ISO Large Thrust Electrodynamic Horizontal Vertical Shock Vibration Test Machine

China ISO Large Thrust Electrodynamic Horizontal Vertical Shock Vibration Test Machine, Find details about China Electric Vibration Test System, Vibration Test System from ISO Large Thrust Electrodynamic Horizontal Vertical Shock Vibration Test Machine

Model NO.
LC-600-6
Max. Vibration Force
6400
Max. Displacement(Mmp-P)
51
Max. Speed(M/S)
2.00
Cooling Method
Forced Air Cooling
Trademark
LIK
Transport Package
Strong Wooden Case
Specification
Customized available
Origin
China
HS Code
9032810000
Model NO.
LC-600-6
Max. Vibration Force
6400
Max. Displacement(Mmp-P)
51
Max. Speed(M/S)
2.00
Cooling Method
Forced Air Cooling
Trademark
LIK
Transport Package
Strong Wooden Case
Specification
Customized available
Origin
China
HS Code
9032810000
Large Thrust Electrodynamic Horizontal Vertical Shock Vibration Test Machine

Applicable range

Large Thrust Electrodynamic Horizontal Vertical Shock Vibration Test Machine, is widely applied to national defense, weapons, aviation, aerospace, communications, electronics, electrical appliances, transportation, home appliances, etc.

Vibration Test System adopts " double magnetic circuit structure", " self generation skeleton moving coil", "air suspension bearing", "air spring support " linear bearing and roller guide", " ear shaft vibration isolation" and other modern advanced technology and special technology, which can complete respectively three shaft sine vibration test and broadband random vibration test,  
complete the classic (half sine, trapezoid and after peak saw) pulse and shock response spectrum test.




Features
1.The reliability is high, and the rate of fault is low.

2.The stay magnetic field of the vibration generator is little. This stray magnetic field doesn't
    disturb the test sample which are sensitive to magnetic field.

3. Utilizing the computer on line control and inputting data for immediate storage facilitate the
    control  effectiveness and the control curve display.

4. The mass of armature is light. The stiffness of armature is high. The axial resonance
     frequency of armature is over 4000Hz.

5. The various parameters such as vibration frequency, displacement, velocity and acceleration
    can be monitored during the operating.

6. The design of low resistance and high performance is able to enhance the efficiency and
     to lower the cost of testing.

7.The switching power amplifier can make the vibration system output more larger radom
    thrust of root-mean-square value.

8.Large thrust,large displacement, high load, excellent guiding performance, small waveform                    distortion, high speed, complete protection functions etc.


Products image(Large Thrust Electrodynamic Horizontal Vertical Shock Vibration Test Machine)

ISO Large Thrust Electrodynamic Horizontal Vertical Shock Vibration Test Machine




Specifications and technical parameters
ModelLC-300-3LC-600-6LC-1000-15LC-2200-26LC-3200-36LC-4000-40LV-5000-50LV-6000-65
Max. Load (Kg)12030030040050050010001000
Frequency Range (Hz)5-40005-40005-40005-30005-28005-28005-27005-2700
Rated Sine Thrust300kgf600kgf1000kgf2200kgf3400kgf4000kgf5500kgf6400kgf
Rated Random Thrust600kgf1200kgf2000kgf4400kgf6800kgf8000kgf11000kgf12800kgf
Max. Acceleration 
(m/s2)
981981981981981981981981
Max. Speed (m/s)2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 
Max. Displacement 
(MMp-p)
2551515151515151
Model of Vibration 
machine
LC-300LC-600LC-1000LC-2200LC-3200LC-4000LC-5000LC-6000
Weight of moving parts
(kg)
36102227244364
Table diameter (mm)150200240320370370445445
Acceptable eccentric
torque(Nxm)
>196>300>390>500>500>500>1000>1100
Table Dimension
(mm)
840*563
*677
1001*700
*765
1065*753
*880
1189*775
*1081
1339*860
*1160
1339*860
*1160
1605*1124
*1342
1065*1124
*1342
Power Amplifier ModelSA-3SA-6SA-15SA-26SA-36SA-40SA-50SA-65
Max. Output Power3KVA6KVA15KVA20KVA35KVA40KVA55KVA65KVA
Power Amplifier 
Dimension
W*H*D(mm)
550*680
*1445
550*68
0*1445
550*800
*1850
550*800
*1850
550*800
*1850
550*800
*1850
550*800
*2060
550*800
*2070
Power Amplifier 
Weight (kg)
230275420410510620760780
Power Amplifier 
Working Method
Switch
Power Amplifier 
required power
6.5KVA16KVA26KVA40KVA42KVA65KVA90KVA115KVA
Power  AC1 220V /50Hz ;3380V50Hz
Cooling methodForced air Cooling
StandardGB/tT13310-1991, GB2423.10-1995,JJG190-1997,IEC68-2-6, Q/320502SN001-2002



Our Factory

Short introduction about LIK factory:
We are a long history testing equipment manufacturer, in the past 10 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine and battery test equipment. In the research and development of the non-standard dynamic environment chamber, LIK is in the leading position in the industry and we have got more than 30pcs patents. 

LIK main test equipments:
Environmental test chambers, temperature (humidity) chamber,Thermal shock chamber, High low temperature test chamber, Salt spray test chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, Walk in constant temperature and humidity test chamber,Vacuum oven, Drying Cabinet, electrodynamic vibration shaker,mechanical shock tester,environmental combined vibration chamber, Powe battery crush and puncture test machine, Battery shock impact test machine, Battery Squeeze test machine, battery short circuit tester, Battery burning jet test equiopment, Battery  needling test machine, etc

ISO Large Thrust Electrodynamic Horizontal Vertical Shock Vibration Test Machine

ISO Large Thrust Electrodynamic Horizontal Vertical Shock Vibration Test Machine


Our Service

If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. We accept on-site service If customers require.

1. Pre-service
24 Hours online service for your consult. 
Help choose right model, and a series of service, person, advise. Main web site: http://liktest.en.made-in-china.com
1) More than 10 years manufacturer experience in test equipments and with strong research and development team. 
2) Acceptable customization for all kinds of specical specification products.
3) We value the inquiry sent to us timely, ensure quick and competitive offer.
4) We put your order into our tight production schedule,ensure your punctual delivery time.
5) We are a sales team, with more than 10 years experience, more professional and reliable
6) Our professional team could provide the best suggestion as long as you tell us what kind of test you need to do and the                  required specification.
7) Welcome to view our factory at any moment .

2. After sale service
1) We deal with your complains within 24 hours and  solution provide within 3 working days.
2) Trainning how to instal the machine, training how to use the machine. We would offer operation video and English operation           muanual. We can provide video-con.
3) 1 year warranty service and all life maintenancee;  our engineers could go to your place for better service necessarily.
4) All staffs in our company with philosophy of " integrity, dedication, truth-seeking, enterprise", would be dedicated to provide high      quality service and products for you.

3. Commitment: 
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us. 
5. Good Packaging: 
Good Packaging: All goods are covered with film and air bubble film before put them into the strong wooden case.

ISO Large Thrust Electrodynamic Horizontal Vertical Shock Vibration Test Machine

FAQ
Why choose us?

Q1 : Can you customize the product?
A:  Yes, we can customize any products according to requirements.Hot selling lab electronic
      temperature humidity cabinet/Environmental climate test chamber also can be customized.
 
Q2 : How to choose the most suitable products?
A:   Our professional team will give you the best suggestion,just be patiently to tell us the information
       about the parameters your required.

Q3 : Can you arrange installations and commissioning in our lab?
A:  Firstly, for standard chamber we had 3-5 days commissioning before shipping ,
     you just need link power in your lab, then can start to operate.
     Secondly,  we had detailed operation manual with chamber , any problems you can
                      find and solve in it.
     Thirdly,  some of customized chambers we should to install and teach your team to operate .

 
How to Contact Us?

Please Send your inquiry Details in the below Or send to my mail below directly. We promise reply your inquiry on time.