Description of Cement mortar spraying machine|automatic|wet

Cement mortar spraying machine are efficient machines and mechanized using superior raw components. These light weight machines are highly sustainable and require low maintenance. These machines are very easy to operate and are supplied to various clients at the leading market price range.

Automatic Mortar Spray Machines are mainly used for building interior and exterior walls, cement mortar spraying and external wall insulation mortar spraying, refractory spraying. The Automatic Mortar Spray Machine produced by our company basically has no floor ash, water saving and material saving, which can greatly reduce the cost, and is simple to operate. It does not require scaffolding, no mobile equipment, and no need for repairs. The yin and yang angles and roof panels can all be sprayed freely. Fast, efficient, and low labor intensity, a spraying machine can easily spray 150 square meters per hour. The main disadvantages of the artificial wall and the previously-produced powder wall machine are the low adhesion of the mortar and the wall and the low density of the mortar. The flow rate of the spraying equipment introduced by our company is large and the pressure is high. These defects are overcome and the density of the mortar far exceeds that of the country. The prescribed standards avoid the problems caused by problems such as quality, duration, and wages. Multi-purpose machine can be used to spray mortar, waterproof coating, refractory materials, regardless of the regional and environmental conditions and the shape of the spray surface.Mortar spraying machineMortar spraying machine


Product Details
Features of mortar spraying machine:

1. Suitable spray materials: putty powder, paint, latex paint, real stone paint, cement mortar, dry powder mortar, thermal insulation mortar, waterproof materials, fireproof materials, thermal insulation materials, sound-absorbing materials and other water-soluble materials.
2. Adjust the flow rate to adjust the best spraying effect.
3. In addition to the switch on the electric control box, it is also equipped with a remote control switch for spraying.
4. The connection between the spray gun and the feeding pipe can be rotated for easy operation.
5. High construction efficiency and good quality.
6. Small size, easy to carry on site, low cost of accessories and simple maintenance. Fast speed, high efficiency, low labor intensity, a spraying machine (multi-function speed control) can easily spray 150 square meters per hour, except for preparation time, working 8 hours per day, can spray more than 1000 square meters, equivalent to 20 skilled workers Hard work for a day.

Product parameter

 

1. The quality of spray paint has a small mutual change rule, and the quantity and size are uneven.In all normal spray painting, the total flow suddenly decreases and the feed is uneven.
   Generally, there are the following reasons. Too long spray pipe spacing will cause the total flow to decrease. Under normal conditions, the operation is within 40 meters, and the distance between the cement mortar and the wall thickness increases, causing the total flow to slowly decrease. The movement of the gas rod in the nozzle causes uneven feeding. Before each painting, check the distance between the management center of the gas rod and the nozzle, and the distance between the front and rear, left and right. If the gas at the inlet is abnormal, the atomization will be poor, which can be checked. Is the operation of the air compressor normal? Generally, if the gas working pressure is between 0.4-0.6mpa, everything is normal. In addition, check whether the bronchial tube is leaking steam and whether the gas rod is blocked.
    
2. Reasons and solutions for the blocked pipeline.
   When painting, the working pressure is too high and the pipeline is blocked. The transportation distance is too far during painting, and the aspect ratio is too high. The working pressure is too high. The working pressure in the cement mortar pipe rises, causing bleeding at the joints, causing blockage of the pipeline. Such conditions generally indicate signs of blockage. In the whole process of painting, the total flow is significantly reduced, and the pressure is slowly increased. At this time, the worker should shut down immediately, and the blockage of the pipeline is usually at the feed inlet and the docking place in the early stage, and the removal is very simple. If the pipeline is seriously blocked if it is not shut down immediately, only tap water to clean the pipeline to remove it. Choose a suitable plastic hose from the bottom right to the top to carry out cleaning.
    
3. The main motor cannot be started during work
   If the distance between cement mortar and transportation is too long, the frictional resistance of cement mortar transportation is enlarged, which exceeds the reasonable load of the motor. Therefore, within the reasonable spraying distance of the mortar sprayer, the transportation distance should be reduced as much as possible, and the frictional resistance of the suction filter blender is not enough to increase. Each shift uses a technical professional gasoline pump to lubricate the blender once, and the external power cord is too thin. Generally, the power plug is within 50 meters of the national standard of 6 square meters. The power plug must not be turned, otherwise the current intensity will be abnormal.
    
4. The air compressor cannot be started
   The diastolic pressure of the pressure controller is too high, or the power switch on the air compressor is not turned on, the valve power switch on the spray gun is not turned on, the air needle in the spray gun is blocked, and the air pump is turned on every time it is started, and the air pump is turned off after standby to avoid cement mortar Flow back into the air needle causing blockage.
    
   
   Compared with the performance of the traditional hand-painted wall, plastering and the previously marketed paint wall machine, the mortar spraying machine has the following advantages:
   1. There is basically no ground ash, saving water and materials, and can reduce the cost by more than 20%.
   2. Simple operation, no need to set up scaffolding, no mobile equipment, no need to repair and build stubble. Both the male and female corners and the top plate can be sprayed freely, which shortens the construction period, improves the progress, and saves the expenditure of the frame material.
   3. Quick freezing, high efficiency and low labor intensity. A spraying machine can easily spray 150 square meters per hour. Excluding the preparation time, it can spray more than 1000 square meters for 8 hours a day, which is equivalent to 20 skilled workers' hard work in a day.
   4. Small investment, big income.
    
   Using equipment instead of labor will save construction costs while increasing efficiency and ensuring project quality. However, the quality of the project still needs to be checked by professional construction personnel. The mortar sprayer is currently divided into screw type and plunger type.

1. Screw spraying machine
   The rotor and rubber sleeve of the screw sprayer are very easy to wear, it is troublesome to replace, and the later maintenance cost is high. Although the screw type is uniform and pulse-free, it can be sprayed with high viscosity, but the requirements for mortar are very strict, and there can be no large particles. A little more sand is very easy to block the pipe. The ratio of Gaza is 1:3, but in actual use The process can reach 1:1 at most, and the screw-type screw push and the stator and rotor wear faster. The imported ones can be used for up to half a month, and the cost of tens of thousands of yuan is required for one replacement. The best domestic ones can be used for up to one week. , It costs thousands of RMB to change one time, the normal one can be used up to three days, and one change also costs thousands of RMB. There is also a short working distance.
2. Plunger spraying machine
   The plunger sprayer is much better. It has no wearing parts because it is driven by a steel crankshaft connecting rod, so there are almost no wearing parts. It is nothing more than changing the oil once a year. There is also a long working distance, the height can reach 50 meters, the parallel distance is 100 meters, and the mortar is transported about 7 square meters per hour, which greatly improves the work efficiency and is very practical. The advantage of the plunger type is that it is faster and is suitable for spraying ordinary mortar with a lower proportion of sand. The ratio to Gaza cannot be too large, and sand particles cannot be sprayed with high viscosity (such as crack-resistant mortar, putty).
     
    FAQ:
   Q1: Are you factory or trade company?
   A1: We are factory. And we have ourselves trading company.
    
   Q2: What the exactly address of your factory?
   A2:  No.27,Beichen Village Industrial Park, Weiyang District, Shaanxi Province China.                                                                                                                            
   Q3: Warranty terms of your machine?
   A3: One year warranty for the machine and technical support according to your needs.
   
   Q4: Will you provide some spare parts of the machines?
   A4: Yes, of course.
   
   Q5: What about the voltage of products? Can they be customized?
   A5: Our standard voltage is 380V, 50HZ, 3phase. The voltage can be customized according to your equirement.
    
   Q6: Which payment term can you accept?
   A6: 100% T/T( Decide according to actual situation)
   
   Q7: How long will you take to arrange production?
   A7: we can delivery the normal goods within 7-15 days. Other nonstandard electrical items we will delivery within 25-30 days.
    
   Q8: Can you accept OEM orders?
   A8: Yes, with professional design team, OEM orders are highly welcome.
    
   Q9: Which trade term can you accept?
   A9: Available trade terms: FOB, CIF, CFR, EXW, etc.
   
   Q10: Do you provide samples? Is it free or extra?
   A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of freight.
   
   Q11: What is your terms of payment?
   A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.
      
   Our Company Information:
   
   
   We have been focusing on high-quality mechanical equipment and construction products for more than 20 years. Especially have rich experience at mining equipment, main products include:
   
   Ultra Large Rock Splitter
   Submersible Drilling Rig
   Spraying Machine
   Grinding Machine
   
   About Our Factory:
   
   
   About the products:
   
   
   Packing and Shipping:
   
   
   Purchase Process:
   
   
   About the Quality:
   
   
   Why you choose us:
   
   1. We are a real factory offering products and provide free technical advice.
   2. Company in business for many years and served Over 50 countries customers.
   3. All machine with CE, ISO,SGS certificate. Machine and spindle warranty 1 year. 
   4. We have phone support in English, if you have any questions, you can call us, and we can give you the best solution within 24 hours.
   5. Fast delivery, save your time.