Drywall angle bead roll forming machine

Our drywall angle bead roll forming machine  is a complete line which can make the corner bead automatically.It designed for production angle beads with punching holes.

The final product can be cut as per set length controller,and the length is automatically measured by encoder.When final product reached set length,machine will stop to cut the sheet automatically.Finish thhis action,the machine will run again continuously.

Drywall angle bead is also  called corner beads.It is formed from zinc coated steel strip or stainless steel.It is used on the corner of wall,and inside of plaster,on the corner which enables the straightness ,rigidity and long life time for walls.

1.Component of angle bead forming machine

1) Manual decoiler set 1

2) Main forming machine set 1

3) PLC control system set 1

4) Hydraulic pump station set 1

5) Post cut set 1

6) Electric motor set 1

7) Output table set 1

8)Punching system 1

2.ANGLE BEAD MACHINE/CORNER BEAD MACHINE TECHNICAL PARAMETER

1) Length of the main part 3000*800*1400mm

2) Weight of main part About 3 t

3) Voltage 380V/50HZ3Phase (as customer`s request)

4) Roller fixer Guide column

5) Frame Middle plate welded, Memorial arch frame type

6 Frame thickness 25mm

7 Drive mode Gear or chain

8) Material of rollers 45# steel with tempering

9) Material of shafts 45# steel with tempering

10) Diameter of shafts φ40mm

11) Number of rollers 10 rollers

12) Main power 3kw (Cycloidal planetary gear speed reducer)