Products

Russian Standard GOST5762 Bolted Bonnet Stellite Trim Renewable Seat Flange End Flexible Wedge Gate Valve

China Russian Standard GOST5762 Bolted Bonnet Stellite Trim Renewable Seat Flange End Flexible Wedge Gate Valve, Find details about China GOST Gate Valve, Russian Standard Valve from Russian Standard GOST5762 Bolted Bonnet Stellite Trim Renewable Seat Flange End Flexible Wedge Gate Valve

Model NO.
GOST
Actuator
Manual
Seal Surface
Wedge Gate Valve
Thread Position of Valve Rod
Outside Gate Valve
Usage
Regulation, Safety, Emptying, Drain, Temperature Control, Flow Control
Standard
GOST
Application
Industrial Usage, Water Industrial Usage, Household Usage
Bonnet
Bolted Bonnet, Pressure Seal, Welded Bonnet
Wedge
Solid, Flexible Wedge;Single Wedge, Double Wedge
Seat
Renewable Seat, Back Seat
Stem
OS&Y, Rising Stem, Non Rising Stem
Cryogenic Service
Extended Bonnet for Cryogenic Services
Design
GOST5762-2002
Bore
Full Port Design, Regular Bore Design
Connection
Flanged or Butt-Welding End
Operation
Hand Wheel, Bevel Gear, Pneumatic, Electric
Special
by Pass on Request, Nace Mr-0175
Trademark
O. E. M or AEA Brand
Transport Package
Plastic+Wooden Case
Specification
1500*1500*2000mm
Origin
China
HS Code
848180
Model NO.
GOST
Actuator
Manual
Seal Surface
Wedge Gate Valve
Thread Position of Valve Rod
Outside Gate Valve
Usage
Regulation, Safety, Emptying, Drain, Temperature Control, Flow Control
Standard
GOST
Application
Industrial Usage, Water Industrial Usage, Household Usage
Bonnet
Bolted Bonnet, Pressure Seal, Welded Bonnet
Wedge
Solid, Flexible Wedge;Single Wedge, Double Wedge
Seat
Renewable Seat, Back Seat
Stem
OS&Y, Rising Stem, Non Rising Stem
Cryogenic Service
Extended Bonnet for Cryogenic Services
Design
GOST5762-2002
Bore
Full Port Design, Regular Bore Design
Connection
Flanged or Butt-Welding End
Operation
Hand Wheel, Bevel Gear, Pneumatic, Electric
Special
by Pass on Request, Nace Mr-0175
Trademark
O. E. M or AEA Brand
Transport Package
Plastic+Wooden Case
Specification
1500*1500*2000mm
Origin
China
HS Code
848180
Russian Standard GOST5762 Bolted Bonnet Stellite Trim Renewable Seat Flange End Flexible Wedge Gate Valve
AEA GOST 5762 Cast Steel Gate Valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar. The gate faces can form a wedge shape or they can be parallel. Typical gate valves should never be used for regulating flow, unless they are specifically designed for that purpose. On opening the gate valve, the flow path is enlarged in a highly nonlinear manner with respect to percent of opening.
Russian Standard GOST5762 Bolted Bonnet Stellite Trim Renewable Seat Flange End Flexible Wedge Gate Valve
Product Range
-Valve size: 
2" ~ 48" (DN50-DN1200)
-Pressure:
PN10,PN16,PN25,PN40,PN64,PN100,PN160,PN250
-Temperature: 
-196ºC~ 500ºC
-Body Materials:
Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel
-Trim (Disc/Stem):
Carbon Steel, Stainless Steel, Duplex Steel, Alloy Steel
Russian Standard GOST5762 Bolted Bonnet Stellite Trim Renewable Seat Flange End Flexible Wedge Gate Valve
Technical Specifications   
-Design: GOST 5762-2022
-Face to Face: GOST 3706-93
-End Flange: GOST 12815-80
-Test: GOST 356-80
-Special: NACE MR-01-75
Russian Standard GOST5762 Bolted Bonnet Stellite Trim Renewable Seat Flange End Flexible Wedge Gate ValveRussian Standard GOST5762 Bolted Bonnet Stellite Trim Renewable Seat Flange End Flexible Wedge Gate ValveRussian Standard GOST5762 Bolted Bonnet Stellite Trim Renewable Seat Flange End Flexible Wedge Gate Valve

Russian Standard GOST Gate Valve Py160  30с41нж  30с64нж 30с15нж 30с76нж 30с45нж

Задвижки

PN 10
Задвижка чугунная 30ч6бр (DN 50-400)
Задвижка чугунная 30ч906бр (DN 100-500)
Задвижка чугунная 30ч915бр (DN 500-1200)
PN 10 - 16
Задвижка чугунная 30ч39р (DN 50-600)
Задвижка чугунная 30ч539р с редуктором (DN 350-800)
Задвижка чугунная 30ч939р под электропривод (DN 50-800)
PN 16
Задвижка стальная 30с41нж (DN 50-400)
Задвижка стальная 30с541нж с редуктором (DN 350-1200)
Задвижка стальная 30с941нж под электропривод (DN 50-1200)
Задвижка стальная 30лс41нж ХЛ (DN 50-400)
Задвижка стальная 30лс941нж ХЛ с редуктором (DN 50-600)
Задвижка нержавеющая 30нж41нж (DN 50-400)
Задвижка нержавеющая 30нж941нж (DN 50-800)
PN 25
Задвижка стальная 30с64нж (DN 50-400)
Задвижка стальная 30с564нж с редуктором (DN 400-1200)
Задвижка стальная 30с964нж под электропривод (DN 50-1200)
Задвижка стальная 30лс64нж (DN 50-500)
Задвижка стальная 30лс564нж с редуктором (DN 500-700)
Задвижка стальная 30лс964нж под электропривод (DN 50-500)
Задвижка нержавеющая 30нж64нж (DN 50-300)
Задвижка нержавеющая 30нж964нж (DN 50-300)
PN 40
Задвижка стальная 30с15нж (DN 50-400)
Задвижка стальная 30с515нж с редуктором (DN 50-400)
Задвижка стальная 30с915нж под электропривод (DN 50-400)
Задвижка стальная 30лс15нж (DN 50-350)
Задвижка стальная 30лс915нж под электропривод (DN 50-350)
Задвижка нержавеющая 30нж15нж (DN 50-400)
Задвижка нержавеющая 30нж915нж (DN 50-700)
PN 63
Задвижка стальная 30с76нж (DN 50-300)
Задвижка стальная 30с576нж с редуктором (DN 250-400)
Задвижка стальная 30с976нж под электропривод (DN 50-400)
Задвижка стальная 30лс76нж (DN 50-250)
Задвижка нержавеющая 30нж76нж (DN 50-300)
PN 160, 250
Задвижка стальная 31с45нж (DN 50-150)
Задвижка стальная 31с545нж (DN 150-250)
Задвижка стальная 31с945нж (DN 50-250)
Задвижка стальная 31лс45нж (DN 50-150)
Задвижка стальная 31лс545нж (DN 150-250)
Russian Standard GOST5762 Bolted Bonnet Stellite Trim Renewable Seat Flange End Flexible Wedge Gate Valve
Technical Specifications:
(1) Design Standard: GOST 5762-2002
(2) Face to Face Dimension: GOST 3706-93
(3) End Flange Dimension: GOST 12815-80
End BW Dimension: GB/T 12224
(4) Structures: Straight Pattern
(5) Material of Body: GS-C25, S.S 304, S.S 316
(6) Pressure Rating: PN16, PN25, PN40, PN63,PN160
(7) Test standard: GOST356-80
Russian Standard GOST5762 Bolted Bonnet Stellite Trim Renewable Seat Flange End Flexible Wedge Gate Valve
Feature: 
- Straight pattern
- Outside Screw and York
- Bolted bonnet
- Seat in stellite or 13%Cr
- Available with gear operator
- Flange Ends
- Butt-welding Ends
Actuation: can operate with lever, gear box, pneumatic or electric actuator with handwheel for emergencies
Medium: The valve is suitable for several media including water, steam, oil, gas, petrol products, nitric acid, acetic acid, etc.
Working temperature: from -46oC or -50oC (stainless steel constructions) and -29oC (carbon steel constructions) up to 600ºC

Russian Standard GOST5762 Bolted Bonnet Stellite Trim Renewable Seat Flange End Flexible Wedge Gate Valve
PART I 

GATE VALVES 

 

Steel wedge gate valves, rising stem
DN15 mmPN16, 25, 40, 63, 160 kg/cm2
DN20 mmPN16, 25, 40, 63, 160 kg/cm2
DN25 mmPN16, 25, 40, 63, 160 kg/cm2
DN32 mmPN16, 25, 40, 63, 160 kg/cm2
DN40 mmPN16, 25, 40, 63, 160 kg/cm2

Gate valves are made of steel grades: 20, 20Л, 09Г2С, 20ГЛ, 12Х18Н10T, 12Х18Н9TЛ, 10Х17Н13M2T, 12Х18Н12M3TЛ; flanged, socket joining, welding, hand-operated (with flywheel).

Russian Standard GOST5762 Bolted Bonnet Stellite Trim Renewable Seat Flange End Flexible Wedge Gate Valve
PART II 

GATE VALVES 

Steel wedge gate valves flanged, rising stem 
 
DN50 mmPN16, 25, 40, 63, 160 kg/cm2
DN80 mmPN16, 25, 40, 63, 160 kg/cm2
DN100 mmPN16, 25, 40, 63, 160 kg/cm2
DN125 mmPN16 kg/cm2
DN150 mmPN16, 25, 40, 63, 160 kg/cm2
DN200 mmPN16, 25, 40, 63, 160 kg/cm2
DN250 mmPN16, 25, 40, 63, 160 kg/cm2
DN300 mmPN16, 25, 40, 63, 160 kg/cm2
DN400 mmPN16, 25, 40 kg/cm2
DN500 mmPN16 kg/cm2

Gate valves are made of steel grades: 20Л, 20ГЛ, 12Х18Н9TЛ , 12Х18Н12M3TЛ, with flange, with manual control (with flywheel) or performance under actuator.

Russian Standard GOST5762 Bolted Bonnet Stellite Trim Renewable Seat Flange End Flexible Wedge Gate Valve
PART III 

Gate valves with а rubber wedge 

Gate valves with а rubberized wedge with non-rising stem:
DN40 mmPN10, 16 kg/cm2
DN50 mmPN10, 16 kg/cm2
DN65 mmPN10, 16 kg/cm2
DN80 mmPN10, 16 kg/cm2
DN100 mmPN10, 16 kg/cm2
DN125 mmPN10, 16 kg/cm2
DN150 mmPN10, 16 kg/cm2
DN200 mmPN10, 16 kg/cm2
DN250 mmPN10, 16 kg/cm2
DN300 mmPN10, 16 kg/cm2
DN350 mmPN10, 16 kg/cm2
DN400 mmPN10, 16 kg/cm2
DN450 mmPN10, 16 kg/cm2
DN500 mmPN10, 16 kg/cm2
DN600 mmPN10, 16 kg/cm2


Gate valves are made of steel and cast iron grades 20Л СЧ 25, ВЧ 40, with flange, PE (polyethylene) nozzles, welding, hand-operated (with flywheel) or performance under actuator. 
 

I Gate valves 

Gate valves are shut off devices, in which the channel is covered by the translational movement of the lock body in a direction perpendicular to the flow of the transported medium. Gate valves are used to block flow of gaseous or liquid media in the pipeline at various pressures and nominal (conventional) passes.
Body parts are manufactured as a method of molding and stamping.
Low hydraulic resistance valves (the drag coefficient of less than 0.5) makes them particularly valuable when applied to pipelines, which are constantly moving through a medium with great speed.
Execution valves closing element - a solid wedge. They fall into the valve with a solid wedge and double disc.
Seal in the gate from both the action on the wedge medium pressure (pressure difference before and after the gate), and additional efforts wedge. 
Gate valves are manufactured with a rising stem (threaded spindle and nuts are running out).
Connection to pipe flanges, clutch, welding. Optionally flange may be any according to GOST 12815-80. By default, run on the flange PN ? 16 - version 1, PN 25, 40 - version 2 (by special order PN 25 - Version 3), PN 63, 100, 160 - Version 7 to GOST 12815-80 series 2.
Construction in accordance with GOST 3706-83 length.
Tightness of the gate according to GOST 9544-2005.
Management of manual valves (handwheel).
Operating position of valves in a horizontal pipe or flywheel drive up (a deviation of 45 ? in either direction) on the vertical - any.
Direction of the medium in the valve - on either side of the main aisles.
Catches of steel grades can be made four versions:
- Steel 20 or 20Л;
- Steel 09Г2С or 20ГЛ;
- Steel or 12Х18Н10T 12Х18Н9TЛ;
- Steel or 10Х17Н13M2T 12Х18Н12M3TЛ.
The required performance of selected operating conditions, aggressive working medium temperature.
Missing data in the catalog are available upon request of the consumer.

OKП code 3741 Production and delivery TУ 3741-001-68142220-2010 


They are made with flanged, socket joining, welding to the pipeline. Mounting flange dimensions according to GOST 12815-80, version 1, row 2 (the default). 
In the valves used a solid wedge.
Tightness of the gate according to GOST 9544-2005 Class A and B.
Gland packing - stuffing. In the upper position of the spindle has a seal on the conical surface of the lid.
Management manual valve (handwheel).
When ordering, specify: product name, the parameters of the working environment, nominal size (orifice) (DN), nominal (conventional) pressure (PN), product designation, the performance of the material, the need for additional testing.
Example for ordering (and other documentation) gate valve DN 15 mm PN 40 kg/cm2 steel 09Г2С:
Wedge gate valve ЗКЛ 15-40-01 DN 15 mm PN 40 kg/cm2 30лс15нж. 

Attention! Valve, designed for gaseous, explosive and toxic environments, additionally tested after hydro air. When ordering, please make a note: "gas". 

Basic information and information given at the beginning of the section. 

The choice of application design, material and hull wetted parts depends on the aggressiveness of the medium, temperature, pressure, and working conditions, as well as customer requirements. 

Missing data in the catalog are available upon request of the consumer. 
Steel wedge gate valves with rising stem PN 16 - 160

II Steel wedge gate valves, flanged, rising stem 

Gate valves are shut off devices, in which the channel is covered by the translational movement of the lock body in a direction perpendicular to the flow of the transported medium. Gate valves are used to block flow of gaseous or liquid media in the pipeline at various pressures and nominal (conventional) passes.
Low hydraulic resistance valves (the drag coefficient of less than 0.5) makes them particularly valuable when applied to pipelines, which are constantly moving through a medium with great speed.
On execution of the valve body is usually made full bore, ie diameters of the holes in the valve passages are not narrow. In some instances, narrowed valve in which the diameters of the holes in the hull narrowed. This reduces the effort and torque control systems, as well as reduced dimensions and weight, but it increases the hydraulic resistance. Aligned with a narrowed valve passage marked in the catalog with the letter "У" after the designation of nominal (nominal diameter).
Execution valves closing element - wedge. They fall into the valve with a solid wedge and double disc.
Seal in the gate from both the action on the wedge medium pressure (pressure difference before and after the gate), and additional efforts wedge. Because of this wedge gate valves (especially the double-disk) have a significantly higher degree of integrity than the parallel (in which the seal in the working body is mainly due to the pressure drop in it). They should be used when operating conditions are close to the maximum limit.
Gate valves are manufactured with a rising stem (threaded spindle and nuts are running out).
Connection to the pipeline flange. Optionally flange may be any according to GOST 12815-80. By default, run on the flange PN ? 16 - version 1, PN 25, 40 - version 2 (by special order PN 25 - Version 3), PN 63, 100, 160 - Version 7 to GOST 12815-80 series 2.
Construction in accordance with GOST 3706-83 length.
Tightness of the gate according to GOST 9544-2005.
Office of valves can be manual (handwheel) or from the actuator in a normal or explosion-proof design.
Operating position of valves in a horizontal pipe or flywheel drive up (a deviation of 45 ? in either direction) on the vertical - any. When you install a pipeline to provide additional support for electric drive.
Direction of the medium in the valve - on either side of the main flange.
Catches of steel grades can be made four versions:
- Steel 20Л;
- Steel 20ГЛ;
- Steel 12Х18Н9TЛ
- Steel 12Х18Н12M3TЛ.
The required performance of selected operating conditions, aggressive working medium temperature.

III Gate valves with а rubber wedge 

Gate valves are shut off devices, in which the channel is covered by the translational movement of the lock body in a direction perpendicular to the flow of the transported medium. Gate valves are used to block flow of gaseous or liquid media in pipelines at various pressures and nominal (conventional) passes. 
Low hydraulic resistance valves (the drag coefficient of less than 0.5) makes them particularly valuable for use in pipelines and gas pipelines, through which the constantly moving environment with great speed.
On execution of the valve body is made full bore, ie diameters of the holes in the valve passages are not narrow.
Execution valves closing element - rubberized wedge to create the absolute integrity.
Seal in the gate from both the action on the wedge medium pressure (pressure difference before and after the gate), additional efforts and wedge sealing rubber coating of the wedge. Because of this valve with rubber-wedge has a very high degree of integrity, but they should be used when workers are non-aggressive environment used to cover the rubber wedge and the ambient temperature does not exceed 120 ? C.

OKП code 3721 Production and delivery TУ 3721-001-68142220-2010 


They are manufactured with flange, PE caps to weld. Flange according to DIN 2501 or the customer's request GOST 12815-80 (version 1, row 2). 
In the valves used rubberized wedge.
Tightness of the gate according to GOST 9544-2005 Class A.
Gland packing - stuffing. In the upper position of the wedge has a seal on the cylindrical surface of the lid.
Management manual valve (handwheel) or under the actuator.
When ordering, specify: product name, the parameters of the working environment, nominal size (orifice) (DN), nominal (conventional) pressure (PN), product designation, the performance of the material, length (L), the need for additional testing.
Example for ordering (and in other documents) with rubberized wedge gate valves DN 100 mm PN 16 kg/cm2 of cast iron construction ВЧ 40 and 300 mm long:
Wedge gate valve ЗКМ 100-16-01 DN 100 mm PN 16 kg/cm2 30вч39р, length L = 300 mm.
Attention! Valve, designed to transport by pipeline protection PE, designed to work with an operating pressure P of 4 kg/cm2.
Valve, designed for gaseous, explosive and toxic environments, additionally tested after hydro air. When ordering, please make a note: "gas". 

Basic information and information given at the beginning of the section. 

The choice of application design, material and hull wetted parts depends on the aggressiveness of the medium, temperature, pressure, working conditions, adherence to the pipeline, as well as customer requirements. 

Missing data in the catalog are available upon request of the consumer.
Catches are made with non-rising stem (threaded spindle and nut running inside).
Connection to pipe flanges and polyethylene caps to weld. Optionally flange may be any according to DIN 2501 or GOST 12815-80 (version 1, row 2).
Building length according to GOST 3706-83 (DIN 3202).
Tightness of the gate according to GOST 9544-2005.
Office of valves can be manual (handwheel) or from the actuator in a normal or explosion-proof design.
Operating position of valves in a horizontal pipe or flywheel drive up (a deviation of 45 ? in either direction) on the vertical - any. When you install a pipeline to provide additional support for electric drive.
Direction of the medium in the valve - on either side of the main aisles.
Catches by Make-iron or steel can be produced three versions:
- Of cast iron СЧ 25;
- Cast iron ВЧ 40;
- Of steel 20Л.
The required performance is selected by the operating conditions and adherence to the pipeline.
Missing data in the catalog are available upon request of the consumer.
Russian Standard GOST5762 Bolted Bonnet Stellite Trim Renewable Seat Flange End Flexible Wedge Gate Valve


 

You Might Also Like