1. Application:

It is suitable for the inner and outer wall surface blasting treatment of various gas cylinders, such as water heater, liquefied gas cylinder, acetylene cylinder, oxygen cylinder, fire extinguisher cylinder, so that it can obtain a certain roughness of bright surface, in order to increase the adsorption capacity of coating, ensure the quality of coating, it is the first choice equipment for cylinder manufacturing and cylinder detection.

2. Features:

1). The equipment is highly efficient, and the surface cleanliness of the workpiece after cleaning reaches the national standard GB8923-88 Sa2.5.

2). The use of a number of domestic and foreign advanced technology, improve the technical content of each functional parts, so that the machine will run for a long time without failure, high opening rate.

3). The whole machine has good sealing effect and can meet the environmental requirements of purification environment.

A. acuities were 85 db noise

B. Dust concentration emission standard < 100mg/m3

     Dust concentration in the workplace < 2mg/m3

3. The working principle

When the machine is working, after the preparation (dust removal system, separator hoist, screw conveyor, etc.) is completed, the machine starts to work normally. First of all, the electric hoist in chamber in vitro the hoist with the workpiece, the workpiece into the clean room, when arrived at shot location, the door began to close, artifacts start rotation, open shot blasting machine, open for the pill brake, start to blast cleaning of artifacts, clean up after a period of time, shut down for the pill gate, close shot blasting machine, close the dust removal system, open the door, the workpiece will unload hoisted out Chambers. Repeat the above process until the work is finished, and stop the machine in order.

4. Main Technical Data
5. LPG Cylinder Production Flow Chart




6. Company Introduction



Established in 1983, Taizhou Yuehai Manufacturing Co., Ltd is the earliest private manufacturing company, specializing in design, manufacturing, sales of LPG Cylinder Production & Re-validation Line in China.

With more than 30 years' development, the products manufactured by Taizhou Yuehai are not only sold well in China, but also exported to more than 20 countries, such as Egypt, Kenya, Uganda, Libya, the Sudan, Nigeria, Iran, The philippines, Vietnam, Malaysia, Indonesia, Bangladesh, Guatemala, Cuba, and so on.

Our value is to provide high- quality products to our demestic and overseas cleants.

Our business principle is to hour our contract and keep our promise.

7. Our Company



8. Production Machines



9. Certificate and Patent



10. Our Advantages
 
  <> Manufacturer of complete LPG cylinder production line
  <> Detailed pre-sales consultation
  <> Factory visit available
  <> Machines demonstration
  <> Reasonable configuration and economical cost
  <> Fast delivery
  <> On-site installation and training 
  <> Help with trial production
  <> Fast after-sales technical support
  <> Fast spare parts delivery
  <> Fast dies supply
  <> Logo and colors of machine can be customized

11. Overseas Installations



12. Main Clients' Workshop



13. Clients' Products



14. Please provide the following information for quotation:

<> Technical drawing of cylinders you plan to produce-----We need to know about the manufacturing process for the enconomical machine configuration.

<> Have you got any machines in your workshop? -----To see if you need to purchase the complete production line

<> How many cylinders will you plan to produce in 8.5 hours? -----We will make the quotation according to your required production capacity.