Products

Non Chemical Offset Printing Processless DOP Thermal CTP Plate

China Non Chemical Offset Printing Processless DOP Thermal CTP Plate, Find details about China Non Chemical CTP Plate, Processless Plate from Non Chemical Offset Printing Processless DOP Thermal CTP Plate

Model NO.
Ecoo-G
Coating Color
Light Green
Trademark
Ecoo
Transport Package
Standard Export Packing
Specification
1030x800x0.30(mm)
Origin
China
HS Code
370130
Model NO.
Ecoo-G
Coating Color
Light Green
Trademark
Ecoo
Transport Package
Standard Export Packing
Specification
1030x800x0.30(mm)
Origin
China
HS Code
370130
EcooGraphix  Negative DOP Processless Non Chemical Thermal CTP Plate
 for offset printing

1.Application
EcooGraphix Ecoo-G is a new, environmentally friendly,Development On Press CTP plate . It can be run directly on a printing press after imaging,without a need for chemical processing.
2.Characteristic
ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution; while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.
 
Plate Technical Specification
  
ModelECOO-G
Plate TypeNon-ablation thermal-negative type
ApplicationHigh grade commercial and newspaper printing
  
SubstrateElectrolyte graining and Anodized AL substrate
Thickness0.15mm / 0.30mm
  
Spectrum  scope800-850nm
PlatesetterVarious dominant thermal platesetters in the market
Low-energy imaging130~150mJ/m²
The period of latent image stabilization≤7days
Recommended
screen method		1~99 @200Lpi AM/20u FM and mixture
The paper number of start-up<50 sheets
Safety Light1 hour under fluorescent lamp, no direct irradiation with natural light, 4 hours under yellow light
ProcessingWithout processing,directly on press
Run Length100,000 impressions,actual run length depends on printing conditions
BakingNo recommended
Characteristics 
  
Negative non-ablation photosensitive system
Compatible with the dominant devices in the market
Can be printed directly on the machine without any processing steps after scanning by thermal CTP platesetter
  
Good dot reproduction,stable performance,wide processing latitude
Long stability of latent image,can be stored at least a week after plate-making
  
High quality aluminum substrate,professional coating formulation
Application 
Suitable for sheet-fed offset press or high speed rotary offset press
  
Run length:100,000 impressions
Suitable for different types of traditional inks and fountain solutions,including alcohol's substitutes as fountain solutions
  
Unsuitable to improve run length by baking plates
Transportation and Storage   
Packed in seal and stored by means of preventing from light/moisture,over heat and high humidity.
  
Recommended conditions:18ºC~24ºC,40%~50% RH.

    ECOO-G thermal plate is a new environmental-friendly processless printing plate.        
    ECOO-G plate can be run on press machine directly after CTP exposing, no need chemistry processing. It is double layer plate: emulsion layer is on the aluminum, and protection layer is above emulsion layer.
    The emulsion layer is negative photopolymerization /cross-link, can be exposed by 800-850nm wave-length. So all the known thermal CTPs (can expose normal thermal plate) on the market can expose this plate, only set up the exposure parameter to "negative".
     The protection layer is water-soluble polymer. It is mainly used to protect the emulsion layer high sensitivity (low exposure energy required), and from damaging as well. Therefore, it is important to keep the plate away from any water, steam or even sweat materials.
     ECOO-G plate will be affected by high temperature and high humidity. Recommended shipment and storage condition is 18-25 OC, RH 30-50%.

Non Chemical Offset Printing Processless DOP Thermal CTP Plate



Our Factory:

Non Chemical Offset Printing Processless DOP Thermal CTP Plate

Non Chemical Offset Printing Processless DOP Thermal CTP Plate

FAQ
Q1: Can I get the sample?
A: We are very glad to provide some sample for you to test. We usually provide 5-15pieces plates for free,but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.
Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.
Q3: How long can the sample be ready?
 A: It usually takes about 3days to prepare the sample.
Q4: Can I visit your factory?
A: You are warmly welcomed to visit our factory! Our company is in Hangzhou city,which is about 1.5 hour by train from Shanghai.
Q5: How many Square Meters CTP plates can feed one 20' container?
A: About 20000-25000SQM



More Information, Please CONTACT:
Non Chemical Offset Printing Processless DOP Thermal CTP Plate
 

You Might Also Like