Main product: Solder Reflow, SMT Stencil Printer, Semi-Automatic Printing, PCB Printer, screen printing, , SMT screen printer, SMT printer, Solder Paste Printer, SMT solder paste stencil printer, SMT printer machine, stencil printer, Solder reflow machine
Introduce:
Lead-free hot air reflow oven ETA E8
Ø High-end reflow oven in China
Heating System
> Eight groups of top and bottom forced hot air convection heating zones.
> Patented heating plates in each zone uniformly transfer heat to the PCBs using forced hot air convection.
> Independent temperature control in each zone to ensure temperature uniformity within the process tunnel.
> Power consumption savings of 1/3 as compared to other systems.
> Patented motorized blower in each zone is designed to ensure stable air pressure, withstand high process temperature and is disturbance-free.
> Audible and light tower alarm for temperature limits, PCB drop, PCB jam and blower malfunction.
> Fast start-up (within 20 minutes) from room temperature to work temperature due to the high efficiency of the motorized heating plates.
Cooling System
> Two (2) groups of forced air convection cooling zones.
Distortion-free Conveyor System with Automated Chain Lubrication
> Combined pin chain rail and mesh belt conveyor system (Note: Mesh belt is not available on machines with center board support. )
> Closed-loop computer control of the conveyor provides a precise and repeatable reflow process.
> Automated chain lubrication system with a computer controlled central reservoir. Lubricant is added directly to the conveyor brush eliminating operator interface for this maintenance.
Fresh Air Recharge System
> Fresh air is supplied to each zone uniformly to provide a rapid process transfer.
Flux Management System
> Air amplifier forces supercharged flux collection and recirculation.
> Flux exhaust chimney with drawer shaped filter net is easy to access for maintenance.
Control System
> PC control system with windows based control software.
Additional Features
> Integrated UPS will be automatically activated in case of main power failure and will keep control PC and conveyor running for minimum 8 minutes to send out PCBs inside the oven tunnel.
> Motorized hood lift allows easy access to the inside of the oven for service and maintenance.
> Five (5) profiling ports and integrated profiling software are designed for convenient temperature profiling.
> Swing arm control PC station
> Four (4) emergency stop switches
> Two (2) exhaust ports
> SMEMA interface
> System documentation
| Model | E8 |
| GENERAL |
| Outside dimension | 5140x1300x1580mm |
| Standard color | Computer grey |
| Weight | 1800kg |
| Number of heating zones | Up8/bottm8 |
| Lengthof heating zones | 2900mm |
| Number of cooling zones | 2(built-in) |
| Exhaust volume | 10M3/minx2 Exhausts |
| Standard feature of control system |
| Electric supply required | 3phase, 380V 50/60Hz |
| Electric power required | 64KW |
| Power for warm up | 32KW |
| Power consumption | 10KW |
| Heating pattern | Up& Bottom Hot air |
| Warming time | Approx. 30minute |
| Temp. setting range | Room temp__300degree |
| Control system | PLC+ Computer |
| Temperature control method | PID close loop control +SSR driving |
| Temperature control precision | ± 1.0degree |
| Temperature deviation on PCB | ± 1.0degree |
| Data storage | Process data and status storage (80GB) |
| Abnormal alarm | Abnormal temperature(extra-high/extra-low temp) |
| Board dropped alarm | Tower light: yellow warming: Green-normal: Red-abnormal |
| Standard features of conveyor system |
| Max. width of PCB | Max: 450mm(Standard) |
| Rail Number | 1 Lane(standard) |
| Components clearance | Top/bottom clearance of PCB is 25mm |
| Conveyor height | Light → right(option: R→ L) |
| PCB transmission agent | Air-reflow=chain +mesh (Standard) |
| Conveyor height | 900/± 20mm |
| Conveyor speed range | 300~2000mm/min |
| |