Tsaplus Fluorescence Triple Staining Kit Fitc Cy3 If488 If555 If647
China Tsaplus Fluorescence Triple Staining Kit Fitc Cy3 If488 If555 If647, Find details about China Tsa Plus, Fluorescence Triple Staining from Tsaplus Fluorescence Triple Staining Kit Fitc Cy3 If488 If555 If647
Basic Info.
Model NO.
G1236-100T
Habit Appellation
Special Reagent
Application
Industry, Scientific Research
Property
Biochemical Reagent
Trademark
Servicebio
Specification
100T
Origin
China
Model NO.
G1236-100T
Habit Appellation
Special Reagent
Application
Industry, Scientific Research
Property
Biochemical Reagent
Trademark
Servicebio
Specification
100T
Origin
China
Product Desciption
TSAPLus Fluorescence Triple Staining Kit
Cat No. G1236-50T
Package Contents:
Product introduction:
This product TSAPLus fluorescent triple staining kit is suitable for immunofluorescence multiple staining of paraffin sections, especially for multiple fluorescent immunolabeling of primary antibodies from the same source, and also for multiple fluorescent immunolabeling of antibodies from different sources. The main principle is based on tyramide signal amplification (TSA, Tyramide signal amplification), hereinafter referred to as TSA technology. The main principle of TSA technology is to use the peroxidase reaction of tyramide (that is, the fluorescently labeled tyramide salt forms a covalent bond binding site under HRP catalyzed by H2O2) to produce a large number of enzymatic reactions. This product can interact with the surrounding Protein residues (including tryptophan, histidine, and tyrosine residues) combine to form a large amount of fluorescein deposition at the antigen-antibody binding site to achieve signal amplification. This kit uses fluorescent dyes 488/555/647 to label tyramine. The resulting fluorescent tyramine has strong fluorescence and stable signal, which can be used for multiple repeated immunolabeling to achieve multiple fluorescent staining.
The fluorescence spectrum data of the relevant fluorescent dyes of the TSA series fluorescent staining kits are as follows:
Storage conditions:
Ice packs transportation, store at -20°C, valid period is 12 months.
Composition
Preparation before experiment:
1. Prepare 0.01 mol/L PBS buffer (pH7.0-7.4, recommended G4202 or G0002), 3% H2O2 and 0.3% H2O2;
2. Prepare primary antibody and corresponding HRP-labeled secondary antibody, antigen retrieval solution (choose the appropriate antigen retrieval solution according to the type of antibody and tissue);
Note: After the fluorescent Tyramide is melted, centrifuge it for a short time, and then take it after mixing with clean pipette tips. TSA staining working solution is recommended to be prepared for immediate use. It should be stored at 4°C and protected from light, and it is effective within 24 hours.
Steps
Taking tissue slides as an example, the water in the following experimental steps is pure water.
1. Deparaffinize tissue sections to water;
3. Wash 3 times with PBS, 5 min each time, use an Pap Pen to circle and mark the tissue;
4. Add 100 μL tissue autofluorescence quencher A solution dropwise to the tissue, incubate at room temperature for 30 min, and wash for 5 min;
5. Inactivate endogenous peroxidase: Add 3% H2O2 to the section to cover the tissue, and incubate in the dark at room temperature for 25 minutes, to block endogenous peroxidase to reduce non-specific background staining. Wash 3 times with 1×PBS, 5 min each time;
7. Incubate the primary antibody: Dilute the primary antibody to an appropriate concentration with 1×PBS or blocking solution (G2010 is recommended). Gently shake off the blocking solution on the section, add the diluted primary antibody dropwise to cover the tissue, and place the section flat in a humid chamber box with water and incubate overnight at 4°C. Wash 3 times with 1×PBS, 5 min each time;
8. Incubate the HRP-labeled secondary antibody: Dilute the secondary antibody to an appropriate concentration with 1×PBS or blocking solution (G2010 is recommended), add the secondary antibody dropwise to the tissue, and incubate at room temperature for 50 min. Wash 3 times with 1×PBS, 5 min each time;
10. Microwave treatment: The tissue section is placed in a repair box filled with antigen retrieval solution (choose the appropriate antigen retrieval solution according to the tissue type and antibody) for microwave heating treatment to remove the bound primary and secondary antibodies. In this step, it is necessary to prevent dry flakes caused by excessive liquid evaporation.
11. Repeat step 7 to incubate the second primary antibody: Dilute the second antibody (primary antibody) to be tested with PBS (or other antibody diluent) to an appropriate concentration. Gently shake off the liquid on the section, add the diluted antibody dropwise to cover the tissue, and place the section flat in a humidified box with water and incubate overnight at 4°C. Wash with PBS 3 times, 5 min each time;
12. Repeat step 8 to incubate the corresponding HRP secondary antibody: dilute the secondary antibody to an appropriate concentration with PBS (or other antibody diluent), add the secondary antibody dropwise to the tissue, and incubate at room temperature for 50 min. Wash with PBS 3 times, 5 min each time;
14. Microwave treatment: The tissue section is placed in a repair box filled with antigen retrieval solution (choose the appropriate antigen retrieval solution according to the tissue type and antibody) for microwave heating treatment to remove the bound primary and secondary antibodies. In this step, it is necessary to prevent dry flakes caused by excessive liquid evaporation.
15. Repeat step 7 to incubate the second primary antibody: Dilute the second antibody (primary antibody) to be tested with PBS (or other antibody diluent) to an appropriate concentration. Gently shake off the liquid on the section, add the diluted antibody dropwise to cover the tissue, and place the section flat in a humidified box with water and incubate overnight at 4°C. Wash with PBS 3 times, 5 min each time;
20.Mounting and microscopic examination: After the sections are dried slightly, add anti-fluorescence quencher to mount the slides. Observe and collect images with a fluorescence microscope or a confocal laser microscope. The slices can be stored for 15 days at 4°C in a light-proof slide box.
Precautions
1. Compared with fluorescent secondary antibody, TSA kit has higher sensitivity and stronger signal. Therefore, the concentration of the primary antibody needs to be reduced, generally by 5-10 times on the basis of the dilution ratio recommended in the antibody manual, to reduce the background fluorescence caused by non-specific binding. It is recommended to set the gradient concentration of the primary antibody to obtain the best effect.
2. If the background fluorescence is strong, it is recommended to add tissue autofluorescence quenching step.
3. The recommended dilution ratio of fluorescent Tyramide is 1:500, and the dilution ratio can be adjusted according to the experimental results (the recommended dilution ratio range is 1:200-1:1000).
4. For multiple fluorescent labeling, it is recommended to incubate the polyclonal antibody first, then incubate the monoclonal antibody; incubate the antibody corresponding to the low-abundance target protein first, and then incubate the antibody corresponding to the high-abundance target protein.
Cat No. G1236-50T
Package Contents:
| Product Item No. | Product Name | Specification |
| TSAPLus Fluorescence Triple Staining Kit | G1236-50T | 50T |
| G1236-100T | 100T |
Product introduction:
This product TSAPLus fluorescent triple staining kit is suitable for immunofluorescence multiple staining of paraffin sections, especially for multiple fluorescent immunolabeling of primary antibodies from the same source, and also for multiple fluorescent immunolabeling of antibodies from different sources. The main principle is based on tyramide signal amplification (TSA, Tyramide signal amplification), hereinafter referred to as TSA technology. The main principle of TSA technology is to use the peroxidase reaction of tyramide (that is, the fluorescently labeled tyramide salt forms a covalent bond binding site under HRP catalyzed by H2O2) to produce a large number of enzymatic reactions. This product can interact with the surrounding Protein residues (including tryptophan, histidine, and tyrosine residues) combine to form a large amount of fluorescein deposition at the antigen-antibody binding site to achieve signal amplification. This kit uses fluorescent dyes 488/555/647 to label tyramine. The resulting fluorescent tyramine has strong fluorescence and stable signal, which can be used for multiple repeated immunolabeling to achieve multiple fluorescent staining.
The fluorescence spectrum data of the relevant fluorescent dyes of the TSA series fluorescent staining kits are as follows:
| Fluorescent dye type | Ex/Em |
| FITC-Tyramide | 492/518 |
| CY3-Tyramide | 555/569 |
| iF488-Tyramide | 491/516 |
| iF555-Tyramide | 557/570 |
| iF647-Tyramide | 656/670 |
Storage conditions:
Ice packs transportation, store at -20°C, valid period is 12 months.
Composition
| Component Number | Component | G1236-50T | G1236-100T | Storage |
| G1236-1 | iF488-Tyramide | 25 μL | 2×25 μL | -20ºC |
| G1236-2 | iF555-Tyramide | 25 μL | 2×25 μL | -20ºC |
| G1236-3 | iF647-Tyramide | 25 μL | 2×25 μL | -20ºC |
| G1236-4 | Tyramide diluent | 50 mL | 50 mL | 4ºC |
| G1236-5 | DAPI (ready to use) | 10 mL | 20 mL | 4ºC |
| G1236-6 | Tissue autofluorescence quencher A solution | 10 mL | 20 mL | Room temperature |
| G1236-7 | Tissue autofluorescence quencher B solution | 10 mL | 20 mL | Room temperature |
| G1236-8 | Anti-Fluorescence quencher | 5 mL | 10 mL | -20ºC |
Preparation before experiment:
1. Prepare 0.01 mol/L PBS buffer (pH7.0-7.4, recommended G4202 or G0002), 3% H2O2 and 0.3% H2O2;
2. Prepare primary antibody and corresponding HRP-labeled secondary antibody, antigen retrieval solution (choose the appropriate antigen retrieval solution according to the type of antibody and tissue);
- According to the dosage, prepare TSA dyeing working solution according to the following ratio.
| TSA staining working solution | Reagent item | Volume |
TSA-488 staining solution | Tyramide diluent | 1 mL |
| 0.3% H2O2 | 10 μL | |
| iF488-Tyramide | 2 μL | |
TSA-555 staining solution | Tyramide diluent | 1 mL |
| 0.3% H2O2 | 10 μL | |
| iF555-Tyramide | 2 μL | |
TSA-647 staining solution | Tyramide diluent | 1 mL |
| 0.3% H2O2 | 10 μL | |
| iF647-Tyramide | 2 μL |
Note: After the fluorescent Tyramide is melted, centrifuge it for a short time, and then take it after mixing with clean pipette tips. TSA staining working solution is recommended to be prepared for immediate use. It should be stored at 4°C and protected from light, and it is effective within 24 hours.
Steps
Taking tissue slides as an example, the water in the following experimental steps is pure water.
1. Deparaffinize tissue sections to water;
- Antigen retrieval: According to the primary antibody used and the type of sample, use an appropriate method to perform antigen retrieval on the tissue section.
3. Wash 3 times with PBS, 5 min each time, use an Pap Pen to circle and mark the tissue;
4. Add 100 μL tissue autofluorescence quencher A solution dropwise to the tissue, incubate at room temperature for 30 min, and wash for 5 min;
5. Inactivate endogenous peroxidase: Add 3% H2O2 to the section to cover the tissue, and incubate in the dark at room temperature for 25 minutes, to block endogenous peroxidase to reduce non-specific background staining. Wash 3 times with 1×PBS, 5 min each time;
- Block: After the slides are slightly dried, 3% BSA or serum is added dropwise to seal for 30 minutes. The blocking reagent is determined according to the species of the primary antibody and the secondary antibody;
7. Incubate the primary antibody: Dilute the primary antibody to an appropriate concentration with 1×PBS or blocking solution (G2010 is recommended). Gently shake off the blocking solution on the section, add the diluted primary antibody dropwise to cover the tissue, and place the section flat in a humid chamber box with water and incubate overnight at 4°C. Wash 3 times with 1×PBS, 5 min each time;
8. Incubate the HRP-labeled secondary antibody: Dilute the secondary antibody to an appropriate concentration with 1×PBS or blocking solution (G2010 is recommended), add the secondary antibody dropwise to the tissue, and incubate at room temperature for 50 min. Wash 3 times with 1×PBS, 5 min each time;
- Add 50-100μL TSA-488 staining working solution to the tissue to ensure that the tissue is completely covered, and incubate for 10 min at room temperature in the dark. Wash with 1×PBS 3 times, 5 min each time;
10. Microwave treatment: The tissue section is placed in a repair box filled with antigen retrieval solution (choose the appropriate antigen retrieval solution according to the tissue type and antibody) for microwave heating treatment to remove the bound primary and secondary antibodies. In this step, it is necessary to prevent dry flakes caused by excessive liquid evaporation.
11. Repeat step 7 to incubate the second primary antibody: Dilute the second antibody (primary antibody) to be tested with PBS (or other antibody diluent) to an appropriate concentration. Gently shake off the liquid on the section, add the diluted antibody dropwise to cover the tissue, and place the section flat in a humidified box with water and incubate overnight at 4°C. Wash with PBS 3 times, 5 min each time;
12. Repeat step 8 to incubate the corresponding HRP secondary antibody: dilute the secondary antibody to an appropriate concentration with PBS (or other antibody diluent), add the secondary antibody dropwise to the tissue, and incubate at room temperature for 50 min. Wash with PBS 3 times, 5 min each time;
- Add 50-100μL TSA-555 staining working solution to the tissue to ensure that the tissue is completely covered, and incubate for 10 minutes at room temperature in the dark. Wash with PBS 3 times, 5 min each time;
14. Microwave treatment: The tissue section is placed in a repair box filled with antigen retrieval solution (choose the appropriate antigen retrieval solution according to the tissue type and antibody) for microwave heating treatment to remove the bound primary and secondary antibodies. In this step, it is necessary to prevent dry flakes caused by excessive liquid evaporation.
15. Repeat step 7 to incubate the second primary antibody: Dilute the second antibody (primary antibody) to be tested with PBS (or other antibody diluent) to an appropriate concentration. Gently shake off the liquid on the section, add the diluted antibody dropwise to cover the tissue, and place the section flat in a humidified box with water and incubate overnight at 4°C. Wash with PBS 3 times, 5 min each time;
- Repeat step 8 to incubate the corresponding HRP secondary antibody: dilute the secondary antibody to an appropriate concentration with PBS (or other antibody diluent), add the secondary antibody dropwise to the tissue, and incubate at room temperature for 50 min. Wash with PBS 3 times, 5 min each time;
- Add 50-100μL TSA-647 staining working solution to the tissue to ensure that the tissue is completely covered, and incubate for 10 minutes at room temperature in the dark. Wash with PBS 3 times, 5 min each time;
- Nucleus counterstaining with DAPI: After the sections are dried slightly, add DAPI staining solution to the tissue, and incubate for 10 minutes at room temperature in the dark. Wash with PBS 3 times, 5 min each time.
- Tissue autofluorescence quenching: Add tissue autofluorescence quencher B solution dropwise to the tissue, incubate at room temperature for 5 min, and rinse with running water for 3 min;
20.Mounting and microscopic examination: After the sections are dried slightly, add anti-fluorescence quencher to mount the slides. Observe and collect images with a fluorescence microscope or a confocal laser microscope. The slices can be stored for 15 days at 4°C in a light-proof slide box.
Precautions
1. Compared with fluorescent secondary antibody, TSA kit has higher sensitivity and stronger signal. Therefore, the concentration of the primary antibody needs to be reduced, generally by 5-10 times on the basis of the dilution ratio recommended in the antibody manual, to reduce the background fluorescence caused by non-specific binding. It is recommended to set the gradient concentration of the primary antibody to obtain the best effect.
2. If the background fluorescence is strong, it is recommended to add tissue autofluorescence quenching step.
3. The recommended dilution ratio of fluorescent Tyramide is 1:500, and the dilution ratio can be adjusted according to the experimental results (the recommended dilution ratio range is 1:200-1:1000).
4. For multiple fluorescent labeling, it is recommended to incubate the polyclonal antibody first, then incubate the monoclonal antibody; incubate the antibody corresponding to the low-abundance target protein first, and then incubate the antibody corresponding to the high-abundance target protein.
You Might Also Like
Aluminum Alloy Armored Power Cables
LHD Power Steering Gear for Mazda Bt-50 4WD Ford Ranger (UC2......
Caterpillar 308c 308e Crawler 8 Ton Mini Second Hand Japan C......
Food Handing Kitchen Use Disposable Plastic LDPE Gloves HDPE......
2 USB UV Oil Plastic Travel Charger
20t High Efficiency Movable Frame Gantry Crane for Your Best......
Front End Shovel Loader Agriculture Machinery Equipment with......
Polished Edge 6.38mm, 8.38mm, 12.38mm Laminated Glass
Fast Switch Speed Water Oil Pressure Switch
1j79 Soft Strip for Magnetic Head
180mm End Carriage Wheel for Heady Duty Overhead Crane 3ton