Products

20t Double Ply Webbing Sling According to En1492 -1 (Polyester 100%)

China 20t Double Ply Webbing Sling According to En1492-1 (Polyester 100%), Find details about China Lifting Sling, Lifting Belt from 20t Double Ply Webbing Sling According to En1492-1 (Polyester 100%)

Model NO.
WSDP-200 SERIES
Certification
CE, ISO 9001, Leea
Sling Color
Orange
Safety Factor
7:1 or 6:1 or 5:1
Technical Specifications
En1492-1
Width
300mm
Trademark
H-Lift or OEM
Origin
Zhejiang, China
HS Code
6307900090
Model NO.
WSDP-200 SERIES
Certification
CE, ISO 9001, Leea
Sling Color
Orange
Safety Factor
7:1 or 6:1 or 5:1
Technical Specifications
En1492-1
Width
300mm
Trademark
H-Lift or OEM
Origin
Zhejiang, China
HS Code
6307900090
20t Double Ply Webbing Sling According to En1492-1 (Polyester 100%)

-Colour coded according to EN 1492-1

-Safety Factor 8:1, 7:1, 6:1, 5:1 (upon request)

-Low elongation. 

-Extremely wear-resistant. 
 
ITEMColourcoded According to EN 1492-1Width
(SF:7:1)
mm		Working  load limit 1 webbing slingWorking  load limit 2 webbing sling
Straight LiftChoked LiftβStraight lift up to 45°Choked lift up to 45°Straight lift up to 45°-60°Choked lift up to 45°-60°
0°-7°7°-45°45°-60°
         
1.00.82.01.41.01.41.121.00.8
WSDP-201WLL 1T301,0008002,0001,4001,0001,4001,1201,000800
WSDP-202WLL 2T602,0001,6004,0002,8002,0002,8002,2402,0001,600
WSDP-203WLL 3T903,0002,4006,0004,2003,0004,2003,3603,0002,400
WSDP-204WLL 4T1204,0003,2008,0005,6004,0005,6004,4804,0003,200
WSDP-205WLL 5T1505,0004,00010,0007,0005,0007,0005,6005,0004,000
WSDP-206WLL 6T1806,0004,80012,0008,4006,0008,4006,7206,0004,800
WSDP-208WLL 8T2408,0006,40016,00011,2008,00011,2008,9608,0006,400
WSDP-210WLL 10T30010,0008,00020,00014,00010,00014,00011,20010,0008,000
WSDP-212WLL 12T30012,0009,60024,00016,80012,00016,80013,44012,0009,600


Lifting Eye Types
20t Double Ply Webbing Sling According to En1492-1 (Polyester 100%)

 
Protective sleeve for labels
Additional protective sleeve for the load capacity label is available upon request. If required, the protective sleeve for the label may also be stitched onto the webbing. As webbing slings without labels must be decommissioned, protective sleeves for the label may significantly extend the lifespan of textile sling.
 
ALWAYS:
· Store and handle webbing slings correctly.
· Inspect webbing slings and accessories before use and before placing into storage.
· Follow safe slinging practices, as given overleaf.
· Position the bight for choke lift at 120° (natural angle).
· Position the sling so that the load is uniformly spread over its width and protect the sling from sharp edges.
· Apply the correct mode factor for the slinging arrangement.

NEVER:
· Attempt to shorten, knot or tie webbing slings.
· Expose webbing slings to direct heat or flames.
· Use webbing slings at temperatures above 80°C or below 0°C without consulting the supplier.
· Expose webbing slings to chemicals without consulting the supplier.
· Shock load webbing slings.
· Use webbing slings which are cut or which have loose or damaged stitching.
· Use a sling with a missing/damaged label or illegible markings

20t Double Ply Webbing Sling According to En1492-1 (Polyester 100%)
20t Double Ply Webbing Sling According to En1492-1 (Polyester 100%)

Frequently Asked Questions

Q1. How often should lifting equipments be subject to thorough examantions?

Thorough examination of lifting equipment must take place every 12 months - or every 6 months if the equipment is used to lift people. Any accessories used in lifting should also be inspected every 6 months. These are the minimum requirements, where there is no formal 'examination scheme' drawn up by a competent person.

Q2. What is a competent person ?

A competent person is someone who has appropriate practical and theoretical knowledge and experience of the equipment for which they act as 'competent person'. This knowledge and experience can help them detect defects / weaknesses and assess whether they will affect the continued safe use of the equipment.

Q3. Does new lifting equipment have to be thoroughly examined before use ?

You must have lifting equipment examined in the following circumstances:

Before using it for the first time - unless the equipment has an EC Declaration of Conformity which is less than one year old and the lifting equipment was not assembled on site. If it was assembled on site, it must be examined by a competent person to confirm that the assembly was correct and safe.
After assembly, and before use at each location - for all lifting equipment that requires assembly or installation before use (eg tower crane) - to ensure it has been installed correctly and is safe for use.

You Might Also Like