Products

Hydraulic Press Brake

China Hydraulic Press Brake, Find details about China Press Brake, Hydraulic Press from Hydraulic Press Brake

Model NO.
SMK
Type
Press Brake
Trademark
Symkai
Transport Package
by Channel Steel
Specification
1.6m-20m
Origin
China
HS Code
8462219000
Model NO.
SMK
Type
Press Brake
Trademark
Symkai
Transport Package
by Channel Steel
Specification
1.6m-20m
Origin
China
HS Code
8462219000
Hydraulic Press Brake

DESCRIPTION:
 CNC DA53T CONTROLLER SYSTEM MACHINE MAIN CONFIGURATION:
  • 3+1 Axis control --- X for backgauge frontward/backward movement to get customerized width in each step, Y for slider/cylinder upward/downward movement to get customerized angle in each step.
  • Grating ruler controls the positioning of  Y axes and feedback to the CNC controller.
  • Using SERVO motors for X & Y.
  •  HIWIN ball lead screw and straight guide linear to ensure the accuracy of ±0.02mm.
  • Hydraulic and electrical overload protection
  • Adopt multi-V lower die (86°,42CrMo material type), also can use double-v type lower die 
 Machine standard main components & Optional
No.Div.Main ComponentsBrand LocatedRemark
1StandardDA53T CNC Controller Holland DELEMWidely use in market
2Hydraulic SystemRexroth-Germany Bosch--
3Oil PumpRexroth-Germany BoschGear pump
4SealsNOK-Japan--
5Oil Tube ConnectorEMB-GermanyCasing connector
6Clamping General Clamping Tools Amada hook type
7 ToolingsSYMKAI brand Up punch & Lower die
8Ball lead screwHiwin-Taiwan--
9Grating rulerSpain FAGORAccurate positioning
10ElectricsSchneider-France--
11Foot PedalKacon-KoreaW/ emergency button on
12OptionalBOKE back gaugeChina Famous BrandWhole set back gauge design type
13 fast clampingJapan KOYYOKOHigher precision
14Light beam protectionLNTECH-ChinaCE must needed
15Rear door limit switch protectionSchneider-France

DA53T CONTROLLER MAIN FEATURES:
     To make a new program and select a program out of the product library.

      To setup the machine and modify existing tool setups.

      To create a new CNC-program or edit an existing CNC-Program numerically.

      User settings and preferences applicable to the programming of new programs. Also the required material properties can be            programmed in the Material library.

     To program all settings for making one single bend, not related to a program.

     To start production of the selected program.

      User settings and preferences applicable to the machine, tooling library including the tool editor, backup/restore of data, software version info etc.

Bend methods

air bend The sheet is bent to the programmed angle by bringing the punch to the required depth.
The control calculates the required Y-axis position to obtain the programmed angle.

bottoming The sheet is bent by pressing the sheet between the punch and the die.
The control assumes the bottom of the die as required Y-axis position.

hemming The sheet is folded in two. This is possible after the sheet has been bent into a sharp angle in a previous bend. The control calculates the precise Y-axis position for this action: the surface of the die plus twice the sheet thickness.
Y-axis positioning can be adjusted by programming a 'hem opening'.

hemming & The same as hemming, but now the control assumes the top of the die as required Y-axis position. The folded sheet is pressing
Bottoming between punch and die.


For more details, please kindly mail us for Hydraulic Press Brake







 

You Might Also Like