China 24nm Modulating Electric Motor for HVAC System Damper Actuator, Find details about China Damper Actuator, Electric Control Damper Actuator from 24nm Modulating Electric Motor for HVAC System Damper Actuator
Torque 08-16-24NM
2 or 3 points control or Modulating
Actuator and damper shaft are bolt-on by screw.
Maximum round shaft φ16 and square shaft 12*12mm.
Direction of rotation can be setting.
Manual Override
With 2 auxiliary switches are optional
Power supply AC/DC 24V or AC 230V
Item | Unit | S6061-08DN(F) | S6061-16DN(F) | S6061-24DN/(F) |
Torque | Nm | 8 | 16 | 24 |
Damper area | m2 | 2 | 4 | 6 |
Running time | sec | 30~40 | 72~88 | 117~143 |
Power supply | V | 24VAC/DC;220VAC;110VAC | ||
Frequency | Hz | 50/60Hz 7.5W 50/60Hz | ||
Running consumption | W | 3.9W(24V);4.8W(230V) | ||
Maintaining consumption | W | 0.4W(24V);1.2W(230V) | ||
Weight | Kg | 1.25 | ||
Control signal | 2/3 point | |||
Position signal | 2 auxiliary switches | |||
Rotation angle | 0~90º(max 93°) | |||
Limited angle | 5~85º(per step 5º) | |||
Auxiliary switch rating | 3(1.5)Amp 250V | |||
Life cycle | >70000 cycles | |||
Noise level | 45dB(A) | |||
Protection level | IP44 or IP54 | |||
Ambient Temperature | -20~+50ºC | |||
Ambient Humidity | 5~95%RH | |||
Storage temperature | -40~+70ºC | |||
Certification | CE UL(Except 230V) |
The damper actuator can be controlled by 2 or 3 point.
There are 2 auxiliary switches of the actuator, and you can set the angle 0-90° (the factory sets a is 10° and b is 80°). It will output a on/off signal when the actuator rotates the setting angle.
The direction of rotation changes according to the direction of pin.