Automatic Busbar Reversal Production Line, Bus Duct Manufacturing Line

China Automatic Busbar Reversal Production Line, Bus Duct Manufacturing Line, Find details about China Busbar Assembly Line, Busbar Production Machine from Automatic Busbar Reversal Production Line, Bus Duct Manufacturing Line

Basic Info.

Model NO.

KDEQ-01-111

Production Scope

Product Line

Trademark

Kiande

Transport Package

Plywood Case

Specification

18000mm*800mm*800mm

Origin

China

HS Code

847981900

Model NO.

KDEQ-01-111

Production Scope

Product Line

Trademark

Kiande

Transport Package

Plywood Case

Specification

18000mm*800mm*800mm

Origin

China

HS Code

847981900

Product Desciption

Busbar semi-automatic reversal assembly line / Busbar Production equipment for busway system
Specification:
1. Suitable for straight compact busbar 630A~2500A, single layer, length 1.5~6m
2. Automatic end alignment, clamping and moving controlled by PLC
3. Manual riveting: two pieces or four pieces riveters depending on customer's busbar type (two piece requires one piece riveter or four piece requires two pieces riveters);
Advantages:
1. The semi-automatic busbar production line can realize automatic clamping from left to right and down to up which is convenient for drilling and riveting.
2. The production line is flexibly compatible,suitable for busbar with width 74.5mm-350mm.
3. The electrical control system can clamp at the same time or separately.
4. The semi-automatic busbar assembly line is a cost-effictive production line and more stable which can decrease the NG rate and labour cost and increase the working efficiency.
5. The clamping is powered by air compressor 5-8MPA, which only comsumes the air when operation and is more environment-friendly comparing with the electrical comsumption of oil pressure.
Specification:

Busbar structure	Four-piece	Remark
Busbar height	H=113~650mm
Busbar length	1.2~6m
Connection structure	Riveting without hole
Nos Of riveting machine	More than 1 set
Housing dimension	L15~20m*3m
Control mode	Manual riveting, automatic reversal
Nos of swing-table	2~6 pieces
Nos of up-down clamping fixtures	3~4 pieces
Voltage	380/400V AC 50/60Hz
Power	5kW
Air source	0.6MPa

We are the company specialized in busbar machine.Busbar machine means busbar production machine or busbar processing machine including mylar sleeve forming machine, busbar assembly machine, busbar riveting machine, busbar testing & inspection machine, busbar packing machine and busbar conveying machine. If you want to know how we use the machine to assemble the busbar, please kindly get the referenced pictures as below.

Step 1 Prepare all busbar finished components

Step 2 Use related busbar machines to process the busbar

Busbar machine copper processing
Need Kiande's busbar gas-hydraulic copper bar punching machine(This is one-time punching forming. In the market, some busbar manufacturer buys three-in-one busbar machine to bend and punch copper or aluminum bar. As the bar experiences many procedures, the accuracy is not good which will cause the phase distance too small to cause the short circuit.)
Automatic Busbar Reversal Production Line, Bus Duct Manufacturing Line

Automatic Busbar Reversal Production Line, Bus Duct Manufacturing Line

Busbar machine mylar sleeve processing machine polyester film forming machine
Need Kiande's mylar/polyester film forming machine. In the market, some busbar manufacturer requests workers to wrap the bar manually. Different workers have different workmanship. If employer meets the inexperienced workers, the wrapping part will have some gaps which will cause the short circuit.
Automatic Busbar Reversal Production Line, Bus Duct Manufacturing Line

Busbar machine busbar accessory 3M insulation film Conductor(Copper bar/Aluminum bar) end wrapping
Automatic Busbar Reversal Production Line, Bus Duct Manufacturing Line