20L Hydarulic Lifting Type Vacuum Homogeneous Emulsifier Machine

China 20L Hydarulic Lifting Type Vacuum Homogeneous Emulsifier Machine, Find details about China Homogenizer Emulsifier Mixer, 20L Vacuum Emulsifying Machine from 20L Hydarulic Lifting Type Vacuum Homogeneous Emulsifier Machine

Basic Info.

Model NO.

ZT-lower homogenizer

Layout Type

Verticle

Mixing Drum Shape

Disc

Additional Capabilities

Milling

Operating type

Continuous Operating

Condition

New

Model

10L

Power

7.5kw

Material

Stainless Steel

Heating Method

Electric Heating

Thickness

4mm

MOQ

1set

Polish

300 Mesh

Jacket

Double

Quality

Excellent

Control

Button Control Panel

Trademark

ZHITONG

Transport Package

Ply Wood Case

Specification

Stainless steel

Origin

Guangzhou

HS Code

8479820090

Model NO.

ZT-lower homogenizer

Layout Type

Verticle

Mixing Drum Shape

Disc

Additional Capabilities

Milling

Operating type

Continuous Operating

Condition

New

Model

10L

Power

7.5kw

Material

Stainless Steel

Heating Method

Electric Heating

Thickness

4mm

MOQ

1set

Polish

300 Mesh

Jacket

Double

Quality

Excellent

Control

Button Control Panel

Trademark

ZHITONG

Transport Package

Ply Wood Case

Specification

Stainless steel

Origin

Guangzhou

HS Code

8479820090

Product Desciption

20L Hydarulic Lifting Type Vacuum Homogeneous Emulsifier Machine

ZT-D-20L vacuum homogeneous emulsifier(hydraulic lift type)

Design principles:
Under the action of the high-speed emulsifying head, the raw material will be attracted to pass through the narrow gap in the center of the emulsified head, and at the same time a strong circulating water flow will be formed in the pot, and the positive and negative effects of the center wing and the outer slow stirring wing will be added. Produce strong shearing force, impact force and dispersion, make raw material obtain sufficient crushing, mixing, emulsifying and homogenizing, effectively increase product stability.
The high speed emulsifying head and the design of slow mixing wing not only can achieve high efficiency mixing effect, but also make the product homogenized, the raw material is completely mixed, and there is no stirring dead angle. The stirring wing device has a blade made of polytetrafluoroethylene, which can adjust the angle with the rotation of the stirring wing, and can scrape off the products attached to the inner wall and bottom. This action can avoid overheating or under cooling of the wall of the pot, and achieve faster heat exchange effect, balance the product temperature and shorten the manufacturing time.

Product advantages:

The upper part of the machine is a frame-type scraping stirring, the upper head and oar can be lifted, and the bottom is an internal and external circulation emulsifying device.
The better effect can be obtained by mixing the upper part with multiple wings and mixing the material with sufficient emulsification and stirring.
At the same time, because of the bottom type emulsifying device, the function is more extensive, the bottom homogenization head is short from the bottom of the pot, and the emulsifying convection impact force is strong, the product can be quickly particulate and achieve better glossiness.
Because the direction of emulsified convection is from top to bottom, it is not easy to produce bubbles.
If the oil phase of the product is less, the mixing effect can be played more, and the emulsifying time will be shortened, which will make the product structure more stable.
When using such equipment, large quantities of production can be produced without the limitation of up to 1/3 capacity.

ZT-D-20L hydraulic lift vacuum homogeneous emulsifier configuration, parameters
	Main pot	Work volume 20L; Total volume 24L	ZHITONG	Internal and external polishing 300 U or more
1	Internal pot(GMP standard Total)	Tube: Material SUS316L, Thick: 4mm Cover: Material SUS316L, Thick: 4mm Internal boiler steam sterilization	ZHITONG	Double side welding of head and pot Catch, Polish and throw light;
2	Jacket	Material SUS304, 4mm thick Covering electric heating, heating rod power: 1.5 KW, pressure ≤ 0.2 Mpa, connecting water, but, into the upper row	ZHITONG	Factory pressure vessel standard test pressure
3	outsource	Cylinder SUS304 thk: 3mm Cover material SUS 304 thk: 3mm	ZHITONG	R arc transition welding of middle and outer cladding
4	pot cover	The overall head of the upper cover is lifted, sealed, Cover: Material SUS316L vacuum electrical contact pressure gauge,(hydraulic pressure can not be raised in vacuum) suction filter, release port, air pump inlet(with breathing apparatus), mirror lamp, spice funnel. Assembly of fast suction pipes for feed filtration	ZHITONG	Access to all parts of material GMP Health Class Stainless Steel
5	Mixing paddle, shaft scraper	Stir the blades with a shaven frame and bottom Tablet, stainless steel, scraper: PTFE A board, white	ZHITONG	Flange coupling connection
6	Stir motor	Stirred motor power: Grade 4 0.37 kW domestic The best reducer: Guomao brand 1:23	Germany
			Japan
		Speed: 0-63 rmin, Panasonic inverter
7	Mixing mechanical seal	1 set of mechanical seals using Borgman		Jiasheng.
8	Lower assembly homogenizer	Motor power: 1.1 kW speed: 0-2850 rpm, Panasonic inverter, wire cutting double shear homogenizer	Germany
			Japan
9	Mechanical seal	Adopt Borger type four-sided all-gold mechanical seal(water cycle cooling, cooling synchronizes with homogenizer)		Jiasheng.
10	Outlet Valve	Top bottom valve, plate and bottom of pan	ZHITONG	GMPSFI standard
11	Temperature Display	Thermoresistor thermometer(less than or equal to 140 degrees)	Japan
	Water pan	Total volume: 16L
1	Inner pot(sanitary level Total)	Tube: Material SUS316L, Thick: 3mm	ZHITONG	Double side welding of head and pot Catch, Polish and shine.
		Bottom inner cover: SUS316L, Thick: 3mm
		Covered cover head: material SUS 304, thickness: 3mm
		One half of the lid can be opened, easy to feed
		Boiler with guide board for uniform material
2	Jacket	Material SUS 304, Thick: 3mm		Factory pressure vessel standard test pressure
		Clamping electric heating, pressure ≤ 0.2 Mpa
3	outsource	Material SUS 304, wall thickness: 2mm	ZHITONG	R arc transition welding of middle and outer cladding
4	stirring	Wave wheel stirring	ZHITONG	Flange coupling connection
5	Stir motor	Motor power: 180W, speed: 1440RPM	Germany
6	Mechanical seal	Mechanical seal of Borgmann style		Jiasheng.
7	Sewage discharge valve	Stainless steel double plate ball valve, sanitary level fast open connection, oil phase and water phase drain pipe connection Attach one end to discharge	ZHITONG
8	Temperature Display	Thermoresistor thermometer(less than or equal to 140 degrees)	Japan
	Oil pan	Total volume: 10L
1	Inner pot	Tube: Material SUS316L, Thick: 3mm	ZHITONG	Double side welding of head and pot Catch, Polish and shine.
		Bottom inner cover: SUS316L, Thick: 3mm
		Covered cover head: material SUS 304, thickness: 3mm
		One half of the lid can be opened, easy to feed
		Boiler with guide board for uniform material
2	Jacket	Material SUS 304, Thick: 3mm		Factory pressure vessel standard test pressure
		Clamping electric heating, pressure ≤ 0.2 Mpa
3	outsource	Material SUS 304, wall thickness: 2mm	ZHITONG	R arc transition welding of middle and outer cladding
4	stirring	Wave wheel stirring	ZHITONG	Flange coupling connection
5	Stir motor	Motor power: 180W, speed: 1440RPM	Germany
6	Mechanical seal	Mechanical seal of Borgmann style		Jiasheng.
7	Sewage discharge valve	Stainless steel double plate ball valve, sanitary level fast open connection, oil phase and water phase drain pipe connection Attach one end to discharge	ZHITONG
8	Temperature Display	Thermoresistor thermometer(less than or equal to 140 degrees)	Japan
	Electric control cabinet	PLC& HMI Integrated System	Import
	Lift system	Hydraulic lifting method: power 0.55 KW, blade pump, Standard for solenoid valve, overflow valve, one-way valve, etc.. Standard Configuration for Home, Limit Switches, etc..	ZHITONG
	Dumping system	Manual shake, the pot is tilted 90 degrees to the ground.	ZHITONG