1.25Gb/s SFP Optical Transceiver with DDMI Hot Pluggable, Duplex LC, +3.3V, 1310nm, FP-LD, Single-Mode, 20km

Features
                                           
Compliant with Specifications for IEEE802.3Z
Multi-Source Package with Duplex LC Connector
Up to 1.25Gb/s Data Links
Single Mode 1310nm FP-LD
Single +3.3V Power Supply
Hot-Pluggable
Compliant with Bellcore TA-NWT-000983
Eye Safety Designed to Meet Laser Class1, Compliant with IEC60825-1
RoHS Compliant Products

Applications

Gigabit Ethernet
1x Fiber Channel
Switch to Switch Interface
Switched Backplane Applications
Router/Server Interface
Other Optical Links

Specification

Electrical and Optical Characteristics: (Condition: Ta=TOP)

Transmitter Section

Absolute Maximum Ratings: (TC=25ºC)

Recommended Operating Environment

Timing Characteristics
         

Pin Description

Notes:
1). Circuit ground is internally isolated from chassis ground.
2). Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
3). Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls line
  low to indicate module is plugged in.
. LOS is open collector output. Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and
      3.6V.Logic 0 indicates normal operation; logic 1 indicates loss of signal.

Serial ID Memory Contents


Serial ID Memory Contents: (A2H)