30.321 lb/in3
Melting point1325 °C2417 °F
Mechanical Properties
The following table shows mechanical properties of INCONEL C-276.
PropertiesMetricImperial
Tensile strength740.5 MPa107400 psi
Yield strength347 MPa50300 psi
Elastic modulus205 GPa29700 ksi
Elongation at break67%67%
Thermal Properties
The thermal properties of INCONEL C-276 are tabulated below.
PropertiesMetricImperial
Thermal conductivity (@23°C/73.4°F)9.80 W/m-K68.0 BTU in/hr.ft².°F

Fabrication and Heat treatment
Welding
Weldability of INCONEL alloy C-276 is rated as good. This material can be used as-welded for most applications.
Hot Working
Hot working of this alloy can be performed 870 and 1230°C (1600 and 2250°F). in case of performing heavy working, it has to be above 1090°C (2000°F).
Annealing
INCONEL alloy C-276 can be annealed at 1150-1175°C (2100-2150°F) and rapidly cooled by water quenching.

Applications
INCONEL C-276 is chiefly used in the following areas:
Chemical processing
Pollution control
Pulp and paper production
Industrial and municipal waste treatment
Recovery of sour natural gas.
Products made using INCONEL C-276 are as follows:
Air pollution control components such as ducts, stack-gas re-heaters, dampers, stack liners, scrubbers, fans and fan housings
Components required in chemical processing such as reaction vessels, heat exchangers, evaporators, and transfer piping.