1) Kneading machine does very well in mixing, kneading, crushing and dispersing for high viscosity liquid materials, with no dead point. 
2)Two sigma or Z-type blades.
3)Equipped with inverter for frequency control.
4)Vacuum and high pressure are available
5)The cylinder is opened hydraulically. 
6)Discharge mode: Hydraulic tilting, Bottom pumping,or Screwing.
7)With jacket outside of the cylinder, for heating or cooling.
8)Heating mode: Hot oil, Electric or Steam.
9)All the parts that contact with material are made of stainless steel.
JCT Jacketed Heating Vacuum Kneading Machine (NHZ-600)

1).preparation of raw materials according to the formula,Add Vinyl silicone rubber,silicone oil,Release agent to the kneader,Stirring;Powder raw materials are added many times.
2)A continuous stir to increase the temperature of the material , When the temperature reaches a certain value, the water cooling.
3)Pour the mixture into Receiving trolley,
4)The material is cooled by an open mill,Rapid cooling
5)The mixed silicone rubber is filtered and molded ,Then cut it and pack it. 

Technical parameters
 

1)300L High temperature vulcanized silicone rubber production line;
2)500L High temperature vulcanized silicone rubber production line;
3)1000L High temperature vulcanized silicone rubber production line;
4)2000L High temperature vulcanized silicone rubber production line;

Q : Can you send the formula for the products we want to make ?
A : Our machines can be used for many kinds of product making ,such as Resin , Paint, Adhesive , Cosmetic , Food , Chemicals . There are many kinds of these products , so it's impossible for us to know all the formulas and technologies . We can assist you to find the raw material list you need , and after you place order with us , we can help you to find formula and technology , there will engineers to teach you how to make the product , and the cost will be on your account.  

Q : Do you have machines in stock ?
A : Yes , but just the small-scale machines Machines are different with other products , most of the large-scale machines are designed according to our customers 'requirements different customers have different production requirements , so the technical parameter is different for most machines On the other hands , most of the our machines will cover a large area , so once the machines are finished , we will effect shipment after QC . 

Q : Can you send the detailed drawings of the machine to us before we place order ?
A : We can send you a draft drawing of the machines , and after you place order and pay the deposit , our engineer will design the send you the detailed drawings . Once you confirm without questions , we will put it into production.