Products

Product Report of Submersible Centrifugal Aerator for Sewage Grit Chamber

China Product Report of Submersible Centrifugal Aerator for Sewage Grit Chamber, Find details about China Submersible Mixer, Submersible Aerator from Product Report of Submersible Centrifugal Aerator for Sewage Grit Chamber

Model NO.
QJB
HS Code
8421299090
Model NO.
QJB
HS Code
8421299090
Product report of submersible centrifugal aerator for sewage grit chamber
Brief description:
Submersible centrifugal aerator for sewage grit chamber
QXB centrifugal submersible aerator is of direct connection structure. The rotating impeller generates a centrifugal force in the water, which forms a negative pressure area around the impeller. The air is sucked in through the intake pipe, and the sucked air and water are mixed in the mixing plate, and then the good and uniform mixture is automatically ejected from around the outlet.
Application:
Submersible aerator is used in aeration tank, aerated grit chamber of sewage treatment plant, and also can be used in small sewage treatment plant. Industrial wastewater treatment and fish pond aeration.
Principle:
QXB centrifugal submersible aerator is of direct connection structure. The rotating impeller generates a centrifugal force in the water, which forms a negative pressure area around the impeller. The air is sucked in through the intake pipe, and the sucked air and water are mixed in the mixing plate, and then the good and uniform mixture is automatically ejected from around the outlet.
This process includes the following aspects: the air and water in the mixing plate mix to produce gas-liquid mixing effect, the gas-liquid mixture discharged from the outlet forms circulation and convection; the oxygen in a large number of air molecules moves at high speed to obtain a very high oxygen absorption efficiency.
characteristic:
1. High oxygen solubility, large proportion of tiny bubbles, high oxygenation efficiency and wide oxygenation area;
2. There is no dead zone in the pool, and the horizontal aeration with bubbles can completely wash every corner of the pool bottom;
The bearing with simple and compact structure, long unit life and able to bear heavy load adopts oil bath shaft sealing and suction
The air entering the impeller chamber prevents the water from contacting with the seal during operation, which ensures that the aerator can work continuously for 24 hours and operate without fault for a long time;
4. Save project investment, no need to provide air source, no blower, easy installation and low noise;
The submersible aerator is composed of submersible sewage pump, mixing chamber, base, intake pipe and muffler.
The upper end of the intake pipe is the air suction inlet, which is located above the water surface, and the lower end is connected with the mixing chamber. After the power is turned on, the impeller rotates, and the high-speed water flows out from the impeller outlet, forming a negative pressure through the mixing chamber, so the air is sucked in and mixed with the sewage, and the mixed liquid flows out from the outlet to complete the oxygenation of the sewage.
Product Report of Submersible Centrifugal Aerator for Sewage Grit Chamber

You Might Also Like