Climate Test Chamber / Temperature and Humidity Testing Equipment

China Climate Test Chamber / Temperature and Humidity Testing Equipment, Find details about China Environmental Test Chamber, Environmental Chamber from Climate Test Chamber / Temperature and Humidity Testing Equipment

Model NO.
ZH-HS-150D
Heating Rate
2.0~4.0c/Min, or Fast Rate (up to 30c/Min) Customi
Cooling Rate
0.7~1.0c/Min, or Fast Rate (up to 30c/Min) Customi
Cabling Port
Diameter 50mm/100mm Optional
Cooling Mode
Air Cooled (or Water-Cooled Optional)
Inner Material
SUS304#
External Material
Blue Color Painted (or SUS304#)
Compressor Brand
Tecumseh (France)
Service
OEM / ODM / Non-Standard Available
Power Supply
220V, 1 Phase, 50/60Hz
Controller
Independent R&D Software Programmable 7 Inch Scree
Controller Display
Programmable 7′′ Colorful
Trademark
Sailham
Transport Package
Fumigation-Free Wooden Box Packaging
Specification
Customization available
Origin
Guangdong, China
HS Code
8479899990
Model NO.
ZH-HS-150D
Heating Rate
2.0~4.0c/Min, or Fast Rate (up to 30c/Min) Customi
Cooling Rate
0.7~1.0c/Min, or Fast Rate (up to 30c/Min) Customi
Cabling Port
Diameter 50mm/100mm Optional
Cooling Mode
Air Cooled (or Water-Cooled Optional)
Inner Material
SUS304#
External Material
Blue Color Painted (or SUS304#)
Compressor Brand
Tecumseh (France)
Service
OEM / ODM / Non-Standard Available
Power Supply
220V, 1 Phase, 50/60Hz
Controller
Independent R&D Software Programmable 7 Inch Scree
Controller Display
Programmable 7′′ Colorful
Trademark
Sailham
Transport Package
Fumigation-Free Wooden Box Packaging
Specification
Customization available
Origin
Guangdong, China
HS Code
8479899990
Climate test chamber / Temperature and humidity testing equipment

Climate test chamber / Temperature and humidity testing equipment is available as standard products in a variety of sizes to suit your needs. Our environmental test chambers are often used for steady-state stability testing, basic temperature cycling and accelerated stress testing. In keeping with the needs of today's lab, we designed these temperature and humidity test chambers to have a compact exterior that maximizes the interior workspace. 

Lowest temperature: -40 or -70°C (-4 or -100°F)
Highest temperature: 150°C (302°F)
Humidity range: 20 to 98% RH
Chamber size: 3.53 cubic feet
Touch-screen Watlow F4T programmer with Ethernet access



Climate Test Chamber / Temperature and Humidity Testing Equipment


Climate Test Chamber / Temperature and Humidity Testing Equipment

Narrow type / Case type, difference color can be customzied


Technical parameters
ModelZH-HS-80
(A~F)
ZH-HS-150
(A~F)
ZH-HS-225
(A~F)
ZH-HS-408
(A~F)
ZH-HS-800
(A~F)
ZH-HS-1000
(A~F)
Inner size: WHD(cm)40*50*4050*60*5060*75*5060*85*80100*100*80100*100*100
External size: WHD(cm)105*165*98105*175*108115*190*108135*200*115155*215*135155*215*155
Temperature range(Low:A:+25ºC; B:0ºC;C:-20ºC; D:-40ºC;E:-60ºC;F:-70ºC) (High:+100ºC/+150ºC)
Humidity range20%~98% R.H.(10%~98%R.H);(5%~98%R.His special optional condition)
Temp analytic accuracy/uniformity0.1ºC/±2.0ºC
Temperature Fluctuation±0.5ºC
Humidity analytic accuracy/ Humidity  control accuracy±0.1%;±2.5%
Heat; cooling timeHeat up about 4.0°C/min ;  Cooling about 1.0°C/min
Inner and outer materialsSUS#304 Stainless steel for inner chamber ; Carton Advanced cold plate nano paint for outer
Insulation materialsResistant to high temp ,high density,formate chlorine,ethyl acetum foam insulation materials
Cooling systemAir cooling/single segment compressor(-40°C) ,air and water double segment compressor
(-50°C~-70°C)
Protection devicesFuse switch, compressor overload switch, refrigerant high and low pressure protection 
switch,
super humidity over-temperature protection switch, fuse, failure warning system
PartsWatching window , 50mm testing hole , PL internal bulbs , Wet and dry bulb gauze , partition plate , castorx4,Foot Cupx4
CompressorOriginal France"Tecumseh"brand
ControllerTEMI South Korea
PowerAC220V 50/60Hz & 1, AC380V 50/60Hz 3
weight (kg)150220270320450580
 

 

Core accessories 


Climate Test Chamber / Temperature and Humidity Testing Equipment
Climate Test Chamber / Temperature and Humidity Testing Equipment


Climate Test Chamber / Temperature and Humidity Testing Equipment


Manufacture process

Climate Test Chamber / Temperature and Humidity Testing Equipment


Features

High performance and quiet operation (65 dBa)
Space-saving footprint, designed for flush installation to wall
Stainless steel exterior
Full thermal break around doorframe
One 50mm (2") diameter cable port on left, with flexible silicone plug(special requirement)
Three levels of overheat protection, plus overcool protection
Easy lift-off service panels, electrical access on left
Detachable eight-foot power cord with plug
Direct water supply connection for continuous operation (supply tank optional)
ETL listed electrical panel conforming to UL 508A


Our Factory
Climate Test Chamber / Temperature and Humidity Testing Equipment


Climate Test Chamber / Temperature and Humidity Testing Equipment



Honorary Certifications:

Climate Test Chamber / Temperature and Humidity Testing Equipment







Exhibitions and customers visit our factory

Climate Test Chamber / Temperature and Humidity Testing Equipment



FAQ:

Q: What's the payment term?

A: T/T, L/C and other payment terms could be negotiated.

 

Q:Do you accept customization service?
A:Yes, of course, we can not only offer standard High and Low Temperature Alternating Damp Heat Testing Chamber, but also customized machines according to your request. Don't hesitate to tell us your requirement, we will try our best to meet your needs.

 

Q:How about your warranty?
A:Generally, our warranty is one year. Within the warranty period, we can offer technique support, Feedback to you within 24 hours and help you to repair your problem controller freely, even it's not from our factory 

 

Q:Can we visit your factory before order?
A:Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to arrange hotel and pick up you from airport.

 

Q: What's the delivery term?
A:At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20 working days after deposit receipt. If you are in urgent need, we can consider making special arrangement for you.

 

Q:How about the packing for machine, is it safely protected during transportation?
A: Testing Chamber is packed by standard export wooden box for outside package and stretch film for inner package, it won't be damaged. We've delivered many testing machines abroad by sea or by air without damage.




Contact US