Products

Factory Direct Sale Refractory Silicon Carbide Sagger Sic Graphite Crucible for Aluminum Melting

China Factory Direct Sale Refractory Silicon Carbide Sagger Sic Graphite Crucible for Aluminum Melting, Find details about China Crucible, Silicon Carbide Crucible from Factory Direct Sale Refractory Silicon Carbide Sagger Sic Graphite Crucible for Aluminum Melting

Application
Smelt Metal/Casting
Brand
Zhuxie
Our Advantage
Corrosion Resistance / High Temperature Resistance
Transport Package
Wooden Packing Box
Origin
Zibo, Shandong
HS Code
6903900000
Application
Smelt Metal/Casting
Brand
Zhuxie
Our Advantage
Corrosion Resistance / High Temperature Resistance
Transport Package
Wooden Packing Box
Origin
Zibo, Shandong
HS Code
6903900000
Factory Direct Sale Refractory Silicon Carbide Sagger Sic Graphite Crucible for Aluminum MeltingFactory Direct Sale Refractory Silicon Carbide Sagger Sic Graphite Crucible for Aluminum MeltingFactory Direct Sale Refractory Silicon Carbide Sagger Sic Graphite Crucible for Aluminum Melting
Advanced technology
Crucibles are manufactured by the worlds most advanced cold isostaticmolding method, with isotropic properties, high density high strength, denseuniform and defect-free		Great variety of goods
Produce resin bond and clay bond crucible, Provide the best solution fordifferent customers, to extend the service life
Long life
Crucible life is 2-5 times longer than ordinay		Resistance to chemical attack
Advanced materials and glaze recipes, effectively resistance to chemicalerosion
High thermal conductivity
Usingnatural graphite materials and isostatic pressing, thin crucible wallfast heat conduction		Resistance to hightemperature
Crucible temperature range 400-1400ºC 
Energy-saving
Crucible made of high thermal conductivity material can bring a largenumber of energy savings for users in the production process.		Less pollution
Because of the choice of high purity inorganic material, little or no harmfulimpurities into products in the metal melting process
Good oxidation resistance
The appearance of a crucible has multi-special glaze layers, ciupled withthe molding material compact, greatly improving the corrosion resistance ofthe product, and extending the life of the crucible		Stable and reliable quality
Part of the main raw materials of foreign well-known brands used glazesmainly using imported raw materials. The quality is stable and reliable
Factory Direct Sale Refractory Silicon Carbide Sagger Sic Graphite Crucible for Aluminum MeltingFactory Direct Sale Refractory Silicon Carbide Sagger Sic Graphite Crucible for Aluminum Melting
PREHEATING PROCEDURE OF CRUCIBLE USED FOR THE FIRST TIME 
1. After the crucible is put into the furnace, the crucible is heated slowly, and the temperature reaches 200 ºCC after two hours to remove the warm gas in the crucible 
2. Then the crucible was heated to 600 ºC after 15 hours with low power, and then the temperature was 950 °C after half an hour with full heating power, holding for about 1 hour. In this way, the glaze layer can be fully melted, the oxidation resistance can be improved, and the maximum service life of the crucible can be ensured 
3. Heat preservation for 1 hour before feeding as required
4. The curve is shown in the green line 
THE PREHEATING PROCEDURE FOR REUSING THE CRUCIBLE IS AS FOLLOWS
1. Firstly, the crucible is heated slowly, and the temperature reaches 600 ºC after two hours to remove the moisture in the crucible. At the same time, the glaze layer and anti-oxidation coating on the surface of the crucible are fully sintered to prevent oxidation and prolong the service life of the crucible
2. Then continue heating, and make the temperature reach 950 ºC after half an hour, holding for about 1 hour.
3. Heat preservation for 1 hour before feeding as required
4. The curve is shown in the red line
Instructions for use:
1,Store crucibles in a dry , warm place or wooden palate
2,Do not stock inside another
3,Do not roll crucibles
4,Use creramic fiber blanket to seal , interspace of cover and sides of furnace
5,Use locating bricks in tilting furnaces,to interspace of expansion
6,Tangential fire around crucible
7,Add flux after metal is molten
8,Avoid premature crucible failure by ensuring that the furnace drain hole is sealed
9,For lift-out ,tongs must be placed on lower third crucible . fit tongs evenly on both side
10,Check for cracks or other damage during transporting before use
11,Base block must be flat , larger than crucible bottom and centered
12,Use tongs and ingots should be placed carefully into the crucible
 
Factory Direct Sale Refractory Silicon Carbide Sagger Sic Graphite Crucible for Aluminum Melting
Our Advantages

About packaging:

The products in the wooden packing box are packed in PE moisture-proof bags. Or can be customized according to your requirements
About products:
Our strengths:
1,Long life :Crucible life is 2-5 times longer than ordinay
2,Resistance to chemical attack :Advanced materials and glaze recipes,effectively resistance to chemical erosion
3,High thermal conductivity Usingnatural grephite materials and isostatic pressing,thin crucible wall, fast heat conduction
4,Resistance to high temperature: Crucible temperature range 400-2000ºC
5,Energy-saving :Crucible made of high thermal conductivity material can bring a large number of energy savings for users in the production process.
6,Less pollution :Because of the choice of high purity inorganic material ,little or no harmful impurities into products in the metal melting process
7,Good oxidation resistance :The appearance of a crucible has multi-special glaze layers ,ciupled with the molding material compact ,greatly improving the corrosion resistance of the product, and extending the life of the crucible
common problem

 

Factory Direct Sale Refractory Silicon Carbide Sagger Sic Graphite Crucible for Aluminum Melting

 

FAQ

1. How can I get your prompt quotation?

A: we can give you reply with quotation quickly if you kindly send the inquiry with following factors:
 top diameter, bottom diameter, thickness, height, application and quantity. 

2.What's the MOQ of the order?
No limit, we can offer the best suggestions and solutions according to your condition.

3. How to solve the quality problems?
If the products don't conform to customer's samples or have quality problems, our company will be responsible for it.

4. How to solve the packaging?
We use wooden box packaging

5. Product delivery cycle?
the product production cycle is 12 days, the specific production quantity and cycle look forward to your negotiation

6. What are the transportation logistics?
by sea, by air, by courier, by post, etc.

7. Can it be customized?
We accept customization.

8.We have professional designers.

9.We have a professional after-sales department to answer your questions.

You Might Also Like