Ral7032 ral7035 grey texture wrinkle epoxy powder coatings for cabinet

Basic Information
Thermosetting powder coating is suitable for surface coating and decoration of metal (steel or aluminum) items, it is applied to the part or component by electrostatic spraying equipment.In a subsequent curing process, the powder coating is melted and chemically cross-linked at substrate temperatures of 150°C to 200°C.

The raw materials of powder coating are resins, pigments, fillers, harderner ect.Compared with liquid paint, powder coating is environmental friendly and can reduce costs.Powder coating can form a harder finish than conventional paint and can be applied more efficient.

Available Powder Types
Powder coatings are available in three basic types, each offering different performance attributes.

1.Pure Epoxy Powder Coating
2.Pure Polyester Powder Coating
3.Epoxy-Polyester Powder Coating(Hybrid)

What type of powder coating should I choose?

Epoxy for the best corrosion protection.Polyester for the highest exterior stability and performance.Hybrid(s) typically offer the best chemical and solvent resistance.

Thermosetting art-veins powders include such varieties as coatings with hammer, wrinkle, texture and other finishes.The products may provide coatings with excellent decorative effect and the stereoscopic sense.The coatings of toughness and durability have not only covering capacity for the rough surface of workpieces or articles, but also good resistances to abrasion, scratch and chemical corrosion.The products are suitable for surface coatings of castings, pressure casting, heavy-duty machineries, engineering structural parts, freezers of chemical plant, kitchen utensils, steel pipe, frame, mechanical and electrical equipments, hardwares and tools, textile machinery, instruments and apparatus etc.

Introduction:

The raw materials of Powder coating are resins, pigments, fillers, harderner ect.Compared with lyquid paint, powder coating is environmental friendly and can reduce costs.Powder coating can form a harder finish than conventional paint and can be applied more efficient.While it also has disadvantages, it is not good for large amd heat-sensitive objects.Usually the thickness of film by powder coating is >30 μm.

• RAL colors coating powder
• Pantone colors
• Color-matching regarding customer requirement is available

GENERAL TYPES

• Polyester /Hybrid powder coating
• Epoxy Powder coating color
• Metallic powder coating color
• Hammer tone color powder coating
• Texture color powder coating powder

Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.

PHYSICAL PROPERTIES

• Specific gravity :1.2 ~ 1.8g/cm3 up to colors
• Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
• Level of liquidity:24 ~ 27 mm

CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

We offer free samples to you.

You can contact me informatoin as follows,
Attn:Danae