Zd Three-Phase AC Power 200W Zdf3 Hypoid Gear Motor with Hyperbolic Gear and Helical Gear
China Zd Three-Phase AC Power 200W Zdf3 Hypoid Gear Motor with Hyperbolic Gear and Helical Gear, Find details about China Hypoid Gear Motor, AC Motor from Zd Three-Phase AC Power 200W Zdf3 Hypoid Gear Motor with Hyperbolic Gear and Helical Gear
ZD Three-Phase AC Power 200W ZDF3 Hypoid Gear Motor with Hyperbolic Gear and Helical Gear
ZDF3 Hypoid gear motor uses three-phase AC power as the input power, which is a combination of a high-power motor and a high-strength off-axis bevel gear motor. It has advantages of small size, low noise, high efficiency, long life, diversified output shafts and installation space-saving, widely used in food packaging machine, CNC Machine tool, large security inspection machines, meat grinders, chip conveyors, assembly lines, etc.
The Features of ZDF3 Hypoid Gear Motor:
1. Space-saving
2. Stable speed control
3. The output shaft of the gear motor is positioned in the center of mounting surface, therefore when it is installed in the conveyor and other devices, whether the installation direction is left or right, it does not need to change the location of the installation hole.
How To Read
ZDF3 - 30 H 240 LB - 200 - S3 B
a b c d e f g h
| a | Series | ZDF3: F3 series |
| b | Shaft diameter or bore diameter | |
| c | The shaft type | |
| d | Reduction ratio | (e.g) 30: 30:1 |
| e | Indicates the direction of the junction box (Standard type is omitted) | |
| f | Rated output power | (e.g) 200:200W |
| g | Power Supply | S: Three-phase 220V 50/60Hz S3: Three-phase 380V 50/60Hz |
| h | Attachment unit | B: Brake FF: Axial flow fan P: Thermal protector |
Continuous Rating
| Model | Output Power | Voltage | Frequency | Rated Current | Rated Torque | Rated Speed | Locked Rotor Torque | Locked Rotor Current | Insulation Grade |
| W | V | Hz | A | N.m | r/min | N.m | A | ||
| ZDF3-25H( )-200-S(B) ZDF3-30H( )-200-S(B) | 200 | 200 | 60 | 1.10 | 1.12 | 1700 | 2.25 | 4.93 | F |
| 220 | 50 | 1.35 | 1.36 | 1400 | 3.50 | 5.40 | |||
| ZDF3-25H( )-200-S3(B) ZDF3-30H( )-200S3(B) | 380 | 50 | 0.78 | 1.36 | 1400 | 3.50 | 3.10 | ||
| 460 | 60 | 0.78 | 1.12 | 1740 | 3.80 | 3.75 |
| Model | Output Power | Voltage | Frequency | Rated Current | Rated Torque | Rated Speed | Locked Rotor Torque | Locked Rotor Current | Insulation Grade |
| W | V | Hz | A | N.m | r/min | N.m | A | ||
| ZDF3-22A( )-200-S(B) ZDF3-28A( )-200-S(B) | 200 | 200 | 60 | 1.10 | 1.12 | 1700 | 2.25 | 4.93 | F |
| 220 | 50 | 1.35 | 1.36 | 1400 | 3.50 | 5.40 | |||
| ZDF3-22A( )-200-S3(B) ZDF3-28A( )-200-S3(B) | 380 | 50 | 0.78 | 1.36 | 1400 | 3.50 | 3.10 | ||
| 460 | 60 | 0.78 | 1.12 | 1740 | 3.80 | 3.75 |
| Power | Aperture/Axis Diameter | Reduction Ratio | Output Shaft Speed | Output Shaft Torque | Output Shaft Tolerance | Output Shaft Tolerance | |||
| r/min | N.m | Kgf.m | Axial Force Load | ||||||
| W | mm | i | 50Hz | 50Hz | 50Hz | N | kgf | N | kgf |
| 200 | 25/22 | 5 | 300 | 5.5 | 0.560 | 1230 | 126 | 307 | 31 |
| 7.5 | 200 | 8 | 0.790 | 1370 | 140 | 342 | 35 | ||
| 10 | 150 | 11 | 1.130 | 1520 | 155 | 380 | 39 | ||
| 12 | 125 | 13 | 1.350 | 1620 | 165 | 405 | 41 | ||
| 15 | 100 | 17 | 1.690 | 1720 | 176 | 429 | 44 | ||
| 20 | 75.0 | 22 | 2.260 | 1860 | 190 | 466 | 48 | ||
| 25 | 60.0 | 28 | 2.820 | 2010 | 205 | 502 | 51 | ||
| 30 | 50.0 | 33 | 3.380 | 2110 | 215 | 527 | 54 | ||
| 40 | 37.5 | 44 | 4.510 | 2300 | 235 | 576 | 59 | ||
| 50 | 30.0 | 55 | 5.640 | 2450 | 250 | 613 | 63 | ||
| 60 | 25.0 | 66 | 6.770 | 2550 | 260 | 637 | 65 | ||
| 30/28 | 80 | 18.8 | 80 | 8.120 | 3090 | 315 | 755 | 79 | |
| 100 | 15.0 | 99 | 10.15 | 3140 | 320 | 785 | 80 | ||
| 120 | 12.5 | 119 | 12.18 | 3140 | 320 | 785 | 80 | ||
| 160 | 9.40 | 159 | 16.24 | 3140 | 320 | 785 | 80 | ||
| *200 | 7.50 | 184 | 18.80 | 3140 | 320 | 785 | 80 | ||
| *240 | 6.30 | 184 | 18.80 | 3140 | 320 | 785 | 80 | ||
Note: The * for the torque limit model, please read this table.
Dimensions(Unit: mm):
Electromagnetic Brake Type
Types and selection of wiring
| Connection | Select Points | Frequency Converter | Lifting Operation | Provincial Distribution | Brake Delay |
| AC switch (A) | Because the motor and the electromagnetic braking part can use different circuits, the most suitable for the drive of the frequency converter. | © (Most suitable) | ○ (Can be used) | ○ | ○ |
| AC switch (B) | The most simple way, that is, only by power cable wiring can run. The number of wiring is also relatively reduced. | × (Out of commission) | × (Out of commission) | © | Δ |
Connection Method
Other models of ZDF3 Hypoid gear motor
1.Maintenance time & Warranty: 1 year after leaving factory
2.Other service: Including modeling selection guide, installation guide, and problem shooting guide, etc.
Q: What're your main products?
A: We currently produce Brushed DC Motors, Brushed DC Gear Motors, Planetary DC Gear Motors, Brushless DC Motors, AC Motors, High Precision Planetary Gearbox and Precision Cycloidal Gearbox etc.. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.
Q: How to select a suitable motor or gearbox?
A:If you have motor pictures or drawings to show us, or you have detailed specifications, such as, voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.
Q: Do you have a customized service for your standard motors or gearboxes?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.
Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but some kind of molds are necessory to be developped which may need exact cost and design charging.
Q: What's your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
You Might Also Like
Mfr Rate Index Plastic Melt Flow Analyzer Test Testing Equip......
Metal CNC Plasma Cutting Machine for 3-35mm Iron, Steel Cutt......
Precast Concrete Threaded Waved Lifting Wavy Tail Anchor
Bateria Litio E-Bike Battery 48V 12.5ah Replacement in Frame......
High Quality Gym Fitness Medical Salon Equipment Abdominal S......
Black Red Good Racing Office Seat Gaming Chairs
LED Large Outdoor Christmas Ornaments Balls Giant 3D Motif L......
Multi Functional Gym Equipment 45 Angled Leg Press & Hack Sl......
UV Aging Test Chamber for Products Accelerate Aging Test
Copper Clad Laminate Use Al2O3 Top Quality Spherical Aluminu......
Medical ECG Electrocardiograph Device 12 Channel Sun-8121
Equivalent to Nomex Fire Retardant Coverall