China CNC Punching Marking Notching and Cutting Machine for Angle, Find details about China CNC Angle Punching Machine, CNC Angle Line from CNC Punching Marking Notching and Cutting Machine for Angle
| No. | Item | YJX1412 |
| 1 | Total length | 29000mm |
| 2 | Quantity of feeding table | 4 group |
| 3 | Quantity of overturning tables | 4 group |
| 4 | Quantity of feeding driver | 1 group |
| 5 | Length of feeding passage | 16000mm |
| 6 | Length of the host | 2200mm |
| 7 | Length of finished passage | 10m |
| 8 | Pneumatic control system | 1 Group |
| 9 | Hydraulic control system | 1 Group |
| 10 | Feeding direction | According to user requirements |
| 11 | Integrated hydraulic station | No |
| 12 | The purchaser is responsible for the part | Embedded plates and anchor bolts required for the cement foundation and equipment of the installation site shall be prepared according to the foundation drawing provided by the supplier |
| 1 | Numerical Control System | PLC Control System |
| 2 | Driving System | Panasonic Servo Motor |
| No. | Item | Commodity |
| YJX1412 | ||
| 1 | Angle Beam Range(Mm) | 40*40*4-140*140*12 |
| 2 | Max Punching Diameter | Φ25.5mm(Q235,Q345), punching of special-shaped holes and oblong holes can be achieved by changing the mold |
| 3 | Max Punching force(KN) | 1000KN |
| 4 | Punching Side | 2 Sides |
| 5 | Number of die per side | 3 Pcs |
| 6 | Typing ability(KN) | 1030KN |
| 7 | Qty of typing groups | 4 Groups |
| 8 | Digit number of each group | 12 Pcs |
| 9 | Character size | (L*W*H)14*10*19mm |
| 10 | Shearing force(KN) | 2100KN |
| 11 | Shearing method | Single Blade shearing |
| 12 | CNC Axis | 3 Axis |
| 13 | Length of Blank Workpiece(M) | 12 M |
| 14 | Max Length of Workpiece(M) | 12 M |
| 15 | Length of finished workpiece(M) | 10 M |
| 14 | Discharging method of finished products | The finished material channel is pushed manually and turned out to one side. The power source for turning out is pneumatic. |
| 16 | Angle Beam feeding speed | Max 90m/min |
| 17 | Programming Mode | Input by keyboard,RS232,CAD floppy disk input &USB interface |
| 18 | Lubrication method | Equipped with automatic lubrication |
| 19 | Fabrication Precision | Hole diameter tolerance: 0-0.8mm |
| Dmax-Dmin:≤1.2mm Aperture roundness tolerance range: Dmax-Dmin: ≤1.2mm | ||
| Hole perpendicularity error: ≤0.36mm | ||
| Distance tolerance of two adjacent holes in the same group: ±0.5mm | ||
| The hole distance tolerance of two non-adjacent holes in the same group: ±0.7mm | ||
| End distance tolerance : ±1.2mm | ||
| Shearing length tolerance: ±1mm | ||
| Verticality of cut surface: ≤1.2mm |
| 1 | Power Supply | 3 Phase-4 Wire system |
| 2 | Voltage | 415V±10% |
| 3 | Frequency | 50Hz |
| 4 | Operating temperature | 0ºC-40ºC |
| 5 | Relative Humidity | <90% No condensation |
| 6 | Air Compressed | Pressure: 0.8MPa Flow rate: 1.0m³/h |
| Commodity of Main Parts | Images & Photos | Detailed introduction |
| Feeding Channel | Application: Rail of feeding material. Components: Supporting rectangular tube, rack, linear guide, conveyor roller, etc. (YJX1616) are driven by dual linear guides, and the rest are driven by single linear guides) | |
| Feeding trolley | Application: Feeding raw materials into the host machine for processing along the feeding channel. Drive mode: Panasonic servo motor driving. Transmission mode: precision gear, rack, linear guide, and servo high-precision positioning transmission. | |
| Typing unit | Application: Used to stamp the outside of one limb of the angle beam profile. The typing body is a frame body with good rigidity. In order to satisfy the processing range of the machine with add a manual adjustment mechanism, which can be used to change the down position (The head position) of the moving body to adapt to the typing position of angles of different specifications. | |
| Punching unit | Application: Used to punch holes on the sides of angle beam profile. Components: It is composed of punching cylinder, column plate, mold base, Bracket, indenter, worktable, etc. There are two or three sets of punching dies on each side, and two or three punches with different diameters can be installed. | |
| Traverse mechanism | Application: It is used to drive the mold base to move along the screw direction to control the punching criterion. Drive mode: Panasonic servo motor drive. Transmission mode: precision screw transmission. Protection measures: Dust-proof bearings are used in the bearing housing, and the sheet metal shield prevents the servo motor from being polluted by dust. | |
| Model selection mechanism | Application: It is used to select the die position for punching of the corresponding die position. Each side of the punching unit can be equipped with two or three different specifications of punches, and each punch is equipped with a cylinder. A cushion block is connected to the cylinder piston rod, and the cushion block is installed between the punch rod and the cylinder pressure head. According to computer instructions, the punch is automatically selected, that is, the corresponding cylinder is selected to push the corresponding cushion. | |
Punching and pressing device | Application: Used to press the Angle steel when punching, so that the hole out of the precise position. Components: It is composed of pressing cylinder, pressing fork, turning arm, twisting shaft, etc. | |
Retainer device | Application: Used for lifting Angle steel to prevent raw materials from colliding with datum surface inside main engine. When the Angle is fed into the main engine from the feed passage, the cylinder extends out to lift the Angle, and when punching or shearing, the cylinder returns, and the Angle falls to the datum. | |
| Shearing unit | Application: For cutting Angle steel. Components: by the shear gantry, shear cylinder, shear knife box. | |
| CNC electrical cabinet | Application: Control system. Components: by the upper computer, power supply, servo amplifier, transformer, PLC module, etc. Just input the size of the workpiece, automatic generation of processing program, can also accept the lofting software generated by the workpiece processing program.It can be stored, called and displayed at any time by item number. | |
| Hydraulic unit | Application: Power source of equipment. Components: three-phase asynchronous motor, accumulator, oil tank, hydraulic pump |
| Item | Origin or brand |
| breaker | Schneider (French brand) or Eaton-Müller (American brand) |
| Motor switch | Schneider (French brand) or Eaton-Müller (American brand) |
| AC contactor | Schneider (French brand) or Eaton-Müller (American brand) |
| thermal relay | Schneider (French brand) or Eaton-Müller (American brand) |
| Small relay | Weidmüller (German brand) |
| Servo transformer | Lamp |
| Control transformer | Lamp |
| Power Supply | MEAN WELL |
| Proximity switch | Lanbao |
| Programmable Controller PLC | Yokogawa |
| servo motor | Panasonic |
| server Driver | Panasonic |
| Hydraulic solenoid valve | Atos, Italy or Hawe, Germany |
| Ball screw | Taiwan |
| cable | Shanghai Shenbin |
| Twisted-pair shielded cable | Germany and Rou |
| Buttons, knobs, indicator lights | Siemens APT |
| Key switch | Siemens APT |
| Industrial bolt | Wien Heavy Load or Shanghai Warren |
| Business computer | Lenovo |
| Pneumatic solenoid valve | Taiwan Xin Gong or Taiwan AirTAC |
| Magnetic switch | AirTAC Taiwan |
| cylinder | AirTAC Taiwan |
| Hydraulic pump | American Wicks or American Parker Denison |