Products

Bsmj Self-Healing Shunt Power Capacitor

China Bsmj Self-Healing Shunt Power Capacitor, Find details about China Self-Healing Shunt Capacitor, Shunt Capacitor from Bsmj Self-Healing Shunt Power Capacitor

Model NO.
Bsmj Self-Healing Shunt Power Capacitor
Electrolyte
Inorganic Medium
Usage
Low Frequency Coupling, High Frequency Coupling, Tuning, Filter, Low Frequency Bypass, High Frequency Bypass
Tuning
Polystyrene Capacitor
Filter
Aluminum Electrolytic Capacitor
Trademark
Jingcheng
Transport Package
Wooden Box
Specification
250/280/300/480/525/690/750/1050VAC
Origin
Hangzhou
HS Code
853225900
Model NO.
Bsmj Self-Healing Shunt Power Capacitor
Electrolyte
Inorganic Medium
Usage
Low Frequency Coupling, High Frequency Coupling, Tuning, Filter, Low Frequency Bypass, High Frequency Bypass
Tuning
Polystyrene Capacitor
Filter
Aluminum Electrolytic Capacitor
Trademark
Jingcheng
Transport Package
Wooden Box
Specification
250/280/300/480/525/690/750/1050VAC
Origin
Hangzhou
HS Code
853225900
Introduction
1. the guidebook is applied for our BKMJ series metallized shunt capacitor.
2. BKMJ series capacitor is applied for the A.C. power net under 2KV with 50/60Hz power
frequency in order to increase the power factor. The product is conformed with IEC831-1 and IEC831-2 and GB12747 Self-healing L.V. Shunt Capacitor
3. The meaning of product type is as following:
Character:
The series capacitor made of the polypropylene film dielectric , Ag-Zn metallized plating layer with the thick metal layer on edge, which make the products with the character of good self-healing and good capacitance stability ,special spraying method which make the product with good resistance of surge, special impregnate craft make the capacitor with not only the dry-type structure but also oil impregnate advantage , indoor filled with vermiculite to protection the capacitor, indoor discharge resistance , small volume,light weight,low loss,without explosion and burning,without oil,without pollution,safe and stable.
Basic parameter and technical condition
1. rated voltage : 0.23~2kv
rated capacitance: 3~120kvar
rated frequency : 50Hz/60Hz
phase Number: three/one
Bsmj Self-Healing Shunt Power Capacitor
2. voltage experiment
voltage between terminals : under rate frequency 2.15Un, 10s
voltage between terminal and outer shell: power frequency A.C. 3kv 10s or 3.6kv 2s
3. capacitance deviation: deviation between the real capacitance and rated capacitance is not over 0~+10%, the rate between the max capacitance and min capacitance of terminal phase is not over 1.08
4. tangent of loss angel: <0.5w/kvar
5. The surplus voltage of capacitor terminal should be decreased under 50v in 1~3minutes when the capacitor has been separated form the power net.
6. The capacitor should be installed on the environment temperature of -25ºC~+50ºC
Opposite degree of humidity less than 85%, Elevation high degree less than 2000m
Indoor or outdoor.7. permitting over-load
7.1 permitting over voltage :8 hours per 24 hours under 1.1Un
7.2 permitting over current: persistent operation under 1.3In
7.3 max over-load: safe operation under 1.35Qn
Bsmj Self-Healing Shunt Power Capacitor
Shipping and Storage
1. The capacitor should be shipped with productive work package and be carried
carefully.
2. The capacitor should be stored in the room of dry and without corrosive gas.
User acceptance and test
1. the user should check whether the product is conform with the nameplate or not.
2. capacitance test: according the nameplate , test the capacitance of product.
3. withstand voltage test: according to 75 percent of the ex-work experimental voltage.
4. test of tangent of loss tangle: according to the standard
 
Installment and operation regulation:
1. the capacitor should be installed by the requirement condition. At the same time the direct sunshine should be avoided, without corrosive gas and explosion, well ventilated .
2. the distance between capacitor and wall isn't less than 25mm.
3. The voltage rising from the capacitor should be considered before the capacitor installed to prevent the capacitor long-term operating under the over voltage.
4. On the condition that the capacitor is connected with respond electric motor, the capacitor current should be less than 90% of the motor rated current.
5. When the capacitor should be put into and separated many times , the surplus voltage of capacitor should be less than 10% of rated voltage before the capacitor is put into the power net.
6. The capacitor should not permitted to operate on the condition that the working current is over 1.3 rated current. The system respond wave should be considered when the capacitor is installed.
7. The capacitor terminal and ground terminal should be connected with insulation soft copper well. The insulation Gum coil should be installed in order to preventing the insulation skin of inductive wire from being cut.
8. The cable should be chosen according to the capacitance of device.
The choose of switch and protective device
Bsmj Self-Healing Shunt Power Capacitor
1. The switch and protective device should be burdened the 1.3×1.1In for a long
period.
2. The switch and protective device should be burdened electric power and hot ambient
environment which come from the on-off operation of capacitor.
3. The over current protective device should be adopted in order to prevent the over current which surpass the allowed areas by the way the operation of switch.

You Might Also Like