SFP-10g-T Glc -T 30m SFP RJ45 Connector Fiber Optical Transceiver Module Compatible Cisco/H3c/Huawei/Juniper

China SFP-10g-T Glc-T 30m SFP RJ45 Connector Fiber Optical Transceiver Module Compatible Cisco/H3c/Huawei/Juniper, Find details about China SFP+ /10g-T Transceiver, 10g T RJ45 Transceiver from SFP-10g-T Glc-T 30m SFP RJ45 Connector Fiber Optical Transceiver Module Compatible Cisco/H3c/Huawei/Juniper

Model NO.
SFP+/10G-T
Trademark
TELEFLY or OEM
Origin
China Shenzhen
HS Code
8517622910
Model NO.
SFP+/10G-T
Trademark
TELEFLY or OEM
Origin
China Shenzhen
HS Code
8517622910

SFP-10g-T Glc-T 30m sfp RJ45 Connector fiber optical transceiver module compatible  Cisco/H3c/Huawei/Juniper
SFP-10g-T Glc-T 30m SFP RJ45 Connector Fiber Optical Transceiver Module Compatible Cisco/H3c/Huawei/Juniper
10GBASE-T Copper SFP+ Transceiver
SFP+-10GBASE-T
SFP+10G-T Overview


SFP10-T-C10 SFP+ 10GBASE-T is high performance and high speed copper transceiver module over Cat 6a/7 cable with a link of 30m, and it also supports 10/100/1000/2500/5000Base-T application. The benefit is that it uses standard-based technology with the familiar RJ45 connector and provides backward compatibility with legacy networks.

Product Features

• Supports 10GBase-T using 30m Cat 6a/7 Cable
• Supports 5000Base-T using 50m Cat 5e cable or better
• Supports 2500Base-T using 75m Cat 5e cable or better
• Supports 10/100/1000Base-T using 100m Cat 5e cable or better
• Compliant with IEEE 802.3az • Compliant with SFF-8431 and SFF-8432 MSA
• Low Power Consumption (2.5W MAX @ 30m)
• Auto-negotiates with other 10GBase-T PHYs
• I2C 2-Wire Interface for Serial ID and PHY Register Access
• Auto-sense MDI/MDIX
• RoHS Compliant
• Operating temperature range:0ºC to70ºC


Applications:
  • Gigabit Ethernet 
  • Switch/Router to Switch/Router Link
  • High speed I/O for file severs

Description:

SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA) . They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3 . SFP+-10GBASE-T uses the SFP's RX_LOS(must be pulled up on host) pin for link indication. If pull up or open SFP's TX_DISABLE pin, PHY IC be reset.
Applications
• 10 Gigabit Ethernet

Ordering Information
Part NumberDescription
SFP+10G-T10/100/1000/2500/5000/10GBase-T SFP+ Copper RJ-45 Connector
For More Information:
SfpCodingBox (Dongguan) Limited
Web: sztelefly.en.made-in-china.com
 

General Specifications
 
ParameterSymbolMinTypMaxUnitRemarks
Data RateDR 10 Gb/s1
Bit Error RateBER  10−12   
Operating TemperatureTOP0 70ºC2
Storage TemperatureTSTO−40 85ºC3
Supply CurrentIS 700750mA4
Input VoltageVCC3.143.33.46V 
Maximum VoltageVMAX  4V4
Surge CurrentIsurge  30mA6

Notes:
1. IEEE 802.3ae
2. Case temperature
3. Ambient temperature
4. For electrical power interface
5. Referenced to GND
6.Hot Plug above steady state current

Dimensions
SFP Module SFP-10g-T SFP+ RJ45 Copper 30m Optical Transceivers Modules
           ALL DIMENSIONS ARE ±0.2mm UNLESS OTHERWISE SPECIFIED
                                                         UNIT: mm

Electrical Pad Layout

SFP Module SFP-10g-T SFP+ RJ45 Copper 30m Optical Transceivers Modules

Pin Assignment

 
PIN #Symbol DescriptionRemarks
1VEETTransmitter ground (common with receiver ground)1
2TFAULT Transmitter Fault. Not supported 
3TDISTransmitter Disable. PHY disabled on high or open2
4SDA2-wire Serial Interface Data Line3
5SCL2-wire Serial Interface Clock Line3
6MOD ABSModule Absent. Grounded within the module3
7RS0No Connection Required 
8LOSLoss of Signal indication. Logic 0 indicates normal operation. 
9RS1No Connection Required 
10VEERReceiver ground (common with transmitter ground)1
11VEERReceiver ground (common with transmitter ground)1
12RD-Receiver Inverted DATA out. AC coupled 
13RD+Receiver Non-inverted DATA out. AC coupled 
14VEERReceiver ground (common with receiver ground)1
15VCCR Receiver power supply 
16VCCTTransmitter power supply 
17VEETTransmitter ground (common with receiver ground)1
18TD+Transmitter Non-Inverted DATA in. AC coupled 
19TD-Transmitter Inverted DATA in. AC coupled 
20VEETTransmitter ground (common with receiver ground)1

Notes:
1.Circuit ground is connected to chassis ground
2.Disabled: TDIS>2Vor open, Enabled: TDIS<0.8V
3.Should Be pulled up with 4.7k -10k ohm on host board to a voltage between 2V and 3.6V
Company Profile
TELEFLY Telecommunications Equipment Co., Ltd. is a leading Chinese manufacturer founded in 2004, certified by SGS. We provide high quality and price competitive fibre optic cable, fibre optic patch cords, fibre optic patch panels, FTTH equipments, fibre optique patch panels, optical splitters, WDM, optical attenuators, fast connectors ,Ethernet switch ,SFP transceiver and so on. Up till now, our products and solutions have been deployed in over 60 countries and regions, TELEFLY is looking forward to strengthening friendly cooperative relationships with all clients, creating benefits together and sharing the joy of success!
SFP-10g-T Glc-T 30m SFP RJ45 Connector Fiber Optical Transceiver Module Compatible Cisco/H3c/Huawei/JuniperSFP-10g-T Glc-T 30m SFP RJ45 Connector Fiber Optical Transceiver Module Compatible Cisco/H3c/Huawei/Juniper
SFP-10g-T Glc-T 30m SFP RJ45 Connector Fiber Optical Transceiver Module Compatible Cisco/H3c/Huawei/Juniper

Why you choose TELEFLY be one of your partner?
1.Customer get satisfied quality and service with competitive price and punctual delivery.
2.OEM service with 13-year experiences, free samples are available.
3.Prompt answer for any question and inquiry in the shortest time.
4.Factory directly,reduce your cost and save time.


Cerfifications Showing
SFP-10g-T Glc-T 30m SFP RJ45 Connector Fiber Optical Transceiver Module Compatible Cisco/H3c/Huawei/Juniper

Our Exhibition
SFP-10g-T Glc-T 30m SFP RJ45 Connector Fiber Optical Transceiver Module Compatible Cisco/H3c/Huawei/Juniper

Professional packing and transportation

SFP-10g-T Glc-T 30m SFP RJ45 Connector Fiber Optical Transceiver Module Compatible Cisco/H3c/Huawei/Juniper