Brief introduction of the tubular centrifuge :

Tubular centrifuge is a kind of centrifugal equipment with high separation factor.The minimum separation particle size is 1micron.

It is especially used in extraction ,enrichment and clarification of material with the following situations:the specific gravity difference between solid phase and liquid phase is small;the patrical size is samll and solid content is low;the medium is strong corrosive.Mainly used in the solid-liquid separation and liquid-liquid-solid separation for food ,chemical,beverage,biological pharamacy,blood products,solid-liquid separation of intermediates and so on.

This machine has the advantages like: good separation effect,high yield,small cover area,easy operation etc.

Tubular centrifuge is mainly divided into clarify series GQ and separation series GF.

GF separation series:                                                                                                             

This type mainly used for various industrial suspension very diffculty to separate,especially suitable for liquid-liquid suspension with small specific gravity difference between solid phase and liquid phase,and liquid-liquid-solid separation with few impurities.

Liquid with large density deposit on the outer wall of the drum and liquid with smallwe density deposite on the inner wall of the drum.Both of them get to the upper part of the drum to discharge .Solid particles deposit on the drum wall to be artificially discharge after downtime.

Technical parameter of the tubular centrifuge :                                                                        

More photos of the tubular centrifuge:                                                                                    

GF series tubular centrifuge is mainly used for separating emulsion and mixing several kinds of liquid-liquid-solid phases contained a little impurity. The machine can get the most ideal result of separation when foreign matter or solid phase product contained in liquid is less than 1%. Clarification should be recommended first if the percentage is over 1%.

When works, the mixed slurry is sprayed onto the bowl from the inlet on the bottom, with the strong centrifugal force, allowing the milk flow upper along the wall of the bowl, together with different gravity of the oil and water, heavy liquid(water) forms outer ring and light liquid(oil) forms inner ring. They flow to the top of the bowl and discharge from their respective outlet. And the little particle is settled on the wall of the bowl and discharged manually after the machine stops.

There are two main ways to extract essential oils:(both of this two ways, tubular centrifuge will be used in the liquid liquid separation.)
1. Steam distillation is the most common method of extraction because it is the easiest to operate and low in cost. The fresh or dried aromatic plant material is placed in a distiller, heated by steam to the bottom, and the essential oil in the plant is evaporated along with the vapor. After the water vapor containing the essential oil is collected and cooled by the conduit, the vapor is cooled to a liquid, and then separated according to the difference in specific gravity and density of the water and the essential oil. Among the remaining water, more or less some essential oils are dissolved inside. This is called flower water, and most of the essential oils are extracted in this way.
  2. Freezing compression method (pressing method) It is specially used to extract essential oils stored in the peel, such as citrus fruits. The extraction method is to add water during the process of crushing the peel, and after collecting the juice, the essential oil is separated by a refrigerating centrifuge.

Our service

1.We have professional person on line to provide you comprehensive.easy-understanding and detail information and technical data about the machine you interested;solve your confusions or questions about the machine 

2.Advise you the most suitable type of machine according to your requirement for your reference

3.Arrange the schedule if you pay a visit to our factory.

4.Send our technical engineer to your country for installation ,operation test ,slove questions and so on if required.

All of Toper's products:

1. Program-controlled automatic filter press

2. Membrane filter press

3. Hydraulic compress filter press

4. Mechanical compress filter press

5. Jack filter press 

6. Cast iron plate and frame/chamber filter press 

7. Stainless steel plate and frame filter press

8. Round plate filter press

9. Cotton cake filter press

10. Cardboard filter press 

11. DY belt filter press

12. DYX high pressure belt filter press

13. DNY rotary drum thickning/dehydrating belt filter press

14. Triple-belt thickning and dehydrating filter press

15. SS type three-foot upper discharge centrifuge

16. SD type three-foot and filter bag hoist discharge centrifuge

17. PD type filter bag hoist discharge centrifuge 

18. Centrifuge of up discharge, three foot, clean series SSB

19. SX type manual top discharge centrifuge

20. PS type manual top discharge centrifuge

21. SGZ type automatic scraper bottom discharge centrifuge

22. PGZ type scarper bottom discharge centrifuge

23. LW series decanter centrifuge

24. Tubular centrifuge 

25. Multi-layer stainless steel frame filter

26. Bag filter

27. Diatomite filter 

28. Filter late

29. Filter cloth

30. Vacuum disc filter