UPVC Water Pipe Production Extrusion Line


MACHINE INTRODUCTION: 
GF Series plastic pipe production line is mainly used in the production of the plastic PVC pipes with various diameters and wall thickness in the applications of agricultural and constructional water supplying & draining, cable laying etc.


MACHINE FEATURES;
This Pipe Production Line is composed of the conical twin-screw extruder, vacuum forming table, tractor, cutter, turning rack, etc.
-The extruder and the tractor adopt imported AC frequency conversion device.
-The vacuum pump and traction motor are also of high quality.
-There are several traction modes such as two claws, three claws, four claws, six claws, etc.
-Saw cutting or planet cutting is selectable. Length recording and thickness increasing devices can be attached.




THIS LINE IS CONSIST OF 
1.      Twin Screw Extruder  with spring feeder            1 unit
2.      Mould                                                                  1 set
3.      Vacuum Cooling Water Tank                              1 unit
4.      Haul-off Machine                                                 1 unit
5.      Cutting Machine                                                   1 unit
6.      Stacker                                                                1 unit
Optional Auxiliary Machine;
1.      Crusher                                                               1 unit
2.      Mixer                                                                   1 unit
3.      Pulverizer                                                            1 unit
4.      Air Compressor                                                   1 unit 



MACHINE TYPE: 

TRADE TERMS
1.      Payment Term: 30% for prepayment by T/T, 70% for balanced payment by T/T, or L/C can be acceptable
2.      Delivery Time: 40 days after receipt of prepayment.
3.      Packing Method:  Packing film or wooden case
4.      Guaranteed Time:  12 months


MACHINE RUNNING TEST AND AFETER SERVICE
1.      When machine finished, we will invited client come to our factory to check the machine and do the machine test. If machine is ok, then client pay for the balance. And inspect machine load the container.
2.      When machine arrives client's factory, if client needs, we will send 1-2 engineer to client's factory do the machine installation and running test, and also train the local worker how to operate and maintain the machine. It is chargeable.
3.      If have any question or problem on machine operation or maintain, welcome to contact to us by email or calling. We stand by 24 hours. 


CONTACT INFORMATION:
Rita Gao
Qingdao Suke Machinery Co.,Ltd. 
Add: C02, The 2rd.Industrial Zone of Fuan, Jiaozhou,Qingdao,China. 
Tel: 0086-0532-87258779
Fax:0086-0532-87271067
Web: qdsuke.en.made-in-china.com 


COMPANY SHOW