Three-Phase AC Power 750W Zdf3 Hypoid Gear Motor for Food Packaging Machine

China Three-Phase AC Power 750W Zdf3 Hypoid Gear Motor for Food Packaging Machine, Find details about China Hypoid Gear Motor, AC Motor from Three-Phase AC Power 750W Zdf3 Hypoid Gear Motor for Food Packaging Machine

Basic Info.

Model NO.

ZDF3-35H10-750-S3

Starting Mode

Direct on-line Starting

Certification

ISO9001, CCC

Brand

Voltage

220V/380V

Deceleration Method

Hyperbolic Gear/Helical Gear

Output Shaft Torque

21~554 N.M

Rated Speed

1430~1730 R/Min

Trademark

Transport Package

Carton

Specification

750W

Origin

China

HS Code

8501400000

Model NO.

ZDF3-35H10-750-S3

Starting Mode

Direct on-line Starting

Certification

ISO9001, CCC

Brand

Voltage

220V/380V

Deceleration Method

Hyperbolic Gear/Helical Gear

Output Shaft Torque

21~554 N.M

Rated Speed

1430~1730 R/Min

Trademark

Transport Package

Carton

Specification

750W

Origin

China

HS Code

8501400000

Product Desciption

Three-phase AC Power 750W ZDF3 Hypoid Gear Motor for Food Packaging Machine

ZDF3 Hypoid gear motor uses three-phase AC power as the input power, which is a combination of a high-power motor and a high-strength off-axis bevel gear motor. It has advantages of small size, low noise, high efficiency, long life, diversified output shafts and installation space-saving, widely used in food packaging machine, CNC Machine tool, large security inspection machines, meat grinders, chip conveyors, assembly lines, etc.

The Features of ZDF3 Hypoid Gear Motor:

1. Space-saving
2. Stable speed control
3. The output shaft of the gear motor is positioned in the center of mounting surface, therefore when it is installed in the conveyor and other devices, whether the installation direction is left or right, it does not need to change the location of the installation hole.

How To Read

ZDF3 - 35 H 10 LB - 750 - S3 B
a b c d e f g h

a	Series	ZDF3: F3 series
b	Shaft diameter or bore diameter
c	The shaft type
d	Reduction ratio	(e.g) 30: 30:1
e	Indicates the direction of the junction box (Standard type is omitted)
f	Rated output power	(e.g) 750: 750W
g	Power Supply	S: Three-phase 220V 50/60Hz S3: Three-phase 380V 50/60Hz
h	Attachment unit	B: Brake FF: Axial flow fan P: Thermal protector

Continuous Rating

Model	Output Power	Voltage	Frequency	Rated Current	Rated Torque	Rated Speed	Locked Rotor Torque	Locked Rotor Current	Insulation Grade
Model	W	V	Hz	A	N.m	r/min	N.m	A	Insulation Grade
ZDF3-35H( )-750-S(B) ZDF3-45H( )-750-S(B)	750	200	60	3.45	4.22	1700	9.20	10.0	F
ZDF3-35H( )-750-S(B) ZDF3-45H( )-750-S(B)		220	50	4.24	5.00	1430	15.5	12.0
ZDF3-35H( )-750-S₃(B) ZDF3-45H( )-750-S₃(B)		380	50	2.45	5.00	1430	15.5	12.0
ZDF3-35H( )-750-S₃(B) ZDF3-45H( )-750-S₃(B)		460	60	2.28	4.12	1730	16.0	13.2

Model	Output Power	Voltage	Frequency	Rated Current	Rated Torque	Rated Speed	Locked Rotor Torque	Locked Rotor Current	Insulation Grade
Model	W	V	Hz	A	N.m	r/min	N.m	A	Insulation Grade
ZDF3-32A( )-750-S(B) ZDF3-40A( )-750-S(B)	750	200	60	3.45	4.22	1700	9.20	10.0	F
ZDF3-32A( )-750-S(B) ZDF3-40A( )-750-S(B)		220	50	4.24	5.00	1430	15.5	12.0
ZDF3-32A( )-750-S₃(B) ZDF3-40A( )-750-S₃(B)		380	50	2.45	5.00	1430	15.5	12.0
ZDF3-32A( )-750-S₃(B) ZDF3-40A( )-750-S₃(B)		460	60	2.28	4.12	1730	16.0	13.2

Power	Aperture/Axis Diameter	Reduction Ratio	Output Shaft Speed	Output Shaft Torque		Output Shaft Tolerance		Output Shaft Tolerance
Power	Aperture/Axis Diameter	Reduction Ratio	r/min	N.m	Kgf.m	Output Shaft Tolerance		Axial Force Load
W	mm	i	50Hz	50Hz	50Hz	N	kgf	N	kgf
750	35/32	5	300	21	2.110	1960	200	500	51
		7.5	200	30	3.100	2250	230	567	58
		10	150	41	4.230	2450	250	613	63
		12	125	50	5.070	2600	265	669	68
		15	100	62	6.340	2740	280	686	70
		20	75.0	83	8.460	2990	305	747	76
		25	60.0	104	10.57	3190	326	796	81
		30	50.0	124	12.69	3280	335	821	84
		40	37.5	166	16.91	3480	335	870	89
		50	30.0	207	21.14	3480	335	870	89
		60	25.0	249	25.37	3480	335	870	89
	45/40	80	18.8	298	30.45	4750	485	1177	120
		100	15.0	373	38.06	4750	485	1177	120
		120	12.5	448	45.67	4750	485	1177	120
		*160	9.40	554	56.53	5190	530	1275	130
		*200	7.50	554	56.53	5190	530	1275	130
		*240	6.30	554	56.53	5190	530	1275	130

Note: The * for the torque limit model, please read this table.

Dimensions(Unit: mm):

Electromagnetic Brake Type

Types and selection of wiring

Connection	Select Points	Frequency Converter	Lifting Operation	Provincial Distribution	Brake Delay
AC switch (A)	Because the motor and the electromagnetic braking part can use different circuits, the most suitable for the drive of the frequency converter.	© (Most suitable)	○ (Can be used)	○	○
AC switch (B)	The most simple way, that is, only by power cable wiring can run. The number of wiring is also relatively reduced.	× (Out of commission)	× (Out of commission)	©	Δ

Note: The so-called brake delay time is to turn off the switch to the beginning of the braking time, and the braking time is different.

Connection Method

Other models of ZDF3 Hypoid gear motor

Three-Phase AC Power 750W Zdf3 Hypoid Gear Motor for Food Packaging Machine

1.Maintenance time & Warranty: 1 year after leaving factory
2.Other service: Including modeling selection guide, installation guide, and problem shooting guide, etc.

Q: What're your main products?
A: We currently produce Brushed DC Motors, Brushed DC Gear Motors, Planetary DC Gear Motors, Brushless DC Motors, AC Motors, High Precision Planetary Gearbox and Precision Cycloidal Gearbox etc.. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q: How to select a suitable motor or gearbox?
A:If you have motor pictures or drawings to show us, or you have detailed specifications, such as, voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have a customized service for your standard motors or gearboxes?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but some kind of molds are necessory to be developped which may need exact cost and design charging.

Q: What's your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.