I.Product Features:
CM-IR D010/IRD110 is a safety isolation standard 0/1-10 V intelligent dimming controller, using the current state-of-the-art PWM (pulse width modulation) digital brightness adjustment technology, used to control all kinds of dimmable LED drive and dimmable electronic ballast with 0/1-10 as dimming signal to realize brightness adjustment of LED lamps. Support manual knob stepless adjust brightness, also support wireless remote dimming and switch with infrared remote control, dimming range 1-100%,0 off, with brightness hot key (25%,50%,75%,100%) and 1-4 hours timing function.



II.Technical specifications:
1. maximum switching load power :110 V 1000W ,220V 2000W
2. supply voltage :100-240 Vac frequency :50/60 Hz
3. output circuit :2-way parallel synchronous adjustable
4. safety isolation circuit is used to protect the load from voltage fluctuation.
10A5. belt relay design:, achieve reliable turn off (complete turn off).
6. effective dimming signal current :≤250 mA
7. adjustment voltage :0.5-10 V ,0V lights off
8. dimming range :1-100% stepless dimming, no stroboscopic
9. output voltage: optional standard 0-10 V or 1-10 V signal (default 0-10 output)
10.100% Compatible with standard 0/1-10 V dimmer driver on the market, special features can be customized according to customer requirements
11.With indicator light, red light indicates off/standby, red light indicates normal operation, red light flashing indicates receiving instruction during remote control operation
12. Support a variety of controls (knobs, infrared remote controls) to meet different usage habits
13. Standard 86 panels, size 86*86 mm
14. Remote control specifications:
Standby current :<=2 uA
Remote control distance: greater than or equal to 10 meters in the case of no dry deflection, need to control against the dimmer
Dimensions :86*40*7(mm)

III.Directions:
Description: First connect the load and signal line, then connect the AC input line, ensure that there is no short circuit between the connection lines before power on.

1. N zero line, shared
2. L IN input to fire line
3. The L OUT is the output of the fire line, connected to the input L end of the 0-10 V dimming drive
4. dimmer signal output ,0 V for the common end, two channels 10 V adjustable signal, can be arbitrarily connected to one of them
5. When the first power or power off after the call again, the default is to turn off the lights state, press the remote control to turn on the lights or turn on the lights, the purpose of this design, to prevent sudden power failure, people leave after the call, lamps for always light state, neither safe nor waste of energy.