20W Single Band Wireless Repeater 2g 3G 4G LTE Channel Selective Mobile Phone Signal Booster Amplifier

China 20W Single Band Wireless Repeater 2g 3G 4G LTE Channel Selective Mobile Phone Signal Booster Amplifier, Find details about China Repeaters, Mobile Signal Booster from 20W Single Band Wireless Repeater 2g 3G 4G LTE Channel Selective Mobile Phone Signal Booster Amplifier

Band
2g 3G 4G
Output Power
1-20W
Gain
95±3dB
Max. Alc Level
25dB
Vswr
1.5
Group Delay
5us
Impedance
50 Ohms
Power Supply
AC110V/220V
Transport Package
Cartons or Wood Pallet
Origin
Fujian, China
HS Code
8543709200
Band
2g 3G 4G
Output Power
1-20W
Gain
95±3dB
Max. Alc Level
25dB
Vswr
1.5
Group Delay
5us
Impedance
50 Ohms
Power Supply
AC110V/220V
Transport Package
Cartons or Wood Pallet
Origin
Fujian, China
HS Code
8543709200
20W single band wireless repeater 2G 3G 4G LTE Channel Selective mobile phone signal booster amplifier

                                                                             
Description
Channel Selective Bi-directional Boosters are cost effective and reliable solutions designed to extend and improve the coverage area of 2G/3G/4G/5G communication systems. Channel Selective Repeaters allows the user to amplify only desired carriers in both directions, uplink and downlink. Channel selection is programmable locally via RS 232 or remote via OMS. The presence of a Booster provides to the intercom communication system with a high channel occupancy rate, since coverage is extended beyond site coverage. Typical applications of this line of boosters are indoor situations such as tunnels, buildings, subways, and outdoor scenarios such as stadiums, rural areas and dense urban areas. Because it is a dual system of equipment, so you can save the cost of doubling the feeder.


20W Single Band Wireless Repeater 2g 3G 4G LTE Channel Selective Mobile Phone Signal Booster Amplifier

20W Single Band Wireless Repeater 2g 3G 4G LTE Channel Selective Mobile Phone Signal Booster Amplifier
20W Single Band Wireless Repeater 2g 3G 4G LTE Channel Selective Mobile Phone Signal Booster Amplifier
20W Single Band Wireless Repeater 2g 3G 4G LTE Channel Selective Mobile Phone Signal Booster Amplifier



RF Specifications   
ItemSpecificationRemark
Up-LinkDown-Link
Frequency range824 ~ 849 MHz869 ~ 894 MHzCDMA800
1850 ~ 1910 MHz1930 ~ 1990 MHzCDMA1900
824 ~ 849 MHz869 ~ 894 MHzGSM850
880 ~ 915 MHz925 ~ 960 MHzGSM900 & EGSM
1710 ~ 1785 MHz1805 ~ 1880 MHzDCS
1850 ~ 1910 MHz1930 ~ 1990 MHzPCS
1920 ~ 1980 MHz2110 ~ 2170 MHzWCDMA
1710 ~ 1755 MHz2110 ~ 2155 MHzAWS
Channel NumberUp to 16For GSM&DCS
Up to 4For CDMA&
Channel Width200KhzFor GSM&DCS
1.23MhzFor CDMA
5MhzFor
Output Power 30-37 dBm(1-5W)30-43 dBm(1-20W)Customized
Nominal Gain95-65dBCustomized
Pass Band Ripple≤3dB 
Gain Adjust Rang0-30dB in 1 dB steps 
AGC Rang0-30dB 
Max. ALC level≥25dB 
Intermodulation attenuation
)
≤-45dBcFor GSM&DCS
Spurious emission9kHz-1GHz≤-36dBm 
1GHz-12.75GHz≤-30dBm 
Out of Band Gain &
Spurious Emission &
Output inter-modulation
GSM Meet ETSI TS 151 026 V 6.1.0 
 Meet 3GPP TS 25.143 ( V 6.2.0 ) 
CDMA Meet IS95 & CDMA2000 
 SystemSpurious Emission MaskMeet 3GPP TS 25.143 ( V 6.2.0 ) 
Modulation Accuracy≤ 12.5% 
Peak Code Domain Error≤ -35dB@Spreading Factor 256 
Input inter-modulation Meet 3GPP TS 25.143 ( V 6.2.0 ) 
ACRR≥ 30dBc/30KHz @ ± 5MHz 
≥ 50dBc/30KHz @ ± 10MHz
 
CDMA SystemRhoρ > 0.980 
ACPRMeet IS95 & CDMA2000 
Noise Figure.≤5dB(at maximum output power) 
Group delay5-12μsec depending on filter bandwidth and required adjacent channel rejection 
VSWR≤1.5 
RF ConnectorsN - female 
Impedance50 Ohms 


Supervising Specifications
Self diagnostic platformMicroprocessor based
AlarmsYes, amplifiers status, power amplifiers status, power supply failure, battery backup failure, temperature, AGC, RF overload, poor antenna isolation.
Local management and supervisingBuilt-in gain adjustment interface and alarms/status LEDs, PC access via RS-232 (OMS)
Remote management and supervisingRemote access via wireless GSM SMS modem OR GPRS Modem OR Ethernet, option RC (OMS)

Electrical & Mechanical Specifications
AC Supply90-260 VAC (DC Supply optional)
HousingAluminum IP65
Temp rang-30 to +60 ºC
MountingWall mounting as standard, Option PK for pole mounting.


Application: 
Wireless signal repeater is  is used to expand signal coverage of fill signal blind area where signal is weak or unavailable.
 
Outdoor: Airports, Golf Courses, Tourism Regions, Villages, Highway, Tunnels, Mining Districts etc.
Indoor: Hotels, Exhibition Centers, Shopping Malls, Gymnasium, Basements, Offices, Factory, Hospital,Entertainment, Packing Lots etc.


20W Single Band Wireless Repeater 2g 3G 4G LTE Channel Selective Mobile Phone Signal Booster Amplifier


Shipping                                             
1. We will send the goods within 10-15 days after full payment has been confirmed, detail shipping time depend on order quantity.
2. Multiple delivery method for selection, by air, by land, by sea or by expression courier.

20W Single Band Wireless Repeater 2g 3G 4G LTE Channel Selective Mobile Phone Signal Booster Amplifier

Company information:
    Our company, Quanzhou L-TEL Communication Equipment Co.,Ltd. was founded in 2007, located in the technology economically developed city of Quanzhou, Fujian,China. We are focusing on the development, production and sales of a variety of mobile communication repeaters, signal amplifiers and function modules. We are a professional manufacturer specializing in perfect solutions for wireless signal coverage for a variety of occasions. 
  20W Single Band Wireless Repeater 2g 3G 4G LTE Channel Selective Mobile Phone Signal Booster Amplifier

Our present manufacturing service:
1) GSM/CDMA/WCDMA/IDEN/DCS/PCS/LTE/TETRA/DMR/VHF/UHF and other Repeaters (PICO Repeater/ Dual band Repeater/ Fiber Optical repeater/ Band or frequency selective repeater/ Frequency Shifting repeater) and series Trunk Amplifiers.
 
2) Functional Units: Low-noise Power Amplifier Integrative Module, Low-noise Band Selective Power Amplifier Integrative Module, Power Amplifier, Low-noise Amplifier, Channelized Device, Band Selective Device, Band Selective Frequency Shifting Device.
 
3) All kinds of accessories: Antenna/ Filter/Power divider/Connector/ Cable/Coupler/Combiner/Duplexer.
 
4) OEM/ ODM is available.

For more informations,please feel free to contact with us!!!