Products

Juniper SFP-1.25g-Sx Compatible SFP Transceiver Specification Dom LC Mmf Transceiver Module

China Juniper SFP-1.25g-Sx Compatible SFP Transceiver Specification Dom LC Mmf Transceiver Module, Find details about China SFP Module, SFP Transceiver from Juniper SFP-1.25g-Sx Compatible SFP Transceiver Specification Dom LC Mmf Transceiver Module

Model NO.
LAQ2-8855-SR
Trademark
Linksall
Transport Package
Blister Pack
Origin
China
HS Code
8517706000
Model NO.
LAQ2-8855-SR
Trademark
Linksall
Transport Package
Blister Pack
Origin
China
HS Code
8517706000

1.25G 850nm 550m sfp transceiver module

Overview
1.25Gb/s 550m SFP Transceiver
Hot Pluggable, Duplex LC, +3.3V, 850nm, VCSEL, Multi-mode, DDM

Features:                                             
  • Up to 1.25Gb/s Data Links
  • Hot-Pluggable
  • Duplex LC connector
  • Up to 550m on 50/125μm MMF
  • 850nm VCSEL laser transmitter
  • Single +3.3V Power Supply
  • Monitoring Interface Compliant with SFF-8472
  • Maximum Power <1W
  • Industrial /Extended/ Commercialoperating temperaturerange: -40°C to 85°C/-5°C to 85°C/-0°C to 70°C Version available
  • RoHS compliant and Lead Free
Applications:
  • Metro/Access Networks
  • 1.25 Gb/s 1000Base-SX Ethernet
  • 1×Fibre Channel
  • Other Optical Links

Description:
Link-all's LAD24-T85S-SRTransceiver is a high performance, cost effective module which have a duplex LC optics interface. Standard AC coupled CML for high speed signal and LVTTL control and monitor signals.The receiver section usesa PIN receiver and the transmitter usesa 850 nm VCSEL laser, up to 9dB link budge ensure this module 1000Base Ethernet 550m application.
 
    1. Absolute Maximum Ratings
ParameterSymbolMin.TypicalMax.Unit
Storage TemperatureTS-40 +85°C
Supply VoltageVCC-0.5 4V
Relative HumidityRH0 85%
 
    1. Recommended Operating Environment:
ParameterSymbolMin.TypicalMax.Unit
CaseoperatingTemperatureIndustrialTC-40 85°C
Extended-5 85°C
Commercial0 +70°C
Supply VoltageVCC3.135 3.465V
Supply CurrentIcc  300mA
Inrush CurrentIsurge  Icc+30mA
Maximum PowerPmax  1W
 
    1. Electrical Characteristics(TOP = -40 to 85°C, VCC = 3.135 to 3.465 Volts)
ParameterSymbolMin.TypicalMax.UnitNote
Transmitter Section: 
Input differential impedanceRin90100110  
Single ended data input swingVin PP250 1200mVp-p 
Transmit Disable Voltage VDVcc - 1.3 VccV2
Transmit Enable Voltage VENVee Vee+ 0.8V 
Transmit Disable Assert TimeTdessert  10us 
Receiver Section: 
Single ended data output swingVout,pp250 800mv3
LOS FaultVlosfaultVcc - 0.5 VCC_hostV5
LOS NormalVlos normVee Vee+0.5V5
Power Supply RejectionPSR100  mVpp6
        
Note:
  1. AC coupled.
  2. Or open circuit.
  3. Into 100 ohm differential termination.
  4. 20 - 80 %
  5. LOS is LVTTL. Logic 0 indicates normal operation; logic 1 indicates no signal detected.
  6. All transceiver specifications are compliant with a power supply sinusoidal modulation of 20 Hz to 1.5MHz up to specified value applied through the power supply filtering network shown on page 23 of the Small Form-factor Pluggable (SFP) Transceiver Multi-Source Agreement (MSA), September 14, 2000.
 
    1. Optical Parameters(TOP = -40 to 85°C, VCC = 3.135 to 3.465 Volts)
ParameterSymbolMin.TypicalMax.UnitNote
Transmitter Section:
Center Wavelengthλc840850860nm 
Spectral Width(RMS)σRMS  0.85nm 
Optical Output PowerPout-9 -3dBm1
Extinction RatioER8.2  dB 
Optical Rise/Fall Timetr / tf  260ps2
Relative Intensity NoiseRIN  -120dB/Hz 
Output Eye MaskCompliant with  IEEE802.3 z (class 1 laser safety) 
Receiver Section: 
Optical Input Wavelengthλc770 860nm 
Receiver OverloadPol0  dBm4
RX SensitivitySen  -18dBm4
RX_LOS Assert LOS A-29  dBm 
RX_LOS De-assert LOS D  -19dBm 
RX_LOS HysteresisLOS H0.5  dB 
General Specifications:
Data RateBR 1.25 Gb/s 
Bit Error RateBER  10-12  
Max. Supported Link Length on 50/125μm MMF@1.25Gb/sLMAX 550 m 
Total System BudgetLB8  dB 
Note
  1. The optical power is launched into MMF.
  2. 20-80%.
  3. Jitter measurements taken using Agilent OMNIBERT 718 in accordance with GR-253.
  4. Measured with PRBS 27-1 at 10-12 BER
 
    1. Pin Assignment
Diagram of Host Board Connector Block Pin Numbers and Name

Diagram of Host Board Connector Block Pin Numbers and Names
 
    1. Pin Function Definitions
Pin NoNameFunctionPlug SeqNotes
1VeeTTransmitter Ground11
2TX FaultTransmitter Fault Indication3 
3TX DisableTransmitter Disable32
4MOD-DEF2Module Definition23
5MOD-DEF1Module Definition 133
6MOD-DEF0Module Definition 033
7Rate SelectNot Connected34
8LOSLoss of Signal35
9VeeRReceiver Ground 11
10VeeRReceiver Ground 11
11VeeRReceiver Ground  1
12RD-Inv. Received Data Out36
13RD+Received Data Out36
14VeeRReceiver Ground 31
15VccRReceiver Power21
16VccTTransmitter Power2 
17VeeTTransmitter Ground1 
18TD+Transmit Data In36
19TD-Inv. Transmit In36
20VeeTTransmitter Ground1 
Notes:
  1. Circuit ground is internally isolated from chassis ground.
  2. Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
  3. Should be pulled up with 4.7k - 10 kohms on host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls line low to indicate module is plugged in.
  4. Rate select is not used
  5. LOS is open collector output. Should be pulled up with 4.7k - 10 kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
  6. AC Coupled
 
    1. SFPModuleEEPROM Information and Management
The SFP modules implement the 2-wire serial communication protocol as defined in the SFP-8472. The serial ID information of the SFP modules and Digital Diagnostic Monitor parameters can be accessed through the I2C interface at address A0h and A2h. The memory is mapped in Table 1. Detailed ID information (A0h) is listed in Table 2. And the DDM specificationat address A2h. For more details of the memory map and byte definitions, please refer to the SFF-8472, "Digital Diagnostic Monitoring Interface for Optical Transceivers". The DDM parameters have been internally calibrated.

Table 1. Digital Diagnostic Memory Map (Specific Data Field Descriptions)



Table 2 - EEPROM Serial ID Memory Contents (A0h)
Data AddressLength
(Byte)		Name of
Length		Description and Contents
Base ID Fields
01IdentifierType of Serial transceiver (03h=SFP)
11ReservedExtended identifier of type serial transceiver (04h)
21ConnectorCode of optical connector type (07=LC)
3-108Transceiver 
111EncodingNRZ(03h)
121BR, NominalNominal baud rate, unit of 100Mbps
13-142Reserved(0000h)
151Length(9um)Link length supported for 9/125um fiber, units of 100m
161Length(50um)Link length supported for 50/125um fiber, units of 10m
171Length(62.5um)Link length supported for 62.5/125um fiber, units of 10m
181Length(Copper)Link length supported for copper, units of meters
191Reserved 
20-3516Vendor NameSFP vendor name: LINK-ALL
361Reserved 
37-393Vendor OUISFP transceiver vendor OUI ID
40-5516Vendor PNPart Number: "LAD24-T85S-SR" (ASCII)
56-594Vendor revRevision level for part number
60-623Reserved 
631CCIDLeast significant byte of sum of data in address 0-62
Extended ID Fields
64-652OptionIndicates which optical SFP signals are implemented
(001Ah =LOS, TX_FAULT, TX_DISABLE all supported)
661BR, maxUpper bit rate margin, units of %
671BR, minLower bit rate margin, units of %
68-8316Vendor SNSerial number (ASCII)
84-918Date codeLINK-ALL's Manufacturing date code
92-943Reserved 
951CCEXCheck code for the extended ID Fields (addresses 64 to 94)
Vendor Specific ID Fields
96-12732ReadableLINK-ALL specific date, read only
128-255128ReservedReserved for SFF-8079
      
 
    1. Digital Diagnostic Monitor Characteristics
Data AddressParameterAccuracyUnit
96-97Transceiver Internal Temperature±3.0°C
100-101Laser Bias Current ±10%
100-101Tx Output Power ±3.0dBm
100-101Rx Input Power±3.0dBm
100-101VCC3 Internal Supply Voltage±3.0%
 
    1. Regulatory Compliance
The LAD24-T85S-SR complies with international Electromagnetic Compatibility (EMC) and international safety requirements and standards (see details in Table following).
 
Electrostatic Discharge
(ESD) to the Electrical Pins		MIL-STD-883E
Method 3015.7		Class 1(>1000 V)
Electrostatic Discharge (ESD)
to the Duplex LC Receptacle		IEC 61000-4-2
GR-1089-CORE		Compatible with standards
Electromagnetic
Interference (EMI)		FCC Part 15 Class B
EN55022 Class B (CISPR 22B)
VCCI Class B		Compatible with standards
Laser Eye SafetyFDA 21CFR 1040.10 and 1040.11
EN60950, EN (IEC) 60825-1,2		Compatible with Class 1 laser
product.


Juniper SFP-1.25g-Sx Compatible SFP Transceiver Specification Dom LC Mmf Transceiver ModuleJuniper SFP-1.25g-Sx Compatible SFP Transceiver Specification Dom LC Mmf Transceiver Module
Juniper SFP-1.25g-Sx Compatible SFP Transceiver Specification Dom LC Mmf Transceiver ModuleJuniper SFP-1.25g-Sx Compatible SFP Transceiver Specification Dom LC Mmf Transceiver ModuleJuniper SFP-1.25g-Sx Compatible SFP Transceiver Specification Dom LC Mmf Transceiver Module

You Might Also Like