Products

100ml 8cavity Milk Bottle Blow Molding Machine

China 100ml 8cavity Milk Bottle Blow Molding Machine, Find details about China Automatic Blow Moulding, HDPE Blowing Machine from 100ml 8cavity Milk Bottle Blow Molding Machine

Model NO.
DM5D-90-8
Trademark
KINGSMAN
Transport Package
Bare Packing
Origin
China
HS Code
8401200000
Model NO.
DM5D-90-8
Trademark
KINGSMAN
Transport Package
Bare Packing
Origin
China
HS Code
8401200000
Subject: Technical Data for Blow Moulding
Machine type   DM5D-90-8T 
  1. General Issues1.All documentation should be English.
    1. Machine operating manual including DWG. of Hydraulic, Pneumatic, Assembly drawing, Cooling water.
    2. Max. volume of product:5L
    3. Machine Total weight : 6.5 ton
           
Clamping Unit
    1. Adopt reliable two-plate axes mold locking.
    2. Double station.
    3. Mold carriage stroke: 550
    4. Linear roller guidance horizontal: HIWIN,Transducer by Gefran (Italy)
    5. Clamping force: 80KN
    6. Mold platens H x W :410 x 380 mm
    7. Distance between the platens: 240-500 mm
 
  1. Die Head
    1. Type of continue die head.
    2. 100 point WDS system controller
    3. Type of temperature sensors: K
View stripe unit:    
Screw diameter: 24/20D
AC motor drive: 1.5KW(AC)
heating power 0.5KW(single phase)
 
  1. Extruder System
    1. Extruder should be adequate to work with HDPE, PP
    2. Screw diameter: 75/25D
    3.  Ceramic Heaters for Screw
    4.  Ceramic heater with heater preserving and protection cover of stainless steel.
    5. Type of temperature sensors: K
    6. AC motor drive: 22KW-SIMENS (BEIDE)
    7. Plasticizing efficiency: 75-80KG/H
    8. Heating power: 15 KW
    9. Cooling by 3 cooling fans.
    10. Move forward and backward of extruder +/- 15 mm
    11. Raw material hopper with a window, pneumatic valve control slide between hopper and feeding zone     from operator panel.
 
  1. Blow System
    1. Upper blowing
    2. Mechanical adjustment for up/down and left/right
 
  1. Hydraulic System (SERVO System)
    1. Hydraulic working pressure: 120 bar
    2. Hydraulic system with servo pump: 80 L/min (REXROTH PUMP),Servo motor:11KW-RExroth
    3. Proportional valve for Mold carriage by HNC (TAIWAN)
    4. Hydraulic valves :Yuken
    5. Threads of hydraulic block use of screw joint GE(ISO 1179)
    6. Servo Valve:MOOG
    7. Servo Motor power: 11KW+ parison Motor power 4KW (SIMENS)
 
  1. Pneumatic System
    1. Separate service unit with filter for blow and move functions.
    2. Pneumatic cylinders  AIRTEC
    3. Pneumatic solenoid valves AIRTEC
    4. Max. pressure of all components: 10 bar
    5. Max. pressure of gauge: 10 bar
    6. Air consumptions: 1.2 m3/min
 
  1. Control System
    1. Touch Screen: Invovance; PLC Mitsubishi;
    2. Servo system control system: MOOG -100Points
    3. All electric components needs to be for power supply 240V/415V, 50Hz, controller DC24V, signal 0-10V
    4. According to Low voltage directive 73/23/EEC
    5. Three-phase Four-wire System
    6. Total rated power: 74 KW; Average consumption:25KW
    1. components (Air switch, Contactor):  Schneider ; intermediate relay: Schneider
    2. of extuder motor :Invovance
    3. transducer: Gefran
    4. Proximity switch: Fenix

 

 
  1. Cooling water
    1. All pipes for cooling water made of rubber material.
    2. Separate cooling water circuit for Mold, Blow pin, Extruder feeding zone, Oil cooling.
    3. Controlled cooling water for feeding zone and oil cooling
    4. Water consumptions: 8 m3/h
      Machine frame   
  3.      Blow system backward: 150 mm, for mold changing
    1. Steel Cover for safety doors, with plastic window
    2. Extruder stage up/down by lifting device: 250mm
    3. Machine color: according requirement of customer
    4. Overall dimensions of machine LxWxH: 4.8 x 3.5 x 2.6 m
100ml 8cavity Milk Bottle Blow Molding Machine
100ml 8cavity Milk Bottle Blow Molding Machine100ml 8cavity Milk Bottle Blow Molding Machine100ml 8cavity Milk Bottle Blow Molding Machine
Weclome to visit Kingsman(ZhangJiaGang)Mechanical &Equipment Co.,ltd
 Main focus
KINGSMAN Company is the leadership of Extrusion blow moulding machine manufacturer Which had long-Term cooperation with KUATEX TEXTRON company from year 2010-2013 for 6 layer fuel tank machine.  
KINGSMAN Company is espeicalized in Automatic Blow Moulding machine with High production.and now focus on Servo hydraulic machine for energy saving.
 

You Might Also Like