J941y Electric Globe Regulator Control Valve
China J941y Electric Globe Regulator Control Valve, Find details about China Valve, Globe Valve from J941y Electric Globe Regulator Control Valve
Basic Info.
Model NO.
J941Y
Usage
Regulation, Truncation
Application
Industrial Usage, Water Industrial Usage, Household Usage
Manufacturer Level
Top Level
Trademark
Jun Kang
Transport Package
Wooden Box
Specification
Stainless Steel
Origin
China
HS Code
8481100090
Model NO.
J941Y
Usage
Regulation, Truncation
Application
Industrial Usage, Water Industrial Usage, Household Usage
Manufacturer Level
Top Level
Trademark
Jun Kang
Transport Package
Wooden Box
Specification
Stainless Steel
Origin
China
HS Code
8481100090
Product Desciption
The Introduction of Products
J941Y Electric Globe Valve
J941Y flange connection electric stop valve is suitable for cutting or connecting the pipeline medium in petroleum, chemical, pharmaceutical, chemical fertilizer, power industries and other working conditions with nominal pressure PN1.6 ~ 16MPa and working temperature -29 ~ 550ºC. J941Y globe valve drive mode is electric. There are also manual, gear transmission, pneumatic and so on according to the requirements of the user. The globe valve is more resistant to high temperature than cast iron and carbon steel globe valve. The highest temperature can be 550ºC, which is about 5 times that of cast iron globe valve. High pressure range up to 16Mpa. It is the best choice for high temperature and high pressure pipeline.
Scope of use of J941Y
Because the flow direction of the medium through the chromium-molybdenum globe valve changes, the minimum flow resistance of chromium-molybdenum globe valve is also higher than that of most other types of valves. However, depending on the body configuration and stem layout relative to the inlet and outlet channels, this condition can be improved. At the same time. Because of the small travel between the disc opening and closing, and the sealing surface can withstand multiple opening and closing, it is very suitable for occasions requiring frequent switching.
Main dimensions and weight
Other Products
J965Y Electric DC Butt Welding Stop Valve
Electric DC butt welding stop valve is composed of high quality stop valve and high precision electric actuator. The electric DC butt welding stop valve has the advantages of reasonable structure, excellent performance, beautiful appearance and wide range of pressure. It is mainly used to connect or cut off the medium in the pipeline. The electric DC butt welding stop valve has the advantages of wear resistance, high temperature resistance, good anti-abrasion performance and long service life.
Design standards
1. Design and manufacture of JB3595.
2. The length shall be in accordance with JB3595 or user requirements.
3. Connect terminals according to JB3595 or user requirements.
4. Valve inspection and test according to JB3595.
Main parts and materials
The product selection
(1) Valve body parameters: nominal diameter, working pressure, process medium, application occasions, valve body material and other parameters.
(2) Actuator parameters: power supply voltage, control mode (switch type, control type), control signal (4-20MA,1-5V), mode of action (electric-open, electric-off)
Provide the above technical parameters in detail as far as possible, so that our sales and technical staff can select the correct type for you. If you have any questions, you can call us, we will do our best to provide you with quality service!
Z61Y Forged Steel Welding Gate Valve
J941Y flange connection electric stop valve is suitable for cutting or connecting the pipeline medium in petroleum, chemical, pharmaceutical, chemical fertilizer, power industries and other working conditions with nominal pressure PN1.6 ~ 16MPa and working temperature -29 ~ 550ºC. J941Y globe valve drive mode is electric. There are also manual, gear transmission, pneumatic and so on according to the requirements of the user. The globe valve is more resistant to high temperature than cast iron and carbon steel globe valve. The highest temperature can be 550ºC, which is about 5 times that of cast iron globe valve. High pressure range up to 16Mpa. It is the best choice for high temperature and high pressure pipeline.
Scope of use of J941Y
| The product type | Applicable medium | The use of temperature |
| J941Y-C | Water, steam, oil | ≤425ºC |
| J941Y-I | ≤550ºC |
Main dimensions and weight
| DN Nominal diameter | Main external dimensions and connection dimensions(mm) | Weight(kg) | ||||||||
| L | D | D1 | D2 | b | f | z-d | H | D0 | ||
| J941Y-16C J941Y-16I | ||||||||||
| 10 | 130 | 90 | 60 | 40 | 14 | 2 | 4-14 | 198 | 120 | 4.7 |
| 15 | 130 | 95 | 65 | 45 | 16 | 2 | 4-14 | 218 | 120 | 5.2 |
| 20 | 150 | 105 | 75 | 55 | 16 | 2 | 4-14 | 258 | 140 | 7.1 |
| 25 | 160 | 115 | 85 | 65 | 16 | 2 | 4-14 | 275 | 160 | 7.4 |
| 32 | 180 | 135 | 100 | 78 | 18 | 2 | 4-18 | 280 | 180 | 8.5 |
| 40 | 200 | 145 | 110 | 85 | 18 | 3 | 4-18 | 330 | 200 | 12.5 |
| 50 | 230 | 160 | 125 | 100 | 18 | 3 | 4-18 | 350 | 240 | 20 |
| 65 | 290 | 180 | 145 | 12 | 18 | 3 | 4-18 | 400 | 280 | 25 |
| 80 | 310 | 195 | 160 | 135 | 20 | 3 | 8-18 | 355 | 280 | 35 |
| 100 | 350 | 215 | 180 | 155 | 22 | 3 | 8-18 | 415 | 320 | 50 |
| 125 | 400 | 245 | 210 | 185 | 24 | 3 | 8-18 | 460 | 360 | 75 |
| 150 | 480 | 280 | 240 | 210 | 24 | 3 | 8-23 | 510 | 400 | 100 |
| 200 | 600 | 335 | 295 | 265 | 26 | 3 | 12-23 | 710 | 400 | 210 |
| 250 | 650 | 405 | 355 | 320 | 30 | 3 | 12-23 | 786 | 450 | 446 |
| 300 | 750 | 460 | 410 | 375 | 30 | 3 | 12-23 | 925 | 500 | 648 |
Other Products
J965Y Electric DC Butt Welding Stop Valve
Electric DC butt welding stop valve is composed of high quality stop valve and high precision electric actuator. The electric DC butt welding stop valve has the advantages of reasonable structure, excellent performance, beautiful appearance and wide range of pressure. It is mainly used to connect or cut off the medium in the pipeline. The electric DC butt welding stop valve has the advantages of wear resistance, high temperature resistance, good anti-abrasion performance and long service life.
Design standards1. Design and manufacture of JB3595.
2. The length shall be in accordance with JB3595 or user requirements.
3. Connect terminals according to JB3595 or user requirements.
4. Valve inspection and test according to JB3595.
Main parts and materials
| Part name | Material mark | ||
|---|---|---|---|
| The valve body | WCB | WC6 | WC9 |
| The piston | A105 | WC6 | WC9 |
| The cover | 25 | 12Cr1MoVA | |
| The valve stem | 1Cr17Ni2 | 20Cr1Mo1V1A | |
| Sealing ring | 05F | 05F | Flexible graphite |
| Four open loop | 1Cr13 | 20CrMOIVIA | |
| Packing | BSP-600 | BSP-600 | |
| Stents | WCB | WCB | |
| Stem nut | ZQAL9-4 | ZQAL9-4 | |
| Test pressure(Mpa) | Nominal pressure(Mpa) | Pressure level(class) | JIS(K) | |||||
| 16.0 | 20.0 | 25.0 | 32.0 | 900 | 1500 | 20K | 40K | |
| Strength test | 24.0 | 30.0 | 37.5 | 48.0 | 22.5 | 39.0 | 7.5 | 16.5 |
| Sealing test | 17.6 | 22.0 | 27.5 | 35.2 | 16.5 | 28.6 | 5.5 | 12.1 |
| Working temperature | ≤425ºC | |||||||
| Applicable medium | Water, steam, corrosive media | |||||||
The product selection
(1) Valve body parameters: nominal diameter, working pressure, process medium, application occasions, valve body material and other parameters.
(2) Actuator parameters: power supply voltage, control mode (switch type, control type), control signal (4-20MA,1-5V), mode of action (electric-open, electric-off)
Provide the above technical parameters in detail as far as possible, so that our sales and technical staff can select the correct type for you. If you have any questions, you can call us, we will do our best to provide you with quality service!
Z61Y Forged Steel Welding Gate Valve
| Caliber | DN10-DN100 |
| Pressure grade | 1.6Mpa-32Mpa |
| The connection form | Welding |
| Seal form | Hard seal |
| Use | Truncation |
| Frive way | Manual |
| Flow direction | Two-way |
| Temperature range | -29ºC-425ºC |
| The valve body material | Carbon steel |
| Medium range | Water, solvent, natural gas, oxygen, hydrogen, peroxide, methane, ethylene, etc |
| Scope of application | Mining industry, petroleum industry, long pipe transmissionline, chemical industry,pharmaceutical, water conservancy, electric power, municipal administration, iron and steel |
| Specs | L | W | H | Weight(kg) | |||||
| British system | metric system | Class150 | Class300 | Class600 | Class150 | Class300 | Class600 | ||
| 3/8 | 10 | 102 | - | - | 2.8 | 151 | 2.8 | - | - |
| 1/2 | 15 | 108 | 140 | 165 | 2.8 | 151 | 2.8 | 3.5 | 4.5 |
| 3/4 | 20 | 117 | 152 | 191 | 3.3 | 158 | 3.3 | 4.4 | 5.1 |
| 1 | 25 | 127 | 165 | 216 | 5.4 | 190 | 5.4 | 6.8 | 8.2 |
| 11/4 | 30 | 138 | 178 | 229 | 7.1 | 219 | 7.1 | 8.1 | 10.5 |
| 11/2 | 40 | 165 | 191 | 241 | 8.2 | 246 | 8.2 | 9.2 | 12.4 |
| 2 | 50 | 178 | 216 | 292 | 12.5 | 283 | 12.5 | 15.4 | 20 |
Schedule of standard materials
| Serial number | Part name | CS to ASTM Type A105N | CS to ASTM Type f22 | SS to ASTM | |
| Type F304(L) | Type F316(L) | ||||
| 1 | The valve body | A105N | A182 F22 | A182 F304(L) | A182 F316(L) |
| 2 | The seat | A276 420 | A276 304 | A276 304(L) | A276 316(L) |
| 3 | Ram | A182 F430 | A182 F304 | A182 F304(L) | A182 F316(L) |
| 4 | The valve stem | A182 F6a | A182 F22 | A182 F304(L) | A182 F316(L) |
| 5 | Gasket | 304Flexible Graphite | A182 F304 | ||
| 6 | The cover | A105N | A182 F22 | A182 F304(L) | A182 F316(L) |
| 7 | Bonnet/bolt | A193 B7 | A193 B16 | A193 B8 | A193 B8M |
| 8 | Cylindrical pin | A276 420 | A182 F304 | ||
| 9 | Packing gland set | A276 410 | A182 F304(L) | A182 F316(L) | |
| 10 | Eyelet bolt | A193 B7 | A193 B16 | A193 B8 | A193 B8M |
| 11 | Packing pressure plate | WCB | A182 F11 | A182 F304(L) | A182 F316(L) |
| 12 | Nut | A194 2H | A1944 | A194 8 | A194 8M |
| 13 | Stem nut | A276 420 | |||
| 14 | Lock nut | A194 2H | A1944 | A194 8 | A194 8M |
| 15 | Nameplate | SS | |||
| 16 | The handwheel | HT200 | |||
| 17 | Lubrication gasket | A473 431 | |||
| 18 | packing | Flexible Graphite+Carbon Fiber | PFTE | ||
| Applicable medium | Water, steam, oil, etc | Water, steam, oil, etc | Nitric acid, acetic acid, etc | ||
| The use of temperature | -29ºC-425ºC | -29ºC-550ºC | -29ºC-200ºC | ||
ZHE JIANG JUNKANG VALVE TECHONOLOGY CO., LTD
Professional Control Valve Manufacturer
Company ProfileJunkang Fluid Technology Co., Ltd. is an expert manufacturer of regulating valves and pressure relief valves. The company is located in the "township of pumps and valves in China" - Oubei Sanqiao Industrial Zone. It is 30 kilometers away from Wenzhou Longwan International Airport, 12 kilometers away from Wenzhou South Station and 10 kilometers away from Yongjia Station.
The company has strong technical force, with a number of sets of advanced production equipment and testing equipment. The technical team has rich product experience. The company has large-scale production. Products with reasonable design, beautiful appearance, stable quality and other characteristics, are widely used in power plants, iron and steel plants, oil extraction, refining and chemical industry, paper making, metallurgy, medicine, construction and other fields, long-term trust and praise by new and old users.
Junkang Valve has always been market-oriented, strict quality control, to ensure that the interests of users are effectively guaranteed. The company adheres to the "high quality as the main line, excellence as the goal", adheres to the "business integrity, quality innovation" business philosophy, and in the fierce market competition to establish a mutually beneficial sales network, highlighting the unique advantages of Junkang Valve.
Production Equipment
Certificate
After- Sale Service can be Provided
ADD:Dongou Industial Area, Oubei Town, Yongjia County, Wenzhou City, Zhejiang, China
FAQ
1.What's Your Strong Products?
The control valve series are our strong products.
2.If The Factory Has The Control Valve In Stock?
There are no control valve in stock at anytime, because this kinds of products are made by client's requirements
3.Can I request to advance the shipment?
It should be depends on whether there is sufficient inventory in our warehouse.
4. Can I request to change the form of packaging and transportation?
Yes, we can change the form of the packaging and transportation according to your request, but you have to bear their own costs incurred during this period and the spreads.
THE END
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine