Products

Yx25 -200-600 Roofing Sheet Glazed Tile and Sheet Roll Forming Making Machine

China Yx25-200-600 Roofing Sheet Glazed Tile and Sheet Roll Forming Making Machine, Find details about China Cold Roll Forming Machine, Roll Forming Machine from Yx25-200-600 Roofing Sheet Glazed Tile and Sheet Roll Forming Making Machine

Model NO.
Yx25-200-600
Feeding Width
750 mm
Effective Width
600 mm
Thickness
0.18 mm
Yield Strength
350 MPa
Trademark
Xiamen Liming
Transport Package
40gp*1
Specification
12T
Origin
Fujian, China(Mainland)
Model NO.
Yx25-200-600
Feeding Width
750 mm
Effective Width
600 mm
Thickness
0.18 mm
Yield Strength
350 MPa
Trademark
Xiamen Liming
Transport Package
40gp*1
Specification
12T
Origin
Fujian, China(Mainland)

This Producing Process Sketch As Below Picture:

Yx25-200-600 Roofing Sheet Glazed Tile and Sheet Roll Forming Making Machine



This Profile Drawing As Below Picture:
Yx25-200-600 Roofing Sheet Glazed Tile and Sheet Roll Forming Making Machine







 
General Parameter
1ItemParameters
2Model NO.YX25-200-600
3Materialgalvanized sheet
4Thickness0.18 mm
5Yield Strength350 MPa
6Feed Width750 mm
7Effective width600 mm
8Roll Stages18 Stages
9Shafts Diameterф75/95 mm
10Main Motor Power15 KW
11Hydraulic Group Power7.5 KW
12Max. Line Speed Of Roll FormerApprox.40 m/min
13Electric StandardAccording to local voltage


Machine Components
 




A.  5Ton*1250mm Hydraulic un-coiler  
      Hydraulic system expand coil inner hole, Pump motor: 3KW
       Frequency Inverter to regulate turning speed, Motor: 11KW
       To fit the Max. Line speed of roll former: 40mpm
       Taper wedge expand type instead of Link-connect expanding system
       Load capacity = Max.5Tons
       Coil Inner-diameter=510±30 mm, Coil width = Max.1250mm
       Automatic stopping device with limited switch as assistance to control stop/star rotationYx25-200-600 Roofing Sheet Glazed Tile and Sheet Roll Forming Making Machine






B.   Entry bench and Manual pre-shearing device
       Entry bench and manual pre-shearing device
       Working thickness: up to 0.6mm
       Smart cut control, to cut off the end of the final piece of sheet only
Yx25-200-600 Roofing Sheet Glazed Tile and Sheet Roll Forming Making Machine




 C.  Lubrication Device
       Lubricate steel strip surface before strip feed into roll forming station.
       Full of oil-felt disc cover on the upper and lower shafts
       1 set of lubricating rollers
       Oil supplied by manual


D.  Cold Rolling Mills
       Feeding section with guide;
       Gear/Sprocket driving;18 stages to form
       New-stand-frame-design
      Rollers manufactured from 45# steel, hard chrome coating 
       NTN ball bearing at both ends of shaft in each forming stage
      Shafts Diameter=ф75/95mm, Precision Machined
      Main motor =15KW,Frequency speed control
      Max line speed of roll former: Approx.40m/min

Yx25-200-600 Roofing Sheet Glazed Tile and Sheet Roll Forming Making Machine




 E.  Hydraulic Cutting Device
       Stop to cut, Post cut, No Blanking cut
       Cutting tool material : Cr12Mov, Heat treatment;
       Hydraulic tank,Pump motor =7.5KW

Yx25-200-600 Roofing Sheet Glazed Tile and Sheet Roll Forming Making Machine

       




 F.  PLC Control System
       Control the quantity & cutting length automatically;
       Combined with: PLC, Touch Screen (Siemens), Inverter (Schneider), Encoder (Omron), etc
Cut-to-length tolerance≤±2 mm
Control Voltage 24V

Yx25-200-600 Roofing Sheet Glazed Tile and Sheet Roll Forming Making Machine


G.  Product Rack    Un-powered, 3 units
 
Yx25-200-600 Roofing Sheet Glazed Tile and Sheet Roll Forming Making MachineYx25-200-600 Roofing Sheet Glazed Tile and Sheet Roll Forming Making Machine
 
After-Sale Service
In correct operation & maintaining, the machine is guaranteed for one year since leaving our factory excludes the electric elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer's factory abroad to assist regulating the machine with charge free. The buyer should assist US to get the Chinese technician's visa and should pay for the roundtrip air ticket and the local accommodation.
If installation is needed, the buyer shall make the following preparation before arrival of technicians.
 
Terms Of Trade
1.Package & Shipment: Facility water-proof packing, Control cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit within a week since the contract signing date.70% payment by T/T is required before the machine be send out of factory.

You Might Also Like