Products

Hall IC, Ah3144e Hall Sensor, Hall Effect, Unipolar, Magnetic Sensor, Hall Switch

China Hall IC, Ah3144e Hall Sensor, Hall Effect, Unipolar, Magnetic Sensor, Hall Switch, Find details about China Hall Effect Sensor, Hall IC from Hall IC, Ah3144e Hall Sensor, Hall Effect, Unipolar, Magnetic Sensor, Hall Switch

Model NO.
AH3144E
Task
Following
Structure
Combination
Signal
Continuous
Trademark
AHNJ
Transport Package
Carton
Specification
ROHS, REACH
Origin
Nanjing, China
HS Code
85423100
Model NO.
AH3144E
Task
Following
Structure
Combination
Signal
Continuous
Trademark
AHNJ
Transport Package
Carton
Specification
ROHS, REACH
Origin
Nanjing, China
HS Code
85423100
  • Features
 
  • Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V;
  • Operating temperature range: -40ºC ~ 150ºC;
  •  Rated output current(sink) : 25 mA, the maximum output current(sink): 50 mA
  • Switch response time is about 1μs, the operating frequency DC ~ 100 kHz;
  • Small temperature drift between operating point and release point;
  • There are variety of packages and out packing options;
  • No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;
  • Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements
  • Outline
  • When the "N" pole of magnet faces the mark surface of the sensor and is closed to sensor (B≤Bop),the sensor outputs low level; When the magnet is far away from sensor(B≥BRP), the sensor outputs high level. When the "S" pole faces the mark surface of sensor,the sensor is no response. Stable Hyteresis((BH= |BOP- BRP|)ensures stable switch status of sensor. The magnet and electric transfer characteristic curve is shown as the figure:
  • Hall sensor AH3144N is one of unipolar excitation single-ended digital output Hall IC.  The sensor chip has built-in reverse voltage protection, voltage regulators, temperature compensation circuit, Hall-voltage generator, signal amplifier, Schmitt trigger and open collector output driver circuit unit etc. Excellent voltage regulator and temperature compensation circuit ensure the sensor stable operates over a wide voltage range and temperature range, and the reverse voltage protection circuit avoids the sensor to be damaged by reverse voltage.
  • Limit Parameter
    ParametersymbolMin.Max.Unit
    Storage Temp.Ts-55175ºC
    Supply VoltageVCC3.528V
    Output Cut-off VoltageVO(off)-25V
    Magnetic InductionBunlimitedunlimitedmT
    Output CurrentIO-50mA
     
  • Electrostatic Grade
  • Under human being mode, the Electrostatic compression is large than ±6kV.

     
     
  • Operating Condition
  • ParameterSymbolMin.Max.Unit
    Supply VoltageVCC4.524V
    Operating Temp.Ta-40150ºC
    Output CurrentIO-5mA
     
  • Electrical Characteristc
  • ParamaterSymbolTest ConditionTyp.MaxUnit
    Output Low LevelVOLVCC1=4.5, VCC2=24V, IO=25mA,B≥BOP0.20.4V
    Output High LevelVOHVCC1=4.5, VCC2=24V, IO=25mA,B≤BRP23.524V
    Output Leakage CurrentIOHVCC2=24V,VCC1 open circuit0.110μA
    Supply CurrentICCVCC1=24V,Vo open circuit3.58mA
    Output Rise Edge TimetRVCC1=VCC2=12V,
    RL=1.2kΩ,    CL=20pF    		125150ns
    Output Fall Edge TimetF6080ns
     

     
    Magnetic Characteristic
    Test condition:VCC1 = VCC2 =24V,IO = 50mA
    Parameter SymbolMin.Typ.Max.
    Operate PointBOP-25--
    Release PointBRP---3
    Hysteresis
    ∣Operate point-Release point∣    		BH
    ∣BOP-BRP∣    		2-6
     
     Note 1: Unit is mT, 1mT=10Gs
    Note2:  When the "S" Pole of the magnetic field is vertical to the front mark of product, we call the magnetic field B>0.
    Hall IC, Ah3144e Hall Sensor, Hall Effect, Unipolar, Magnetic Sensor, Hall SwitchHall IC, Ah3144e Hall Sensor, Hall Effect, Unipolar, Magnetic Sensor, Hall SwitchHall IC, Ah3144e Hall Sensor, Hall Effect, Unipolar, Magnetic Sensor, Hall SwitchHall IC, Ah3144e Hall Sensor, Hall Effect, Unipolar, Magnetic Sensor, Hall Switch

    You Might Also Like