CMYK Printing RFID PVC Membership Card with Golden Laser Stamping The contactless smart card, in which the card communicates with and is powered by the reader through RF induction technology (at data rates of 106-848 kbit/s). These cards require only proximity to an antenna to communicate. Like smart cards with contacts, contactless cards do not have an internal power source. Instead, they use an inductor to capture some of the incident radio-frequency interrogation signal,rectifyit, and use it to power the card's electronics. APDU transmission via a contactless interface is defined in ISO/IEC 14443-4.
Common NFC cards offered by Cardzgroup include:NTAG213: Replacement for NTAG203 - NFC Forum Type 2 tag with 180byte memory. Cost effective and excellent read range, can encode up to 132 total characters.
NTAG215: Limited availability NFC Forum Type 2 tag with 540byte memory. Good read range and can encode up to 492 total characters.
NTAG216: Higher priced NFC Forum Type 2 tag with 924byte memory. Good read range and can encode up to 854 total characters.
Topaz 512: NFC Forum Type 2 tag with 512byte memory. Good read range and can encode up to 449 total characters.
MF Ultralight: NFC Forum Type 2 tag with 64byte memory. Cost effective with good read range and can encode up to 41 total characters.
MF Ultralight C: NFC Forum Type 2 tag with 192byte memory and encryption. High price with low read range and can encode up to 132 total characters.
Product type | CR80 PVC Membership Card |
Material | PVC |
Size | 85*54*0.76mm |
Thickness | 0.76mm, or on demand |
Magnetic stripe | Hi-Co Magnetic Stripe:2750 OE, Lo-Co Magnetic Stripe:300 OE; Golden, Silver, Black, et c. |
Color | CMYK printing on both sides |
Overlay | Laminate on card body to protect print ink |
Surface finish | Glossy,Frosted,Matt,UV ink |
Remark | can be with hole punching |
Design format | PDF/AI/CDR/PSD/EPS/INDD outlined format |
Available Crafts: Silk-screen printing
Laser gold hot-stamping, Laser silver hot-stamping
Gold/ Silver printing
Embossing number
Glossy/ matte/ frosted finish
Logo printing
Hole punching
Signature panel
Hi-co/ Lo-co magnetic strip
Printing individual number
UV embossing number
Barcode
Full color offset printing
Order Process:To reach agreement on prices and terms;
Send us artworks at AI, PSD, PDF, CDR etc;
We output production format picture for final confirmation;
After deposit received, then will arrange production;
Products finished, send you photos for check;
Balance arranged, goods will be shipped out;
Goods arrived, please send feedback of your testing report to us.