80kv DC Regulated High Voltage DC Power Supply

China 80kv DC Regulated High Voltage DC Power Supply, Find details about China High Voltage Power Supply, High Voltage DC Power Supply from 80kv DC Regulated High Voltage DC Power Supply

Model NO.
CCP-(N/P)6kW-80kV
Voltage Regulating Mode
Frequency Modulation Type
Power Supplying System
Terminal Power Distribution Equipment
Energy Transmission
One-way Transmission
Modulation System
PWM
Brand
Idealtek
Output Voltage
0 ~ 80kv
Output Current
0mA ~ 75mA
Output Polarity
Positive or Negative
Circuit Mode
AC/DC High Frequency Conversion
Working Mode
Constant Voltage / Constant Current
Output Setting
10-Turn Potentiometer
Output Display
LED
Protection
Ocp, Short Circuit and Load Discharging Protecti
Remote Control
0~10V / 4~20mA Analog Signal Control / RS Ports
Chassis
6u / 19-Inch Standard Chassis
Trademark
iDealTeknic
Transport Package
Plywood Case
Specification
IGBT & HF transformer
Origin
China
HS Code
85044019
Model NO.
CCP-(N/P)6kW-80kV
Voltage Regulating Mode
Frequency Modulation Type
Power Supplying System
Terminal Power Distribution Equipment
Energy Transmission
One-way Transmission
Modulation System
PWM
Brand
Idealtek
Output Voltage
0 ~ 80kv
Output Current
0mA ~ 75mA
Output Polarity
Positive or Negative
Circuit Mode
AC/DC High Frequency Conversion
Working Mode
Constant Voltage / Constant Current
Output Setting
10-Turn Potentiometer
Output Display
LED
Protection
Ocp, Short Circuit and Load Discharging Protecti
Remote Control
0~10V / 4~20mA Analog Signal Control / RS Ports
Chassis
6u / 19-Inch Standard Chassis
Trademark
iDealTeknic
Transport Package
Plywood Case
Specification
IGBT & HF transformer
Origin
China
HS Code
85044019
CCP Series High Voltage Capacitor Charging DC Power Supply
Model: CCP-(N/P)6kW-80kV
  1. Power range: 6KW
  2. Voltage range: 0 ~ 80KV
  3. Current range: 0 ~ 75mA
  4. 6U / 19-inch standard chassis
  5. Precise voltage and current setting and measurement capabilities
  6. OCP, short circuit and load discharging protections etc.
80kv DC Regulated High Voltage DC Power Supply
80kv DC Regulated High Voltage DC Power Supply
Overview
The CCP series is high-voltage power supply specially designed for high-voltage capacitors charging application.
The unique constant-current working charging mode and reverse-cutting design & protections of this series of power supply best match the requirements of capacitor charging requirements.
CCP series has two configurations according to the output power: 4U chassis and 6U chassis
The 4U chassis models can achieve a maximum output power of 2KW and a maximum output voltage of 60KV.
The 6U chassis model can achieve a maximum output power of 6KW and a maximum output voltage of 100KV.
This series can meet the charging and testing needs of various capacitors.
It is a best choice for HV laboratory testing, product testing and other HV applications.
Features
  1. Can be used as a HV DC power supply or as HV capacitor charging power supply.
  2. Output voltage adjustable from 0 to 100%
  3. Output power: Average charging @ 3KJ/S and the peak charging power can reach 6KW.
  4. Charging in constant current mode and switch to constant current mode till fully charged.
  5. Unique double isolated system, strong anti-interference ability.
  6. Forced air cooling, very rugged design.
Optional functions
  1. 0 ~ 10V analog signal control (DB50 interface <6U>) (+AC)
  2. RS communication interface (RS232 / RS485 optional) (+RC)
Specifications
InputVoltageThree-phase 380Vac (input tolerance: 10%)
Frequency50Hz/60Hz
CurrentAs per output power.
OutputPeak power6KW
Charging rate3KJ / S
Output voltage adjusting range0 ~ 80KV
Output current adjusting range0A ~ 75mA
Output polarityPositive or Negative (both available)
Client must choose one output polarity before ordering.
Output connectionHV connector and line provided by IdealTek.
Output voltage regulation precision≤0.1%
Output voltage accuracy≤0.1%
Line regulation≤0.5% for no load to full load at output.
Load regulation≤0.5% for ±10% change in input voltage.
Ripple (Vr.m.s.)≤0.5%@ rated output.
Output cableHV connector and line provided by IdealTek.
Efficiency≥90%
Setting & DisplayOutput control mode10-turn potentiometer on front panel.
Display mode41/2 LED digital display
Protection & Monitoring functionsLoad discharging protectionWhen the load has discharging due to insufficient safety distance between load and ground, the power supply shutdown the high voltage output, and then restarts, so cycle like this till the discharging fault is eliminated.
Short circuit protectionWhen a short circuit occurs between the load and the ground, the power supply works in constant current mode, the current is limited to the maximum value, and the voltage drops to 0 to protect the internal inverter from damage.
Over current protectionWhen the users' load exceeds the rated load and cause over-loading, the power supply works in constant current mode, the power supply output current does not change, and output voltage decreases.
Noise≤65dB
Protection degreeIP20
Cooling methodForced air cooling
Working environment conditionsAmbient temperature10ºC~40ºC
Humidity10%~90%(non-condensing)
Height≤2000m
Storage environment conditionsAmbient temperature-20ºC~60ºC
Humidity10%~90%(non-condensing)
Height≤4000m
Size (W*H*D) (mm)19" sub-rack unit with 6U height and 600mm Depth
WeightApprox. 45Kg
Note: every power supply has 48 hours full load burn-in test @ 40ºC
Safety caution
  1. This power supply has HV output, only professional person could operate it.
  2. Please make sure of good grounding before operation.
  3. Capacitor charging power supply has low internal stored energy, please NO no-loading working.
  4. Keep power supply clean and good ventilation.
  5. HV input & output connectors or HV load no touch anything.
Drawings (for reference only)
6U chassis ((2KW<P≤6KW)) (RAL7035)
80kv DC Regulated High Voltage DC Power Supply
80kv DC Regulated High Voltage DC Power Supply
80kv DC Regulated High Voltage DC Power Supply
Remote DB50 port drawing and definition
80kv DC Regulated High Voltage DC Power Supply
HV can be enabled only when JB1 - 3 and JB1 - 4 are closed.
1AGNDAGND
2 Reset/HV Inhibit Normally open, Low = Reset/Inhibit
3 External Interlock +24Vdc @ open, <25mA @ closed
4 External Interlock Return Return for External Interlock
5 mA Test Point 0-10Vdc = 0-100% rated output, Zout= 1Kohm, 1%
6 kV Test Point 0-10Vdc = 0-100% rated output, Zout= 1Kohm, 1%
7 +10Vdc Reference Output +10Vdc @ 1mA
8 mA Program Input 0-10Vdc = 0-100% rated output, Zin>10Mohm
9 Spare 
10 kV Program Input 0-10Vdc = 0-100% rated output, Zin>10Mohm
11 Spare 
12 Reserved 
13 Reserved 
14 Spare 
15 Power Supply Common Power Supply Ground
16 Remote HV On +24Vdc @ open, <25mA @ closed, momentarily
connect to pin 15 enable high voltage
17 Spare 
18 HV On Indicator +24Vdc @ 25mA = HV On
19 Power Supply Common Supply Ground
20 +24Vdc Output +24Vdc @ 100mA, maximum
21 Voltage Mode Status Open Collector, Low = Active
22 Current Mode Status Open Collector, Low = Active
23 Reserved 
24 Interlock Closed Status Open Collector, Low = Active
25 Reserved 
26 Spare 
27 Spare 
28 Reserved 
29 Reserved 
30 Reserved 
31 Reserved 
32 System FaultOpen Collector, Low = Active
33 Reserved 
34 Arc Open Collector, Low = Active
35 Over Temp Fault Open Collector, Low = Active
36 AC Fault Open Collector, Low = Active
37 Spare 
38 Spare 
39 Spare 
40 Spare 
41 Spare 
42 Spare 
43 Spare 
44 +5Vdc Output +5Vdc @ 100mA, maximum
45 +15Vdc Output +15Vdc @ 100mA, maximum
46 -15Vdc Output -15Vdc @ 10mA, maximum
47 RS232 TxN/A for this unit
48 RS232 RxN/A for this unit
49 RS232 GNDN/A for this unit
50 Power Supply Common Power Supply Ground