Products

Plastic Resin TPU Thermoplastic Polyurethane Resin for Transparent Phone Case

China Plastic Resin TPU Thermoplastic Polyurethane Resin for Transparent Phone Case, Find details about China TPU, TPU Resin from Plastic Resin TPU Thermoplastic Polyurethane Resin for Transparent Phone Case

Model NO.
TPU
Trademark
ZY
Origin
China
HS Code
39269090
Model NO.
TPU
Trademark
ZY
Origin
China
HS Code
39269090
Plastic Resin TPU Thermoplastic Polyurethane Resin for Transparent Phone Case
Specifications:
TPU granules, hardness, including: 80A/85A/90A/95A.

Features:
Normally including two categories: Polyester and polyether.
Hardness Shore 60A-72D.

Performance:
FDA certification;
Non-toxic, anti-wear ability (more wear than the POM and nylon), soft, high, silence, similar than the hardness of the rubber has a higher modulus of elasticity;
Good resistance to oil, hydrolysis, anti-UV (ozone), small swelling in non polarity solvent and fuel;
Good weather resistance (low temperature flexibility), without plasticizer; It can be dyed with good air permeability and moisture permeability;
TPU thermoplastic elastomers, high tension, high tensile, tough wear-resistant characteristics of aging, as strong of fiber products.

Processing methods:
Suitable for injection molding, blow molding and extrusion molding and other processing methods.

Application:
For all types of products such as shoes, industrial casters, hose, cable sheathing, film, advanced accessories, medical equipment and sports equipment.
 

Physical Properties		Testing
method
unit		E480AE485AE490AE495AE498AE464DE472D

Specific Gravity
 
 		1.21 ± 0.021.22 ± 0.021.22 ± 0.021.22 ± 0.021.23 ± 0.021.24 ± 0.021.25 ± 0.02

Hardness
 		ShoreA
ShoreD		80 ± 385 ± 390 ± 395 ± 3
55 ± 3
64 ± 3
72 ± 3

100!%Modulus
 		Kg/cm2507090110150180220

Tensiles Strength
 		Kg/cm2350380400450450500550

Elongation at break
 		0/0500450450420400350320

Tear Strength
 		Kg/cm28595105125150180200
70 degree permanence
Compression Set
 		0/03235384045
 
 

Abrasion Loss
 		Mg30323540506060
PolyolPolyester ( Normal Polyester )   Anti-Temperature : -30 degree  -80 degree
Testing Condition   Pull Strength Testing: extruding and forming 2mm trial sheet, after 100degree *16 heating and then testing.
Abrasion: Tober abrasion Wheel H-22, Weight 1kgs, Turning 1000 Circles
*Above data just for Reference.

You Might Also Like