1. Equipment Name:                          cold  isostatic press
2. Equipment type:                         CIP500/1200-400YS
3. Characteristics:  a. Both of  cylinder vessel and yoke frame made by pre-stressed steel wire wound                                                                                      Inner cylinder vessel materials: 34CrNi3Mov alloy, Whole part forged                                                                                                            designed service life more than 300,000 times pressing                                                                                                                                 b. Double working mediums and isolated                                                                                                                                                       c. Yoke frame moving mode
4. Maximum working pressure of Working cylinder:  400MPa
5. Maximum working pressure of supercharger:       400MPa
6. The effective inner diameter of   suppress cylinder vessel: Ø 500mm
7. The effective inner height of   suppress cylinder vessel:              1200mm
8. useful filling diameter of suppress cylinder vessel:       Ø420mm
9. useful filling  height  of  suppress cylinder vessel:       1150mm
10. Pressing system Working medium :                      emulsion (90-95% water, 5-10% anti-corrosive additive).
11. Hydraulic system driving medium :                    L-HM32 anti-wear hydraulic oil
12. Compression system Transmission medium :     55%  L-HM32 + 45% Kerosene.
13. No working parts pressure rising time:  0~400MPa,t≤6 min
14. Assistant time: upper plug close+ frame move in:t≤1.5min                                                                                                                                                       upper plug open+frame remove :   t≤1.5min
15. pressure hold time  : 0~9999s Setting freely
16. pressure falls during pressure holding   : hold  30min,falls≤2%   (pressure setable   self-compensation automatically )
17. .High  pressure measurement accuracy:                  0.5%FS
18.  Equipped with 3 sets of high efficiency and reliability Supercharger:                                                                                                                  a.Reciprocating plunger type supercharging, contactless switch mode commutation which  controlled  by  DC24V power supply,              b.  The maximum output flow rate is 3.8 L/min for each supercharger, The seal service life: more than 10 thousand  times pressing          c.The cylinder main materials: martensitic precipitation hardening stainless steel                                                                                          d.Designed and manufactured by Suohaipu Isostatic with Independent intellectual property rights
19. Control mode:                  PLC(Siemens)+HMI(MCGS) / Automatic and Manual mode
20. Pressure relief mode:      Multistage pressure relief, speed automatic and manual adjustable 
21. Isolation System: Adopt double mediums working style with rubber sleeve isolation system.
22. Cooling System: With independent cooling system and does not require external cooling water.
23. Safety Protection: With mechanical safety protection, Electric control protection and On-site safety   warning
24. Total weight 25-27MT,the biggest weight is the yoke frame,15MT about, and the second weight is the cylinder vessel: 8.5MT about.
25. With CE Certificate with PED directive
26. Install Way: on floor install
27. Power Supply system:                                  50Hz,380V,Three-phase five wire system
28. Working condition                       0 ºC~ 45 ºC, Relative Humidity not more than 90%
29. Warranty:  for two years
30. Install Power : ≈ 80 kw
31. Install  area: ≈30 m2

 Our main type of press  is as follows:                                  

1. Cold Isostatic Press:a. The vessel inner materials is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.
b.Whole procedure of the cold isostatic pressing (CIP) machine, increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running

2. Hot Isostatic Press:
3.  Warm Isostatic Press:a.The vessel inner materials of WIP is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.
b.Whole procedure of the warm isostatic press machine (WIP ) , increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running.

Contact Us: