Basic Info.

Trademark

RYDMET CARBIDE

Origin

China

HS Code

82090030

Trademark

RYDMET CARBIDE

Origin

China

HS Code

82090030

Product Desciption

 

 
 

The Introduction of the cemented Tungsten Carbide Components, Wear Parts.

 Tungsten Carbide or Hardmetal is really a kind of alloy that give you surprise, after so many years of innovation, many grades were developed to cater to the demand of many Industries.



Thanks to so many years of experience and the high accuracy of our machines, we are now almost able to make any types of Carbide Components ( wear Parts) we meet, they have started to reply on Rydmet Carbide's Carbide Wear Comnponents and Wear Parts.


We like to provide the professional solutions for our clients through the satisfied products and service.

Besides the traditional Carbide Seal Faces,Rings, Sleeves, Bushings, Nozzles,Valve Part, Balls, our Engineering Team are always willing to challenge themselves in making irregular Carbide Components and Parts.

The following is some of our Tungsten Carbide Components/Wear Parts we make usually, usually:


• Tungsten Carbide Bushings

• Carbide Sleeves for centrifugal pump

•Tungsten Drill Guide

Carbide Mechanical Sea Faces

Carbide Shaft Sleeves

Carbide Plugs

Carbide Valve Balls.

•Tungsten Carbide Valve Seats and Stems

• Tungsten Carbide Oil and Natural Gas Wear Parts and Components

• Tungsten Carbide Nozzles

• Tungsten Carbide High Pressure Pump Components

• Tungsten Carbide for -Flow Restrictors

• Centrifugal Pump Components

• Centrifugal Carbide Wear Tiles

•  Carbide Wear Parts for Choke Valve, Grate Valve, Control Valve..etc.


we also make the Carbide  irregular carbide components from our clients that we can not name and don't know what is the application at all.




According to the specific Application, the Carbide Wear Parts, Components can be available in Cobalt and Nickel binded Grade and special prepared Grades, which can almost solve all the wear or erosion problems we are facing.    

Rydmet Standard  Carbide  Grade Chart for Wear Parts, Components
Grade Code	Binder Content & Type	Hardness (Ra)	Hardness	Density (g/cm3)	Transverse Rupture Strength (TRS)	Grain Size
			(HV30)
RD06X	6% Co	91.5	1530	14.95	2,300	Fine
RD08X	8% Co	90.8	1450	14.75	2,500	Fine
RD15X	15% Co	88.9	1250	13.9	2,700	Fine
RD06M	6% Co	90.3	1380	14.95	2500	Medium
RD08M	8% Co	89.5	1300	14.75	2600	Medium
RD011M	11% Co	89.2	1270	14.3	2,650	Medium
RD015M	15% Co	87	1070	14.0	2,650	Medium
RD06S	6% Co	93	1790	14.95	2,600	Submicron
RD10S	10% Co	91.8	1580	14.45	2,650	Submicron
RD10C	10% Co	88	1160	14.5	2,700	Coarse
FC11C	11% Co	87.5	1110	14.45	2,800	Coarse
RD06N	6% Ni	90	1350	14.9	1,800	Medium
RD08N	8% Ni	88.5	1700	14.7	1,900	Medium
RD10N	10% Ni	88	1160	14.5	1,930	Medium
RD12N	12% Ni	87.5	1110	14.1	1,950	Medium
RD06N2	6% Ni+Cr	89	1250	14.2-14.9	1,600	Medium
RD08N2	8% Ni+Cr	88.5	1210	14.0-14.8	1,700	Medium
RD06UF	6% Co	94	2010	14.9	3,800	Ultra-fine

 
* Cutstom Sizes are also acceptable.