Products

Bench Laboratory Programmable DC Power Supply 100V 10A

China Bench Laboratory Programmable DC Power Supply 100V 10A, Find details about China DC Power Supply, DC Power Supplies from Bench Laboratory Programmable DC Power Supply 100V 10A

Model NO.
CSP10H10
Voltage Regulating Mode
Width Modulation Type
Power Supplying System
Terminal Power Distribution Equipment
Energy Transmission
One-way Transmission
Modulation System
PWM
Brand
Idealtek
Output Voltage
0~100.00V
Output Current
0~10.00A
Circuit Mode
Full-Bridge Phase-Shifting Soft Switch PWM Regulat
Working Mode
Constant Voltage / Constant Current
Output Setting
Silica Gel Buttons & Stepless Knobs
Display Mode
2.55-Inch LCD Display
Remote Control
RS485 Communication Interface
Protection
Ovp, Ocp, Otp
Cooling Method
Forced-Air Cooling
Color
Ral 7035
Application
Component or Device Burn-in Test, Routing Test
Trademark
iDealTeknic
Transport Package
Plywood Case
Specification
IGBT & HF transformer
Origin
China
HS Code
8504401990
Model NO.
CSP10H10
Voltage Regulating Mode
Width Modulation Type
Power Supplying System
Terminal Power Distribution Equipment
Energy Transmission
One-way Transmission
Modulation System
PWM
Brand
Idealtek
Output Voltage
0~100.00V
Output Current
0~10.00A
Circuit Mode
Full-Bridge Phase-Shifting Soft Switch PWM Regulat
Working Mode
Constant Voltage / Constant Current
Output Setting
Silica Gel Buttons & Stepless Knobs
Display Mode
2.55-Inch LCD Display
Remote Control
RS485 Communication Interface
Protection
Ovp, Ocp, Otp
Cooling Method
Forced-Air Cooling
Color
Ral 7035
Application
Component or Device Burn-in Test, Routing Test
Trademark
iDealTeknic
Transport Package
Plywood Case
Specification
IGBT & HF transformer
Origin
China
HS Code
8504401990
CSP20H05 Series Programmable DC Power Supply
  1. Rated power range: 1KW
  2. Rated voltage range: 0 ~ 200V 
  3. 5 - digit voltage display voltage and 4 - digit current display, with a maximum resolution of 1mV and 1mA.
  4. High programming accuracy, high output accuracy, and low ripple noise.
  5. Excellent dynamic response time <10ms.
  6. Output start - up without overshoot, and can set the rising slope of voltage and current.
  7. Real-time power display.
  8. RS232 / RS485 communication interface.
Bench Laboratory Programmable DC Power Supply 100V 10A
Overview
CSP20H05 is a single-phase 220Vac input desktop programmable DC power supply with designed output power at 1KW, the output rated voltage levels at 200Vdc, mature IGBT high frequency switching power topology design and digital control loop give the 1KW programmable DC power supply high precision, high stability, low ripple and fast response speed DC output features.

The design of the 1KW programmable power supply is small and compact for portable moving. The power supply front panel adopts silica gel buttons, a stepless knob and a 2.55-inch LCD display. The output voltage, current, start / stop time, output rising rate, OVP, OCP and other parameter setting programming and reading of the Programmable Power Supplies can be easily and quickly completed through the front panel man-machine interface.
The programmable DC power supplies are also equipped with a standard RS485 communication interface, following the MODBUS-RTU international protocol, which can realize remote control programming of the power supply.
It is an excellent choice for laboratory programmable DC power supply, and can also be used for instrument calibration and various Desktop DC test application.
Features
  1. The power supply chassis is produced using laser technology, with unique color matching and excellent baking paint production technology, which gives the power supply generous and elegant appearance.
  2. The internal circuit boards of power products all produced by PCBA and DIP process, to reduce human faults. The production adopts process inspection for each step, which reduces the defective assembly rate and further improves product reliability.
  3. Firm and reliable internal structure design and high-quality packaging reduce the probability of damage that may be caused by transportation.
  4. The power supply adopts LCD display, preset voltage / current values, output voltage / current values, real-time power, local / remote working mode & start / stop status are all displayed on LCD interface, which is convenient for customers to control & monitor the status of DC power supply.
  5. High display accuracy: 0.1% voltage display accuracy in CV mode, 5 digits voltage display with minimum 1mV resolution; 0.2% current display accuracy in CC mode, 4 digits current display with minimum 1mA resolution.
  6. The power supply can be used as a constant current source for its low output current ripple while ensuring low voltage ripple.
  7. The power supply voltage and current have almost no starting impact, and the power output dynamic response time is excellent
  8. With output programming function, you can edit step waveforms, pulse waveforms, etc., and the rising slope of the voltage and current.
Block diagram
Bench Laboratory Programmable DC Power Supply 100V 10A
Applications
  1. LED and energy-saving lamps aging test.
  2. Switching power supply and power adapter aging test.
  3. Photovoltaic inverter aging test.
  4. Aerospace and national defense industry.
  5. Testing and aging of electric vehicle motors, controllers, and DC motors
  6. Capacitors, resistors, relays, transistors, sensors and other electronic devices.
  7. Electrolytic, electroplating, and corroded aluminum foil processing.
  8. LCD, touch screen test.
  9. Automotive electronics, DC motor, motor controller, cigarette lighter, audio and video burn-in test.
Featured functions
Programming function
The power supply has output programmable function for 10 groups of different parameters and the number of cycles. Such as initial voltage/current value, final voltage/current value, hold time and other parameters setting. And, it can realize multi-step continuous output, single-step output and cyclic output functions. Different modes such as voltage step and voltage sequence can also be realized.
Bench Laboratory Programmable DC Power Supply 100V 10A
Excellent dynamic response speed
Bench Laboratory Programmable DC Power Supply 100V 10A
No overshoot at output start-up & Settable output voltage and current rising slope
Bench Laboratory Programmable DC Power Supply 100V 10A
Ultra-high output display accuracy
Bench Laboratory Programmable DC Power Supply 100V 10A
Comprehensive information LCD display
Preset voltage/current value; output voltage/current value; real time power; local/remote control working mode; power supply start/stop status information can be displayed in the LCD on the power supply front panel at the same time, which is convenient for customers to monitor the status of the DC power supply.
Bench Laboratory Programmable DC Power Supply 100V 10A
Bench Laboratory Programmable DC Power Supply 100V 10A
Specifications
InputPhaseSingle - phase
Voltage220Vac±10%
Frequency50Hz/60Hz
Power factor>0.92
OutputDC VoltageAccuracy<0.2% of rated value (CV mode)
Load regulation
(0 ~ 100% load variance)		<0.05% of rated value
Line regulation
(±10%△UAC)		<0.05% of rated value
Regulation time
(10% ~ 100% load variance)		<10ms
Rise time from 10% to 90% loading<50ms ~ 10s
DC CurrentAccuracy<0.3% of rated value (CC mode)
Load regulation
(1% ~ 100% load variance)		<0.15% of rated value
Line regulation
(±10%△UAC)		<0.05% of rated value
DC PowerAccuracy<0.5% of rated value
Isolation withstand voltageAC Input to Shell1500VDC
AC Input to Output1500VDC
DC Output to Shell500VDC
Protection functionsOutput voltage - limiting protection, output current - limiting protection, output power - limiting protection and over temperature protection
Communication portRS232 or RS485
In line with MODBUS-RTU standard.
Cooling methodForced air cooling
Working temperature-5ºC ~ 45ºC
Storage temperature-20ºC ~ 60ºC
Relative humidity<80%(non-condensing)
Size (W*H*D) (mm)210*88*350
WeightApprox. 6Kg
Power Supply Front and Rear Panels Description
Front panel description
Bench Laboratory Programmable DC Power Supply 100V 10A
Key button identificationKey button description
CVSwith to power supply output voltage value setting
CCSwith to power supply output current value setting
L/RLocal / Remote control switching
0~9Number key buttons
CReturn key button
OKEnter key button
ON/OFFPower supply output ON / OFF control
Rear panel description
Bench Laboratory Programmable DC Power Supply 100V 10A
No.Description
1DC output terminal, red is positive pole and black is negative pole
The output terminal can be connected in three ways:
  1. Wiring with copper nose
  2. Insert directly from the side holes (limited to less than 10A)
  3. Insert directly from the back holes (limited to less than 10A)
2The cooling fan air duct, NO blocking!
3RS485 / RS232 communication interface
4AC power connection terminal, make sure of well grounding.
Power Supply Chassis Drawing
Bench Laboratory Programmable DC Power Supply 100V 10A
Bench Laboratory Programmable DC Power Supply 100V 10A
Standard model list
ModelCSP3030CSP6015CSP10H10CSP20H05CSP30H03
Rated power900W1000W900W
Rated voltage30.000V60.000V100.00V200.00V300.00V
Rated current30.00A15.00A10.00A5.000A3.000A
Voltage RippleVrms<0.3%Vrms<0.3%Vrms<0.3%Vrms<0.3%Vrms<0.3%
Installation environment
  1. Ambient temperature: Please have the power source working in safe temperature range (0ºC ~ 45ºC) or it would affect life of power source.
  2. Please install the power source at least 50cm distant from surroundings to have better ventilation.
  3. Please install the power source away from vibration (less than 0.6G), especially equipment like puncher.
  4. Keep the power source away from direct sunshine, humidity or place with water globule.
  5. Keep the power source from corrosive, flammable & explosive gas.
  6. Keep the power source away from oil stain, dust & metallic dust.
 
 
 

You Might Also Like